• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.105-115
• /
• 2017

This paper describes a project - based quality management model that identifies development technologies and codes while at the same time verifying the ability to implement processes that are essential in R & D projects. In order to verify the process implemented in the R & D project implementation, there are review, checking points, and evaluating methods the process performance levels for five processes such as defining requirements which is the beginning stage of system development, testing process which is the completion stage of system development, and project management and peer review process for project management and support in the proposed project-based quality management model. For development technology and code validation, the model included the documented test cases for each requirement by the developer in the requirements definition stage, debugging and testing in the design and implementation stages, static analysis and open source licence verification procedure, and system environment. After applying the model in SW development R&D project for evaluating the process performance, and verifying the development technology and the code, the developers responded that the improvement in the development technique and the code, and upgrade of process performance level for project are more than 10%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.107-113
• /
• 2022

At present, it is possible to manufacture electrodes down to several micrometers (~ ㎛) using inkjet printing technology owing to the development of precision ejection heads. Inkjet printing technology is also used in the manufacturing of bio-sensors, electronic sensors, and flexible displays. To reduce the difference between the electrode design/simulation performance and actual printing pattern performance, it is necessary to analyze and optimize the processable area of the ink material, which is a fluid. In this study, process optimization was conducted to manufacture an IDE pattern and fabricate an impedance sensor. A total of 25 IDE patterns were produced, with five for each lamination process. Electrode line width and height changes were measured by stacking the designed IDE pattern with a nanoparticle-based conductive ink multilayer. Furthermore, the optimal process area for securing a performance close to the design result was analyzed through impedance and capacitance. It was observed that the increase in the height of stack layer 4 was the lowest at 4.106%, and the increase in capacitance was measured to be the highest at 44.08%. The proposed stacking process pattern, which is optimized in terms of uniformity, reproducibility, and performance, can be efficiently applied to bio-applications such as biomaterial sensing with an impedance sensor.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.3 s.32
• /
• pp.43-55
• /
• 2006

Recently, increases of leisure activities and 5-day workweek system enforce government employ rural tourism policy and projects. Operating projects are Green Rural Experience Village, Rural Tradition Theme Village, etc. In this study under investigation of Green Rural Experience Village site, Green-Tourism performance indicators were developed. Green-Tourism performance indicators of rural village were developed by BSC(balanced scorecard) and AHP(Analytic hierarchy process). Four perspective of BSC are divided into financial perspective, customer, internal-business process, and teaming and growth perspectives. To develop green-tourism performance indicators of rural village, low perspectives of BSC are converted into investment effect, visitor, internal process, and village inhabitants perspectives. By these perspectives, green-tourism performance indicators of rural village were developed. Weighting values on importance were calculated by AHP. Performance indicators developed in this study applied in 12 villages. With the result, generally well-known villages gained high score, and in accord with survey content.

• The Korean Journal of Health Service Management
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2011

The purpose of this paper was to evaluate performance of information system for one national university hospital in order to identify the factors influencing performance of information system. KPIs were collected for 181 users of information system (41 doctors, 104 nurses, and 11 medical supporting staffs, and 25 administrative staffs) from August 10 to 24, 2010. The results were as follows: Average performance score for input layer was 3.16; average performance score for process layer was 3.35; and average performance score for business layer was 3.57. Scores for input layer was lowest for nurses and scores for process and business layer were lowest for doctors. Results from the path analysis showed that system quality, demographic characteristics, and security significantly influenced management process but these factors except demographic characteristics influenced user satisfaction; and management process also significantly influenced user satisfaction.

• The Journal of Information Systems
• /
• v.17 no.2
• /
• pp.1-26
• /
• 2008

SCM is one of the important key issues in Internet-based business environment. This study intends to suggest a research model to measure the influence of environmental, organizational, information technology factors on organizational performance using the four perspectives of balanced scorecard (BSC). 9 independent variables and 4 dependent variables were adopted from existing literature review. 103 companies data were collected by survey. Four hypotheses in this study were generated to analyze the positive relationship of environmental, organizational, information systems on organizational performance with 4 perspectives of BSC. The results of hypothesis testing show as follows. First, organizational performance of learning and growth perspective has a positive influence of IS maturity, process innovation, top management support, use of SCM package, IS interoperability, and objectives sharing. Second organizational performance of infernal process perspective has a positive influence of process innovation, IS interoperability, objectives sharing, top management support, use of SCM package, competitiveness, and IS maturity. Third, organizational performance of customer perspective has a positive influence of IS interoperability, objectives sharing, process innovation, IS maturity, competitiveness, and use of SCM package. Finally, organizational performance of financial perspective has a positive influence of process in innovation, use of SCM package, IS maturity, objectives sharing, IS interoperability, and top management support. The contribution of this study is that it provides a conceptual framework and empirical evidences of the causal relationship between environmental, organizational, IS factor and organizational performance with 4 perspectives of BSC.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2018

