• 한국에너지공학회:학술대회논문집
• /
• 한국태양에너지학회, 한국에너지공학회 1993년도 춘계 공동학술발표회 초록집
• /
• pp.70-78
• /
• 1993

Heat pipes, applied to flat plate solar collectors, have a long and slender configuration with relatively low heat flux on the evaporator. Such a heat pipe has a tendency to build-up a liquid pool at the lower half of evaporator zone, and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding etc. In the present study, we tried to solve those problems by means of adjusting the two principle design parameters, liquid fill charge and wick length, using 4 heat pipes and 3 thermosyphons, with different values of parameter respectively. The corresponding results can be summarized as followings, - The thermal conductance of heat pipes was largely improved by el eliminating wick from adiabatic and condenser zone. - But on evaporator zone wick is inevitable to reduce behavior of the build -up of liquid pool , where arise diverse internal complex phenomena. - The liquid fill charge should have to be increased by 10∼20％ more than the quantity to saturate the wick.

• 열처리공학회지
• /
• 제33권5호
• /
• pp.232-238
• /
• 2020

Heating experiments using the 7075 aluminum alloy in the state of billet and extrudate have been performed to investigate the pertinent ranges of working temperatures and holding times for the application to the various automobile parts. The 7075 specimens from raw billet of 152 mm in diameter and 400 mm in length prior to extrusion were used for heating with a holding time of 10 minutes at temperatures between 380℃ and 550℃. Then, an extrusion process using the billet has been fulfilled at 380℃ with extrusion speed of 0.8 mm/min to get an plate-type extrudate of 75 mm in width and 4.2 mm in thickness. The samples from the extrudate were subjected to heating experiments at temperatures between 380℃ and 440℃ with holding times such as 10 min, 30 min, 60 min and 120 min at each heating temperature. The microstructures were investigated on the optical and EBSD micrographs. The hardness measurement and the tensile test have been performed to investigate the effect of the heat treatment on the mechanical property. The results showed for the 7075 extrusion process that the safe heating of billet can be performed below 450℃ and the extrusion can be done safely up to 400℃.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.170-178
• /
• 2019

최근 에너지 절감에 대한 관심도가 높아짐에 따라 에너지 소비가 높은 형광등과 백열등을 대체하는 친환경소재인 LED의 조명을 활용하는 움직임이 활발하다. 그러나, 고출력 LED의 경우 발열에 의한 열화현상 때문에 수명이 단축되는 현상이 발생하게 된다. 이에 대한, 해결방안으로 본 논문은 LED Packing중 방열판표면의 거칠기 처리를 통하여 열전달 계수를 증대시킴으로서 LED 수명연장 효과를 평가하였다. 거칠기 공정은 사포 및 샌드블라스트를 이용하여 진행하였다. 각 표면처리 공정에 따른 거칠기 및 표면적 변화를 정량적으로 평가하였으며, 열전달 계수를 측정하였다. 샌드블라스트, 사포를 이용하여 알루미늄 표면에 거칠기처리를 진행했을 경우 미 처리 시 보다 높은 대류 열전달 계수를 얻을 수 있었고, 샌드블라스트 처리 시 약 82.76%의 높은 방열 효율 향상을 얻을 수 있어, 이를 방열판에 적용할 시 큰 경제적 부담 없이 기존대비 더 높은 방열효율 증대를 통해 LED 수명을 대폭 연장 시킬 것으로 기대된다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1985년도 춘계학술대회
• /
• pp.9-12
• /
• 1985

This paper covers the design and implementation process of RF hypertermia system for cancer therapy. Among many hyperthermic methods, RF capacitive heating method is discussed because it can heat the deep-seated tumors selectively. The RF power oscillator and its applicators were designed and implemented. And the experiments were performed with agar phantom and dog to prove that the system can heat any depth selectively. And the electrical safety and appropriateness of clinical application was proved through the human living-body test.

