• 대한산업공학회지
• /
• 제31권2호
• /
• pp.164-172
• /
• 2005

A loss function approach to a multiresponse problem is considered, when process parameters are regarded as random variables. The variation of each response may be amplified through so called propagation of error (POE), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. The forms of POE for each response and for a pair of responses are proposed and they are reflected in our loss function approach to determine the optimal condition. The proposed method is illustrated using a polymer case. The result is compared with the case where parameter fluctuation is not considered.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.

• 한국시뮬레이션학회논문지
• /
• 제20권4호
• /
• pp.67-79
• /
• 2011

본 연구에서는 시계열 공정데이터 관리를 위한 모델모수 기반 이상 탐지방법을 제안한다. 일반적인 공정관리에 널리 쓰이는 전통적인 통계적 관리기법의 관리도(SPC chart)는 측정되는 데이터가 특정 분포를 따르며 상관관계가 없는 상황을 가정한다. 따라서 공정데이터 형태가 시계열데이터와 같이 특정분포를 따르지 않고, 자기상관관계를 갖는다면 전통적인 관리도로는 관리에 한계를 보인다. 본 연구는 시계열을 따르는 공정의 이상을 탐지를 위한 MPBC(Model Parameter Based Control-chart) 방법을 제안한다. 제안된 MPBC는 시계열공정을 모델링하고, 모델모수의 변화를 감지하여 공정의 이상을 탐지하는 방법이다. 시계열 공정은 ARMA(p,q) 모델을 가정하며, RLS(Recursive Least Square)를 이용하여 시계열 모델의 모수를 추정하고, 추정된 모수를 $K^2$관리도로 관리한다. 제안된 방법은 기존 알고리즘과 비교하여 시계열 공정 변화 탐지에 우수한 성능을 보였으며 시계열 데이터에 있어서 보다 효율적인 공정관리 방향을 제시한다.

• 품질경영학회지
• /
• 제11권2호
• /
• pp.2-9
• /
• 1983

As will be seen, this paper is tries that the research on the mathematical structure of Markov process and Markovian sequential decision process (the policy improvement iteration method,) moreover, that it analyze the logic and the characteristic of behavior of mathematical model of Markov process. Therefore firstly, it classify, on research of mathematical structure of Markov process, the forward equation and backward equation of Chapman-kolmogorov equation and of kolmogorov differential equation, and then have survey on logic of equation systems or on the question of uniqueness and existence of solution of the equation. Secondly, it classify, at the Markovian sequential decision process, the case of discrete time parameter and the continuous time parameter, and then it explore the logic system of characteristic of the behavior, the value determination operation and the policy improvement routine.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.123-134
• /
• 1999

There are several models for process quality assurance by quality system (ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal or lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These paramaters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.247-257
• /
• 1999

There are several models for process quality assurance by quality system(ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal of lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These parameters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.150-150
• /
• 2003

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.49-55
• /
• 2008

Arc welding process is one of the most important technologies to join metal plates. Robotic welding offers the reduced manufacturing cost sought, but its widespread use demands a means of sensing and correcting for inaccuracies in the part, the fixturing and the robot. A number of problems that need to be addressed in robotic arc welding processes include sensing, joint tracking, and lack of adequate models for process parameter prediction and quality control. Problems with parameter settings and quality control occur frequently in the GMA(Gas Metal Arc) welding process due to the large number of interactive process parameters that must be set and accurately controlled. The objectives of this paper are to realize the mapping characteristics of bead width using a sensitivity analysis and develop the neural network and multiple regression method, and finally select the most accurate model in order to control the weld quality(bead width) for fillet welding. The experimental results show that the proposed neural network estimator can predict bead width with reasonable accuracy, and guarantee the uniform weld quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.87-90
• /
• 2005

The drawbead is used to control the material flow into the die and increase the forming quality during the binder wrap process and the stamping process in the sheet metal forming. Drawbead restraining force (DBRF) is controlled by geometrical parameters and influenced by process parameters such as friction coefficient and blank thickness. In order to inspect the effect of process parameters, parameter studies are performed with the variation of parameters using finite element model of drawbead which is utilized reliably for the calculation of the drawbead restraining force. Drawbead analysis is carried out with 2-D plane-strain element and 3-D shell element. After the verification of the accuracy of the drawbead model with 3-D shell element, it is utilized to the prediction and the investigation of the effect of process parameters. The result of parameter studies can be utilized to the die design in the tryout stage.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.54-59
• /
• 2003

The characteristics of the parameters for the probability distribution of fatigue crack growth life, using the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length equals the number of cycle curves that are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratios of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Wiubull,, showing a slight dependence on specimen thickness and stress intensity level. The shape parameter, $\alpha$, does not show the dependency of thickness and stress intensity level, but the scale parameter, $\beta$, and location parameter, ${\gamma}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.