• Journal of Animal Environmental Science
• /
• v.14 no.2
• /
• pp.129-138
• /
• 2008

This study was carried out to investigate the operating characteristics, water balance and chemical properties of compost during the composting with pig slurry on-farm trial. The composting plant with sawdust pile filteration was done in a forced aeration inside a house and equipped with a turning machine moving on a rails. The composting pit was 4.6m wide, 53m long and the maximum height was 2m. A field scale aerobic composting facility was tested the composting efficiency of high moisture pig slurry. The sawdust materials remained 6 months. Pig slurry was added to compost pile every other day during 6 months run. The temperature in compost pile and compost house, and input and output of moisture were measured during composting process. The result are summarized as follows; 1. The temperature of compost was varied in range of at $22.4^{\circ}C{\sim}71.1^{\circ}C$. After turning, the composting temperature decreased to $50^{\circ}C{\sim}36^{\circ}C$ during $3{\sim}5$ hours, and then raised to $64.5^{\circ}C$ 2. The temperature of compost house was maintained $20^{\circ}C{\sim}30^{\circ}C$, and relative humidity was varied in range of $50{\sim}99%$. 3. BOD, CODcr and SS of leachate water was reduced 89.5%, 81.2%, 97.5%, respectively. 4. The content of heavy metal in the final compost was lower those of Korea standards. 5. The amount of effluent was 10.2%. Total evaporation during composting Period were 74.8%. The amount of slurry per $1m^3$ sawdust was $3.16m^3$ without treatment of effluent output.

• Korean Security Journal
• /
• no.41
• /
• pp.37-66
• /
• 2014

In recent years, with the development of computers and electronics, electronics and communication technology in a growing and each part is dependent on the cross-referencing makes all electronic equipment is obsolete due to direct or indirect damage EMP. Korea and the impending standoff North Korea has a considerable level of technologies related to the EMP, EMP weapons you already have or in a few years, the development of EMP weapons will complete. North Korea launched a long-range missile and conducted a nuclear test on several occasions immediately after, when I saw the high-altitude nuclear blackmail has been strengthening the outright offensive nuclear EMP attacks at any time and practical significance for the EMP will need offensive skills would improve. At this point you can predict the damage situation of Korea's security reality that satisfy the need, more than anything else to build a protective system of the EMP. The scale of the damage that unforeseen but significant military damage and socio-economic damage and fatalities when I looked into the situation which started out as a satellite communications systems and equipment to attack military and security systems and transportation, finance, national emergency system, such as the damage elsewhere. In General, there is no direct casualties reported, but EMP medical devices that rely on lethal damage to people who can show up. In addition, the State power system failure due to a power supply interruption would not have thought the damage would bring State highly dependent on domestic power generation of nuclear plants is a serious nuclear power plant accident in the event of a blackout phenomenon can lead to the plant's internal problems should see a forecast. First of all, a special expert Committee of the EMP, the demand for protective facilities and equipment and conduct an investigation, he takes fits into your budget is under strict criteria by configuring the contractors should be sifting through. He then created the Agency for verification of performance EMP protection after you have verified the performance of maintenance, maintenance, safety and security management, design and construction company organized and systematic process Guard facilities or secret communications equipment and perfect for the EMP, such as protective equipment maneuver system should take.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.137-142
• /
• 2011

$TiO_2$-coated bamboo activated carbon has been prepared and utilized under UV irradiation as a pretreatment method for an effective biodegradation of the recalcitrant polyaromatic hydrocarbons (PAHs). The anatase $TiO_2$ was successfully coated on the bamboo activated carbon (AC) and it showed the highest photoactivity against methylene blue. In the absence of the PAHs-degrading bacteria PAHs having low molecular weight (i.e., naphthalene, acenaphthylene, acenaphthene, and fluorene) were degraded by 9.8, 76.2, 74.1, and 40.5%, respectively. Higher molecular weight PAHs, however, maintained high residual concentrations of PAHs (400-1,000 ${\mu}g$/L) after the same treatment. On the other hand, the overall concentrations of PAHs became lower than 340 ${\mu}g$/L when the pretreated PAHs were subjected to biodegradation by a PAH-degrading consortium for a week. Herein, phenanthrene, anthracene, fluoranthene, and pyrene were removed by 29.3, 61.4, 27.0, and 44.3%, respectively, indicating the facilitated potential biodegradation of PAHs. Activated carbon coated with $TiO_2$ appeared to inhibit growth of PAH degraders on the surface of AC, indicating planktonic degraders were dominantly involved in the PAH biodegradation in presence of the $TiO_2$-coated bamboo AC. It was proposed that an effective remediation technology for the recalcitrant PAHs could be developed when an optimum pretreatment process is further established.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.51-60
• /
• 2003

