• 소성∙가공
• /
• 제31권2호
• /
• pp.57-63
• /
• 2022

The current study performed formability analysis of a heat exchanger separator for an electric vehicle to apply a high-strength aluminum sheet based on parametric analysis. Mechanical properties for sheet metal forming simulation were evaluated by tensile test, bulge test, and Nakajima test. Two-stage crash forming was established by considering the mass production process using conventional low-strength aluminum sheets. In this study, FEM for the two-stage forming process was conducted to optimize the corner radius and height for improving the formability. In addition, the possibility of a one-stage forming process application was confirmed through FEM. The prototype of the sample was manufactured as FEM results to validate the parametric analysis. Finally, this result can provide a one-stage forming process design method using the high-strength aluminum sheet for weight reduction of a heat exchanger separator for an electric vehicle.

• 성인간호학회지
• /
• 제18권3호
• /
• pp.345-356
• /
• 2006

Purpose: This study was conducted to compare the process of change, decisional balance, and self-efficacy according to the stages of change of exercise on the basis of the Transtheoretical Model in order to investigate factors associated with the change of exercise in adult diabetic patients. Method: Data were collected from January to April 2005. The subjects were 160 patients in the G university hospital and public health center in J city. Results: The entire process of change showed the significant difference depending on the stage of change(F=20.007, p=.000). For each process of change, the Consciousness Raising(F=14.602, p=.000), Dramatic Relief(F=7.751, p=.000), Environmental Re-evaluation(F=11.843, p=.000), Self Re-evaluation(F=16.035, p=.000), Social Liberation(F=10.968, p=.000), Counter-conditioning (F=24.090, p=.000), Helping Relationships(F= 7.625, p=.000), Reinforcement Management(F= 16.693, p=.000), Self Liberation(F=11.990, p= .000) and Stimulus Control(F=4.020, p=.002) demonstrated significant differences depending on the stages of change of exercise. For the decisional balance, the Pros showed the significant difference depending on the stage of change(F=14.121, p=.000). For the self efficacy showed significant difference depending on the stage of change(F=17.137, p=.000). Conclusion: In order to proceed the stage of change of exercise in patients with Diabetes Mellitus, intensive use of a specific process of change, a stage of change matching is needed.

• Management Science and Financial Engineering
• /
• 제13권2호
• /
• pp.141-157
• /
• 2007

In this paper, we address a design problem and a case study of a K-stage back-light-unit(BLU) inspection system, which is composed of K stages, each of which includes an inspection process and a rework process. Assuming the type I, II errors and the inspection-free policy for items classified as good, we determine the smallest integer of K which can achieve a given target defective rate. If K does not exist, holding the current values of the type I, II errors, we search reversely the defective rate of an assembly line and the defective rate of a rework process, to meet the target defective rate. Our formulae and methodology based on a K-stage inspection system could be applied and extended to similar situations with slight modification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.899-904
• /
• 2003

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based support for this integration is desirable. For this integration and process planning in the early design stage. the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function or product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.95-98
• /
• 1999

In this study, a method to find the optimal intermediate die geometry for the multi-stage drawing process for the rectangular rod from a round bar is proposed and a program using the proposed method is developed. On the stage of the design of the intermediate die geometry, the virtual die was constructed using the initial billet as a inlet of the drawing die and the final product as a exit of that and the virtual die was divided by the number of pass. Divided die was transformed into the rectangular one which is the intermediate die geometry for the multi-stage rectangular drawing process. In order to verify the application of the proposed method on the real industrial product, the drawing of the rectangular rod from a round which composed two stage has been performed and simulated by the three dimensional rigid plastic finite element method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.111-118
• /
• 1995

A method of determining an optimum blank shape for the non circular deep drawing process is more investigated and applied to the balnk design for multi-stage deep drawn product. The forming procedure of two-stage deep drawing process is looked over and the method of determining a blank shape is proposed. In experimental research, a optimum blank and a optional rectangular blank were considered and we measured thickness strain distributions. We could predict a strain distribution and compare with a experimental strain distribution. Also, the strain distributions for the blank shapes, optimum and rectangular, were compared.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• 가정과삶의질연구
• /
• 제25권1호
• /
• pp.183-207
• /
• 2007

The purpose of this study was to improve the understanding of the essential experience of Separated Families in South and North Korea in a socio-cultural context and to explore their post-separation adjustment process from the perspective of the families. Major findings in this study are summarized as follows. First, 'han' was the central phenomenon that the participants experienced following their separation. Second, the core issue in the process of post-separation adjustment was 'accepting the separation and rearrangement of reality for reunion', and over time the participants went through four stages in their adjustment process: the stage of being overwhelmed, the stage of conflict, the stage of awareness, and the stage of acceptance. Third, the main factors affecting the participants' adjustment were supportive systems, available resources(individual variables) and interaction with other separated families. fourth, four types were observed in the typology of adjustment and reunion of the participants.

• International Journal of Contents
• /
• 제8권1호
• /
• pp.100-107
• /
• 2012

While considerable research suggests that users' uncertainty gradually decreases, as they proceed through the information seeking process, others argue that it can arise at any stage of their information seeking process. Reflecting the latter view, this study examined user perceptions of uncertainty in the final stage of users' information seeking process, the stage of search results evaluation. Considering the significance of Web search engines for academic study, this study investigated the relevance decision stage of scholarly researchers in the field of science, who use Web search engines for their academic study. Based on the analysis of the users' uncertainty, this study provided implications to improve information systems and Web contents design.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권9호
• /
• pp.417-422
• /
• 2001

The brushless DC motor(BLDCM) is widely used in many applications. One of the application of the BLDCM is the stage which is one of process in the semiconductor manufacturing processes. Very high performance is required in the stage process. In this paper, the 1 degree of freedom positioning system for the basic technology of the stage is studied. The linearization method is proposed to make the controller design procedures easy by measuring the thrust force ripple using the strain gauge. And through the experiments, it is proved that the inner velocity control loop is necessary to make more precise positioning control system.