• Clean Technology
• /
• v.22 no.2
• /
• pp.82-88
• /
• 2016

The loss of activity by coke is an important cause of catalyst deactivation during industrial operation. In this study, hydrogen ratio of reaction condition, which has influenced on coke formation over Pt-Sn catalyst, and regeneration of catalysts activity by coke burning, Pt sintering of coke burning as coke contents, effects of coke formation and deactivation with different Sn contents were confirmed. Pt-Sn-K catalyst supported on θ-alumina and γ-alumina was prepared progressively. Activity of regenerated catalyst for propane dehydrogenation was compared with fresh catalyst by coke burning, after propane dehydrogenation was carried out with different hydrogen ratio at 620 ℃ on fresh catalyst. Regenerated catalyst’s physical characterization such as BET, coke analysis and XRD was investigated. Through catalytic activity test and characterization, Sn contents of catalyst and hydrogen ratio in feed stream could affect coke formation on catalyst surface. Excessive coke makes loss of activity and Pt sintering during air regeneration process.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.215-234
• /
• 2012

Since ports play a role of gateway to the sea and hinterlands, it is essential to analyse the networks of shipping and inland when evaluating the function and development of a port. The container port of Gwangyang, starting to operate its facilities in 1998, has developed itself as a hub port. Using the data of shipping schedules of Korean ports and the measurement of centrality in sociology, this study analyses the process of world-wide shipping network expansion in Gwangyang and concludes some implications including earlier development of shipping networks due to incentives to shipping companies. Although Gwangyang port also has been expanding its inland network through developing trucking, railway transport, and coastal shipping, it has weakness in inland network as in the cases of interruption in 2004, resumption in 2009 and re-interruption in 2012 at coastal shipping. In 2000s the expansion of shipping and inland networks at the newly built container ports such as Pyungtaek, Ulsan, and Gunsan has enticed the competition among Korean ports at each hinterland. Nevertheless, the operation of Gwangyang container port is considered to affect indirectly the relocation of some manufacturers including Samsung Electronics. Studies on interrelation between development of container port and geographical demography of manufacturers are needed to assess the effects of container port on regional economy.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.83-94
• /
• 2016

Performance of absorbent for post-combustion $CO_2$ capture was measured and discussed. Fully saturated fresh absorbent (P2-15F) and absorbents sampled from absorption and regeneration reactor of continuous $CO_2$ capture process, P2-15A, P2-15R, respectively, were used as representative absorbents. Small scale fluidized bed reactor (0.05 m I.D., 0.8 m high) which can measure exhaust gas concentration and weight change simultaneously was used to analyze regeneration characteristics for those absorbents. Exhausted moles of $CO_2$ and $H_2O$ were measured with increasing temperature. $H_2O/CO$ ratio and working capacity were determined and discussed to confirm reason of reactivity decay after continuous operation. Moreover, possibility of side reaction was checked based on the $H_2O/CO_2$ mole ratio. Finally, suitable regeneration temperature range was confirmed based on the trend of working capacity with temperature.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.213-218
• /
• 2007

Domestic by opening of world construction market with recent FTA should be achieved systematic action that of exoteric surrounding construction environment to inculcate this because consciousness structure unpreparedness of legation fields about quality is expose for hindrance factor for QI in construction spot by quality and organization management official important thing for building company's QI because conquest is possible through QI of construction to possess government official and international competitiveness of customer satisfaction by offering consumer building of change and good quality rapidly, organization's CEO determination must become side improvement the formation government official enemy, and when inspect by each process, responsible persons participate cooperation enterprise space-time. To improve this because complete charge department for quality control appears that organization management need complete charge department being expose by greatly unprepared misgovernment in heavy hydrogen building company, expense that CEO under direct control histiocyte modeling air with AHP analysis is economical will be cost, but is construed can bring excellent effect in operation management side of quality and organization such as cost-cutting effect in maintenance side and I should do so that can occupy competitive power high position with tissue at active quality complete charge deputy.

• Archives of design research
• /
• v.17 no.4
• /
• pp.107-118
• /
• 2004

Nowadays Industrial Design appears to us as provided products in the market through only User Interface and Technical Improvement. Consumer purchasing products intend to grant the meaning for the product by mobilizing his specific feeling and experience the moment he contact products the first time. As metaphorical character shown in the product is named to the Product Language, Industrial designer shall constantly proceed the study on the exact understanding or processing method. As Objects or products using by us imply aesthetical value, it appears to be different according to the diverse condition of products be different according to the diverse condition of products to be used. In case objectivity is unsatisfactory, aesthetic character shown in the product requires new instrumental system. Product analysis applied aesthetical measure of BIRKHOFF can be applied as tool for inherent metaphorical character of product and product development. With this, Design operation shall be much easier. So Application of aesthetical measure is not only a system but a tool giving help to carry out more smooth design process.