This study applied upgrades to the processes of a 10 MW wet amine $CO_2$ capture pilot plant and conducted performance evaluation. The 10 MW $CO_2$ Capture Pilot Plant is a facility that applies 1/50 of the combustion flue gas produced from a 500 MW coal-fired power plant, and is capable of capturing up to 200 tons of $CO_2$. This study aimed to quantitatively measure efficiency improvements of post-combustion $CO_2$ capture facilities resulting from process upgrades to propose reliable data for the first time in Korea. The key components of the process upgrades involve absorber intercooling, lean/rich amine exchanger efficiency improvements, reboiler steam TVR (Thermal Vapor Recompression), and lean amine MVR (Mechanical Vapor Recompression). The components were sequentially applied to test the energy reduction effect of each component. In addition, the performance evaluation was conducted with the absorber $CO_2$ removal efficiency maintained at the performance evaluation standard value proposed by the IEA-GHG ($CO_2$ removal rate: 90%). The absorbent used in the study was the highly efficient KoSol-5 that was developed by KEPCO (Korea Electric Power Corporation). From the performance evaluation results, it was found that the steam consumption (regeneration energy) for the regeneration of the absorbent decreased by $0.38GJ/tonCO_2$ after applying the process upgrades: from $2.93GJ/ton\;CO_2$ to $2.55GJ/tonCO_2$. This study confirmed the excellent performance of the post-combustion wet $CO_2$ capture process developed by KEPCO Research Institute (KEPRI) within KEPCO, and the process upgrades validated in this study are expected to substantially reduce $CO_2$ capture costs when applied in demonstration $CO_2$ capture plants.

• Journal of Technology Innovation
• /
• v.6 no.1
• /
• pp.128-162
• /
• 1998

A continuous development of new products is the lifeblood for firms that hope to maintain competency in competitive environments. Ongoing success in these environments is dependent on whether the management can choose or can't chose the proper mix of new product development strategy, new product development process, and organizational structure. Rather than considering the interrelationship among these success factors, however, most previous studies of new products development have examined these issues individually. Moreover, because past research has been unidimensional in nature, there is a lack of knowledge about how new product development strategy, process, and structure could be linked up each other. Consequently, we have no complete perspective of the linkage among new product development strategy, process, structure, and performance. The purpose of this study is to examine the new product development strategy, process, and structure of firms, and explore the effect of each on performance as well as linkage among strategy, process, strategy and structure.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2000

A variable cutting speed control model was developed to be implemented for the flexible disk grinding process Control algorithm was based on the error referred by the discrepancy between current disk angle and intended one that are pro-posed to produce desired resulting depth of cut. Controller was implemented in two different aspect One was to initiate the control law from the beginning while the other was to activate as soon as the disk start to produce ground surface i.e. The beginning of the between edges stage. Several performance analysis were conducted comparing various process parameters such as cutting force disk angle depth of cut and disk speed with respect to process transition time Tentative results revealed that controller implemented from the earlier stages of the process showed better performance than the other revealed that controller implemented from the earlier stages of the process showed better performance that the other.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.145-154
• /
• 2014

Performance based design(PBD) is the method to make a fire safety design against them after predicting the factors of fire risk in a building. Therefore, predicting fire risk in a building is very important process in PBD. For predicting fire risk of a building, an engineer of PBD must consider various factors such as ignition location, ignition point, ignition source, first ignited item, second ignited item, flash over, the state of door and fire suppression system. But, it is difficult to trust fire safety capacity of the design because the process in Korea' PBD is unprofessional and unreasonable. This paper had surveyed some cases of PBD that had been made in Korea to find the problems of the process to predict fire risk. And it have proposed the improvements of process to predict fire risk of a building.

• Transactions of Materials Processing
• /
• v.16 no.3 s.93
• /
• pp.201-209
• /
• 2007

Generally, the forming process of suspension system parts have been considered only considered with the formability and have not been considered with the durability of suspension system. But the durability of suspension system is very important characteristic for the dynamic performance of vehicle. Therefore, the suspension system should be manufactured to consider the durability as well as the formability. This paper is about an optimum forming process design with the effect of section properties to consider the roll durability of torsion beam type suspension. In order to determine the tube hydroforming process for the satisfaction the roll durability, the stamping and hydroforming simulation by finite element method were performed. And the results from finite element analysis and roll durability examination showed the tube hydroforming process of torsion beam is optimized as satisfying the durability performance.