• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2017

To launch the product recently attached to IoT consumer electronics, smart phones and healthcare products around the large companies is a trend that is growing interest in the IoT. However, the country's small business environment is what the environmental improvement process that is easily accessible to the small business environment because the IoT technologies are difficult to apply the IoT technologies than any other country environment than desperate situation. In this paper, we propose a service operating model to improve production efficiency when the fusion manufacturing process is currently operating in the country SMEs and IoT technology. Proposed model using the manufacturing product information and sensor / dabayiseu information in the entire manufacturing process has as its object to utilize the IoT technology. Performance evaluation, the proposed model is more efficient than the previous model and 23.1% of the manufacturing process. In addition, it is increasing the manufacturing process was reduced by 17.3%, the average processing time as compared to the previous model. Finally, the personnel cost to be used in the manufacturing process was found to be an average decrease of 19.8% than previous model.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.471-488
• /
• 2003

A web-based information system, that is a dominant type of information systems, suffers from the “web crisis” in development and maintenance of the system. To cope with the problem, a technology of reengineering to web-based business process, which is one of web engineering, is strongly needed. In this paper, we propose a BPN(Business Process Net) model and reengineering guides along with an application example, which are used for modeling web-based business processes and migrating to web-based information system. BPN model is a type of not only a Beta-distributed stochastics Petri net, but also an executable Activity diagram. BPN is modeled by using the Use Case analysis method and the Beta-distribution. The later is used for the purpose of modeling the uncertainty of execution time and cost of a business process. BPN model and reengineering heuristics might be used as a formal common model for business process specification languages, and analysis and design method for Web-based Information system, respectively.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.1-8
• /
• 2005

This paper formally defines a role-driven security and access control model of a business process in order eventually to provide a theoretical basis for realizing the secured business process management systems. That is, we propose a graphical representation and formal description of the mechanism that generates a set of role-driven security and access control models from a business process modeled by the information control net(ICN) modeling methodology that is a typical business process modeling approach for defining and specifying business processes. Based upon the mechanism, we are able to design and accomplish a secured business process management system that provides an unified resource access control mechanism of the business process management engine domain's and the application domain's. Finally, we strongly believe that the secured access control policies from the role-driven security and access control model can be easily transformed into the RBAC(Role-based Access Control) model that is a standardized security technology for computer and communications systems of commercial and civilian government organizations.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.32-35
• /
• 1998

Technology Acceptance Model (TAM) has been widely used for predicting behavioral processes in which information technologies were accepted, but several previous studies point out that TAM may not explain the adoption process of complex information technologies effectively. This study empirically tests the limitation of TAM, and suggests a proposed research model by incorporating the concept of the perceived behavioral control into TAM. Study findings indicate the proposed model can predict the adoption process better than TAM does.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.1137-1140
• /
• 2001

This thesis defines an end-to-end billing process model. The processes in the model can be mapped to the TMN(Telecommunications Management Network) model which is based on an international telecommunications management standard. We have identified two interfaces in this billing process model. Part 1 of this thesis provides a protocol-independent design of the UAI(Usage Accounting interface) between the service provider and the network provider. Part 2 of this thesis provides information modeling of the UMI(Usage Metering Interface) between the network provider and the equipment provider. This interface is applied to the B-ICI(Broadband ISDN Inter-Carrier Interface) environment.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.535-541
• /
• 2007

The Non-homogeneous Poisson process is probably the most popular model since it can model systems that are deteriorating or improving. The renewal process is a model that is often used to describe the random occurrence of events in time. But both these models are based on too restrictive assumptions on the effect of the repair action. The Modulated Power Law Process is a suitable model for describing the failure pattern of repairable systems when both renewal-type behavior and time trend are present. In this paper we propose maximum likelihood estimation of the next failure time after the system has experienced some failures, that is, Mean Time Between Failure for the MPLP model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.132-132
• /
• 2015

Virtual metrology (VM) model based on plasma information (PI) parameter for C4F8 plasma-assisted oxide etching processes is developed to predict and monitor the process results such as an etching rate with improved performance. To apply fault detection and classification (FDC) or advanced process control (APC) models on to the real mass production lines efficiently, high performance VM model is certainly required and principal component regression (PCR) is preferred technique for VM modeling despite this method requires many number of data set to obtain statistically guaranteed accuracy. In this study, as an effective method to include the 'good information' representing parameter into the VM model, PI parameters are introduced and applied for the etch rate prediction. By the adoption of PI parameters of b-, q-factors and surface passivation parameters as PCs into the PCR based VM model, information about the reactions in the plasma volume, surface, and sheath regions can be efficiently included into the VM model; thus, the performance of VM is secured even for insufficient data set provided cases. For mass production data of 350 wafers, developed PI based VM (PI-VM) model was satisfied required prediction accuracy of industry in C4F8 plasma-assisted oxide etching process.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.351-359
• /
• 2010

Recently, interesting of U-city with ubiquitous computing technologies has increased and u-city services can improve people's quality of life. Among the u-city services, traffice service is actively developed in our lives. In this paper, we propose the business model and business model process in u-intelligence traffic service. To propose the research purpose, we examined the prior business model and investigated u-intelligence traffic information and control services. And also, we draw scenario and used it to identify business model. To efficiently understand proposed business model, we built business model process of u-intelligence traffic information and control services. The results of study, we draw 4 representative U-intelligence traffic information and control service. Based on representative services, we proposed business model and business model process with stakeholder, benefiter and value model. This study concludes with implications of the study results as well as limitations and future research directions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.289-293
• /
• 1998

Two reasons for the low success rate of the practical implementation of BPR are the lack of good models and consideration of information system development stage in a BPR project. This paper suggests an Integrated Business Process Model (IBPM), which incorporates two distinct but interrelated points of view: form and business process. By integrating the form model with the business process model, the IBPM has advantages in performing BPR projects; it helps to build the model, to analyze and redesign business processes, and to do requirement analysis of information systems. This paper also suggests a new BPR supporting tool, BRAWII(Business Reengineering Assistance Workbench version 2.0). BRAWIIsupports IBPM and manages full stages of BPR project. In the design of BRAWII, the linkage between results of a BPR project and requirements for information system development is considered.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.437-448
• /
• 2007

This paper introduce information technology of software process assessment. It consists of eight parts such as concepts and introductory guide, a reference model for processes and process capability, performing an assessment, guide to performing assessments, an assessment model and indicator guidance, guide to competency of assessors, guide for use in process improvement, and guide for use in determining supplier process capability.