• Journal of Information Technology and Architecture
• /
• v.9 no.4
• /
• pp.455-464
• /
• 2012

Due to the recent data explosion, methods which can meet the requirement of large data analysis has been studying. This paper proposes MRIterativeBUC algorithm which enables efficient computation of large data cube by distributed parallel processing with MapReduce framework. MRIterativeBUC algorithm is developed for efficient iterative operation of the BUC method with MapReduce, and overcomes the limitations about the storage size and processing ability caused by large data cube computation. It employs the idea from the iceberg cube which computes only the interesting aspect of analysts and the distributed parallel process of cube computation by partitioning and sorting. Thus, it reduces data emission so that it can reduce network overload, processing amount on each node, and eventually the cube computation cost. The bottom-up cube computation and iterative algorithm using MapReduce, proposed in this paper, can be expanded in various way, and will make full use of many applications.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.453-460
• /
• 2014

Fault injection attack is the process of attempting to acquire the information on-chip through inject artificially generated error code into the cryptographic algorithms operation (or perform) which is implemented in hardware or software. From the details above, the laser-assisted failure injection attacks have been proven particularly successful. In this paper, we propose an improved laser probing system for fault injection attack which is called the Dual-Laser FA tool set, a hybrid approach of the Flash-pumping laser and fiber laser. The main concept of the idea is to improve the laser probe through utilizing existing equipment. The proposed laser probe can be divided into two parts, which are Laser-I for laser cutting, and Laser-II for fault injection. We study the advantages of existing equipment, and consider the significant parameters such as energy, repetition rate, wavelength, etc. In this approach, it solves the high energy problem caused by flash-pumping laser in higher repetition frequency from the fiber laser.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.667-679
• /
• 2015

The bearer of the power sector's ETS compliance cost is power consumer for the following reasons. Firstly, power companies are constrained in establishing appropriate strategies to comply with ETS regulations due to the structural differences between the domestic power market and emission trading system. In other words, because power companies do not have a right to determine price and production of electricity, they have to compete with other companies under disadvantaged conditions in the emission trading market. Secondly, because ETS compliance cost is part of power production costs as it is also clearly written in the national greenhouse gas reduction road-map and the second energy supply plan, the cost should be included in power price following the power market operation rule. Thirdly, the most effective method to reduce carbon emissions in power sector is to reduce power demand, which is efficiently achieved through raising power price to a realistic level. Low power price in Korea is the major cause of rising power demand which is also the major cause of rising GHG emission. Therefore, power sector's ETS compliance cost should be included in power price to encourage power consumers' actions on reducing power consumption. Fourthly, when externality cost occurs in the process of delivering public services, usually beneficiary pay principle is applied to identify the cost bearer. Since electricity is one representative public good, the bearer of power sector's ETS compliance cost is power consumer.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.1
• /
• pp.117-125
• /
• 2012

This paper presented the design of SRPS, ground function test, and the deployment test on a high speed taxi of KC-100 airplane. KAI has developed a spin recovery system in collaboration with Airborne Systems for KC-100 general aviation airplane. Spin mode analysis, rotary balance and forced oscillation tests were performed to obtain the rotational, dynamic derivatives in the preliminary design phase. Prior to the detailed design process of SRPS, approximations for initial estimation of design parameters- fineness ratio, parachute porosity, parachute canopy filling time, and deployment method- were considered. They were done based on the analytical disciplines such as aerodynamics, structures, and stability & control. SRPS consists of parachute, tractor rocket assembly for deployment, attach release mechanism (ARM) and cockpit control system. Before the installation of SRPS in KC-100 airplane, all the control functions of this system were demonstrated by using SBTB(System Breakout Test Box) in the laboratory. SBTB was used to confirm if it can detect faults, and simulate the firing of pyrotechnic devices that control the deployment and jettison of SRPS. Once confirmed normal operation of SRPS, deployment and jettison of parachute on the high speed taxiing were performed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.1
• /
• pp.65-74
• /
• 2011

To establish governance, which is rising as the new urban management system, it is significant to prepare Good-Local governance model that is proper to regional conditions and characteristics. This study analyzes changes in influence of governance participants appeared during the process in ecological park in Chungju Won-heung, using new methodology comparing ideal form and real condition regarding the influence of decision making, which is the key factor of governance. The result of this study showed that influence in participation of governance decision making improved gradually and this developed as Good-Local governance decision making by developing consultation regarding the new regional issue when it comes to operation and management. For further study, general model needs to be established through applying and analyzing suggested analysis method to various governance cases to evaluate the level of influence, which is the key component.