In the radical char]go of the business environments that the existing facilities can not guarantee the business-frosts anymore, enterprises have been importing ERP system. In Korea, Sam-sung Electronics did it for the first tin in the latter half of 1994 and other enterprises succeeded. Currently, government and public enterprises as well as most of the large enterprises are employing ERP system to sharpen the competitiveness and to win the business transparency. On the other hand, it is harder for small and medium enterprises shaded by the large enterprises to be well-equipped with information system such as ERP, because they have already suffered from chronic financial difficulties and shortage of many resources. Most of all, they prefer the short-term project that does not need much tine for them to make decisions and to carry out fully. Grounded on the above factors, in this work, I suggest the suitable ERP model for the small and medium enterprises and the successful importing process of ERP, which is derived from the previous researches made by other masters' thesis. If necessary information and human resources are interchanged pertinently between local education institute and small and medium enterprise, the latter could not only deal with the confronted difficulties successfully inside and outside but attain the goal of being proficient in up-to-minute high technology. Besides, giving the students the opportunity of researching into the practice of the business they have not ever known, local universities could help their students accumulate knowledges and acquire ideas which could not be achieved in pure academic studies. When the above-mentioned procedure is over, the students might get the intellectual faculty to ponder on the future more concretely and enter a profession more carefully. In the result, we would raise up the percentage of the employment among the graduates. And active participation of university professors is the last important factor that assists the small and medium enterprises for introducing ERP system successfully. Their scholarly attainments play an important role in strengthening local economy and make the business competitiveness balanced between the capital and the local economy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.1
• /
• pp.40-50
• /
• 1990

The purpose of this paper is to develop a colorant from krill, Euphausia superba, process wastes for use in food products. Carotenoproteins were extracted from preboiled krill processing offal(PKPO) and raw frozen krill processing offal(RKPO) with the aid of proteolytic enzymes. The long-term stability of the astaxanthin associated with the carotenoprotein by the addition of pretense inhibitor and antioxidant to the product were also investigated. Total astaxanthin contents of PKPO and RKPO were $35.1mg\%,\;22.1mg\%$ and those in carotenoproteins were $98.6mg\%,\;61.9mg\%$, respectively. The chitin contents of PKPO and RKPO were $6.9\%,\;4.5\%$, however, those of carotenoproteins were not determined. When $0.5\%$ trypsin was added to the extraction medium containing 0.5M $Na_3EDTA$ at $4^{\circ}C,\;74\%$ of astaxanthin and $83\%$ of the protein of PKPO were recovered as carotenoprotein in 24hrs. The amino acid profile in carotenoprotein was mainly composed of glutamic acid, methionine, aspartic acid and isoleurine. Their contents amounted to about 40% of the total amino acids, followed by alanine, phenylalanine, Iysine, leucine, threonine and tyrosine in that order, with a small amount of cysteine and tryptophan. The levels of essential amino acids were high as much as $38.3\%\~43.6\%$ of the total amino acids. The maximum observance of the carotenoid fraction from krill processing offal and from carotenoprotein was 469nm in petroleum ether. The separated components of carotenoprotein by TLC had Rfs $0.20\~0.23\;0.56\~0.60$ and $0.88\~0.91$. The carotenoids were comprised of astaxanthin, astaxanthin monoester and asthaxanthin diester in $25\~30\%\;,35\~40\%$and $40\~45\%$, respectively. The loss of carotenoids in the carotenoprotein can be prevented by the addition of pro-tease inhibitor(trasylol) and antioxidant(BHT) below $4^{\circ}C$.

• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.83-89
• /
• 2011

Various functional and useful components in Portulaca oleracea were extracted with ethanol and the optimum solvent conditions were set by monitoring of response surface methodology(RSM). A central composite design for optimization was applied to investigate the effects of the three independent variables of extraction temperature, ethanol concentration, and extraction time, on dependent variables including total phenolics, electron-donating ability, brown clolor and total flavonoids of Portulaca oleracea. The content of total phenol was essentially unaffected by extraction time or extraction temperature, but it was highly influenced by ethanol concentration. The maximum total phenol content was 31.70mg/mL obtained at 45.84% of ethanol concentration, $79.66^{\circ}C$, and after 2.67hr of extraction. Electron-donating ability (EDA) was affected by ethanol concentration and the maximum EDA was 74.67mg/mL at 52.95% ethanol concentration, $52.33^{\circ}C$ and 4.84hr of extration time. The browning color was rarely affected by extraction time but, it was highly influenced by ethanol concentration and extraction temperature. The maximum extent of browning color was obtained at 97.75% of ethanol concentraion, $65.88^{\circ}C$ and 2.93hr of extraction time. The content of total flavonoid was significantly influenced by extraction time, and the maximum total flavonoid level was 58.28mg/mL obtained at 96.62% ethanol concentration, $61.87^{\circ}C$ after 3.70hr of extraction. As a result, The optimal conditions for effective extraction were predicted as follows, 70.3% of ethanol concentration, $62.1^{\circ}C$ of extraction temperature and 3.3hr of extraction time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.202-213
• /
• 2007

