• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.309-317
• /
• 1992

Inorganic/organic composite was synthesized by using sol-gel process, and the bonding characteristics of composite was investigated with glass transition temperature(Tg), measured by DMTA(Dynamic Mechanical Thermal Analyzer). It was found from shift of Tg to higher temperature that composite reaction was proceeded better with the amount of HCl and water. But Tg was not varied with reaction time.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.231-238
• /
• 1993

The thermal behavior of binder in multi-layer actuator has an effect on the properties of actuator. Binder burn-out process and thermal degradation mechanism of PNN-PZT/Acrylic binder were analyzed by FTIR, DSC, TGA. Binder was burnt out by two step. In oxygen atomsphere, thermal degradation was activated and final residue was minimized to 5%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.53-62
• /
• 2016

The current trends of product customization and repair of high value parts with individual defects demand automation and a high degree of flexibility of the involved manufacturing process chains. To determine the corresponding requirements this paper gives an overview of manufacturing process chains by distinguishing between horizontal and vertical process chains. The established way of modeling and programming processes with CAx systems and existing approaches is shown. Furthermore, the different types of possible adaptions of a manufacturing process chain are shown and considered as a cascaded control loop. Following this it is discussed which key requirements of repair process chains are unresolved by existing approaches. To overcome the deficits this paper introduces repair features which comprise the idea of geometric features and defines analytical auxiliary geometries based on the measurement input data. This meets challenges normally caused by working directly on reconstructed geometries in the form of triangulated surfaces which are prone to artifacts. Embedded into function blocks, this allows the use of traditional approaches for manufacturing process chains to be applied to adaptive repair process chains.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.6 no.2
• /
• pp.51-55
• /
• 1981

In both continuous-review and periodic-review non-stationary inventory systems, the non-stationary Poisson demand process and the associated inventory position processes were proved being mutually independent of each other, which lead to the probability distribution of the corresponding net inventory position process in the form of a finite product sum of those two process distributions. It is also discussed how these results can correspond to analytical stochastic inventory cost function formulations in terms of the probability distributions of the processes.

• Design & Manufacturing
• /
• v.12 no.3
• /
• pp.5-12
• /
• 2018

Plastic containers which provides the opportunity to reduce transportation costs are lighter and less brittle than glass containers. As a results, efforts to replace glass with plastic are ongoing. The blow molding method is a typical approach in producing plastic containers. Single-stage injection blow molding (ISBM) is one of the blow molding methods. However, the difficulty in controlling the temperature during the injection molding process is considered its main disadvantage. In this study, ISBM process analysis of relatively thick walled containers such as cosmetic containers is carried out. The initial temperature distribution of the preform is deemed to be the most influential factor in the accuracy of blow molding for the thick vessel. In order to accurately predict this, all heat transfer processes of the preform are considered. The validity of this analytical procedure is verified by comparing the cross-sectional thickness with the actual product. Finally, the validated analytical method is used to evaluate the factors affecting the thickness of the final molded part. The ISBM analysis technique for thick walled vessels developed through this study can be used as an effective predictor for preform design and blow process.

• Knowledge Management Research
• /
• v.13 no.3
• /
• pp.55-77
• /
• 2012

Selecting promising technology is becoming more and more difficult due to the increased number and complexity. In this study, we propose hybrid AHP/DEA-AR method and hybrid AHP/DEA-AR-G method to evaluate efficiency of technology alternatives based on ordinal rating data collected through survey to technology experts in a certain field and select efficient technology alternative as promising technology. The proposed method normalizes rating data and uses AHP to derive weights to improve the credibility of analysis, then in order to avoid basic DEA models' problems, use DEA-AR and DEA-AR-G to evaluate efficiency of technology alternatives. In this study, we applied the proposed methods to clean technology and compared with the basic DEA models. According to the result of the comparison, we can find that the both proposed methods are excellent in confirming most efficient technology, and hybrid AHP/DEA-AR method is much easier to use in the process of technology selection.

• Geomechanics and Engineering
• /
• v.37 no.1
• /
• pp.9-19
• /
• 2024

This study presents an energy analysis for large-strain cavity expansion problem based on the general strength criterion and energy theory. This study focuses on the energy dissipation problem during the cavity expansion process, dividing the soil mass around the cavity into an elastic region and a plastic region. Assuming compliance with the small deformation theory in the elastic region and the large deformation theory in the plastic region, combined with the general strength criterion of soil mass and energy theory, the energy dissipation solution for cavity expansion problem is derived. Firstly, from an energy perspective, the process of cavity expansion in soil mass is described as an energy conversion process. The energy dissipation mechanism is introduced into the traditional analysis of cavity expansion, and a general analytical solution for cavity expansion related to energy is derived. Subsequently, based on this general analytical solution of cavity expansion, the influence of different strength criterion, large-strain, expansion radius, cavity shape and characteristics of soil mass on the stress distribution, displacement field and energy evolution around the cavity is studied. Finally, the effectiveness and reliability of theoretical solution is verified by comparing the results of typical pressure-expansion curves with existing literature algorithms. The results indicate that different strength criterion have a relatively small impact on the displacement and strain field around the cavity, but a significant impact on the stress distribution and energy evolution around the cavity.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.527-531
• /
• 2004

Treatment with aqueous sodium hydroxide solution plays an important role to impart certain desirable properties - feel and luster on the surface of polyester fiber. In this process alkali wastewater contains disodium terephthalate, ethylene glycol (EG) and residual sodium hydroxide. In this paper we report a new method containing the pretreatments of derivatization with benzoyl chloride and solvent extraction using pentane. The calibration curve of EG determined by GC/MS-SIM shows a good linearity in the range of 0.1 to $25{\mu}g/mL$ having the standard deviation of ${\leq}8.7%$. The recovery and the detection limit of this method are 91.9-93.7% and $0.05{\mu}g/mL$ respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.847-850
• /
• 1997

This paper presents a strategy to develop the environmentally conscious machining process. To establish the knowledge the analytical and experimental methodology for he prediction of aerosol concentration due to cutting fluid atomization mechanism in machining operation. The established analytical model which is based on atomization theory analyzes the cutting fluid motion and aerosol generation in machining process. The impinging and evaporation experiments were performance to know the particle size ad evaporation rate of cutting fluid. The predictive models can be used as a basis for environmental impact analysis on the shop floor. It can be also facilitate the optimization of cutting fluid usage in achieving a balanced consideration of productivity and environmental consciousness.