A network is an important model widely used in natural and social science as well as engineering. To analyze these networks easily it is necessary that we should layout the features of networks visually. These Graph-Layout researches have been performed recently according to the development of the computer technology. Among them, the Scale-free Network that stands out in these days is widely used in analyzing and understanding the complicated situations in various fields. The Scale-free Network is featured in two points. The first, the number of link(Degree) shows the Power-function distribution. The second, the network has the hub that has multiple links. Consequently, it is important for us to represent the hub visually in Scale-free Network but the existing Graph-layout algorithms only represent clusters for the present. Therefor in this thesis we suggest Graph-layout algorithm that effectively presents the Scale-free network. The Hubity(hub+ity) repulsive force between hubs in suggested algorithm in this thesis is in inverse proportion to the distance, and if the degree of hubs increases in a times the Hubity repulsive force between hubs is ${\alpha}^{\gamma}$ times (${\gamma}$??is a connection line index). Also, if the algorithm has the counter that controls the force in proportion to the total node number and the total link number, The Hubity repulsive force is independent of the scale of a network. The proposed algorithm is compared with Graph-layout algorithm through an experiment. The experimental process is as follows: First of all, make out the hub that exists in the network or not. Check out the connection line index to recognize the existence of hub, and then if the value of connection line index is between 2 and 3, then conclude the Scale-free network that has a hub. And then use the suggested algorithm. In result, We validated that the proposed Graph-layout algorithm showed the Scale-free network more effectively than the existing cluster-centered algorithms[Noack, etc.].

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.525-536
• /
• 2014

In this study, a method to assess and monitor hydrological drought using remote sensing was investigated for use in regions with limited observation data, and was applied to the Upper Namhangang basin in South Korea, which was seriously affected by the 2008-2009 drought. Drought information may be obtained more easily from meteorological data based on water balance than hydrological data that are hard to estimate. Air temperature data at 2 m above ground level (AGL) were estimated using remotely sensed data, evapotranspiration was estimated from the air temperature, and the correlations between precipitation minus evapotranspiration (P-PET) and streamflow percentiles were examined. Land Surface Temperature data with $1{\times}1km$ spatial resolution as well as Atmospheric Profile data with $5{\times}5km$ spatial resolution from MODIS sensor on board Aqua satellite were used to estimate monthly maximum and minimum air temperature in South Korea. Evapotranspiration was estimated from the maximum and minimum air temperature using the Hargreaves method and the estimates were compared to existing data of the University of Montana based on Penman-Monteith method showing smaller coefficient of determination values but smaller error values. Precipitation was obtained from TRMM monthly rainfall data, and the correlations of 1-, 3-, 6-, and 12-month P-PET percentiles with streamflow percentiles were analyzed for the Upper Namhan-gang basin in South Korea. The 1-month P-PET percentile during JJA (r = 0.89, tau = 0.71) and SON (r = 0.63, tau = 0.47) in the Upper Namhan-gang basin are highly correlated with the streamflow percentile with 95% confidence level. Since the effect of precipitation in the basin is especially high, the correlation between evapotranspiration percentile and streamflow percentile is positive. These results indicate that remote sensing-based P-PET estimates can be used for the assessment and monitoring of hydrological drought. The high spatial resolution estimates can be used in the decision-making process to minimize the adverse impacts of hydrological drought and to establish differentiated measures coping with drought.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.555-559
• /
• 2012

Manures contain a variety of pathogenic microorganisms that pose a risk to human or animal. On-farm contaminations through contaminated manure were considered likely sources of the pathogen for several outbreak. Pathogenic microorganisms may survive in low numbers during the composting process and subsequently regrow to high levels under favorable conditions. The objective of this study was to investigate effect of temperature on survival of Salmonella enterica and Staphylococcus aureus in livestock manure compost. Commercial livestock manure compost (manure 60%, sawdust 40%) was inoculated with S. enterica and S. aureus. Compost was incubated at four different temperatures (10, 25, 35, and $55^{\circ}C$) for 20 weeks. Samples were taken every week during incubation depending on the given conditions. S. enterica persisted for up to 1 day in livestock manure compost at $55^{\circ}C$, over 140 days at $10^{\circ}C$, 140 days at $25^{\circ}C$, and 70 days at $35^{\circ}C$, respectively. S. aureus persisted for up to 1 day in livestock manure compost at $55^{\circ}C$ and 90 days at $10^{\circ}C$, 70 days at $25^{\circ}C$, and 40 days at $35^{\circ}C$, respectively. The results indicate that S. enterica and S. aureus persisted longer under low temperature condition. S. enterica survived longer than S. aureus at three different temperatures (10, 25, and $35^{\circ}C$). This study will provide useful and practical guidelines to applicators of soil in deciding appropriate handling and time frames for land application of livestock manure compost for sustainable agriculture. Results from these studies provide useful information in identifying manure handling practices to reduce the risk of S. enterica and S. aureus transmission to fresh produce.