• 신재생에너지
• /
• 제4권2호
• /
• pp.81-86
• /
• 2008

Rotary kiln in cement work has been evaluated for a wide variety of organic wastes such as wood, used tyres, plastic wastes and automobile shredder residue (ASR). However the presence of chlorine hampers the use of ASR as fuel in rotary kiln. Therefore, the behavior characteristics of chlorine components in rotary kiln should be considered to develop an effective method for ASR treatment to recovery energy resources. The aim of this paper is to present the chlorine control system applied to a cement manufacturing process for ASR use as an alternative fuel. In this work, the simulation of bypass unit and cyclones for chlorine control in rotary kiln has been studied and compared with the operation results of field test.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.50-55
• /
• 2013

On a plan for the Winter Olympics 2018, Korean government is in the process of the world's first use of ocean energy for the Olympic ice-rink. This technology will be applied to a seaside town and have possibility of an export industry. In this study, we researched facilities and system for P ice-rink that acts as a cultural center as well as a physical plant in Busan and provided the way that apply by seawater heat source. Also, existing system and seawater heat source system of P ice-rink was analyzed by the most commonly used life cycle cost analysis among economics methods. Such economics data for ice-rink using seawater will be utilized by a basic information.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1108-1111
• /
• 1999

결정성장 도중 전류에 의해 고/액 계면에서 발생하는 Peltier 열을 이용하면 온도구배의 증가와 이에 따른 성장속도의 증가 및 결정성의 향상에 기여할 것이라 예상되어, 고/액 계면에서 복합적으로 발생하는 Peltier 효과를 조사하였다. 전류 밀도, 극성 및 온도구배의 변화에 따른 고상과 액상 및 그 계면에서의 온도변화로부터 이론적 추론에 의해 Peltier 열, Thomson 열 및 Joule 열만의 영향으로 분류할 수 있었고, 고상/액상 계에 대한 Peltier 계수 및 Thomson 계수도 구할 수 있었다.

• 설비공학논문집
• /
• 제21권6호
• /
• pp.355-366
• /
• 2009

In the present study, fuel cell driven ground source heat pump system is applied to a large community building and performance of the heat pump system is computationally analyzed. Conduction heat transfer between brine pipe and ground is analyzed by TEACH code to predict the performance of heat pump system. Predicted COP of the heat pump system and the energy cost were compared with variation of the location of the objective building the water saturation rate of soil and the driven powers of heat pump system. Significant reduction of energy cost can be accomplished by employing the fuel cell driven heat pump system in comparison with the late-night electricity driven system. It is due to the low electricity production cost of fuel cell system and the application of recovered waste heat generated during electricity production process to the heating of large community building.

• 한국주조공학회지
• /
• 제32권6호
• /
• pp.276-283
• /
• 2012

This study presents the results on the changes of crucible thermal conductivity and inflow of Ar, and constructed the mathematical model about heat transfer into furnace. As process variables, simulation model was designated thermal conductivity of crucible to $0.5W{\cdot}m^{-1}{\cdot}K^{-1}$, $1W{\cdot}m^{-1}{\cdot}K^{-1}$, $2W{\cdot}m^{-1}{\cdot}K^{-1}$, $4W{\cdot}m^{-1}{\cdot}K^{-1}$, and inflow rate of Ar to 15 L/min, 30 L/min, 60 L/min. Initial condition and boundary condition were set respectively in two terms of process. Each initial conditions were set up by the preceding simulation of heat and fluid flow. The primary goal is the application of unidirectional growth of Si ingot using the result. In the result of the change of heat conductivity of crucible, the higher thermal conductivity of crucible shows the shorter solidification time and the bigger temperature difference. And the flow patterns are changed with the inflow rate of Ar. Finally, we found that the lower crucible's thermal conductivity, the better crucible is at polycrystalline Si ingot growth. But in case of Ar inflow, it is hard to say about good condition. This data will be evaluated as useful reference used in allied study or process variable control of production facilities.

• 한국수소및신에너지학회논문집
• /
• 제34권4호
• /
• pp.334-341
• /
• 2023

The purity of hydrogen finally purified in the hydrogen purification process system is greatly influenced by the uniformity of the purification temperature of the dry tower. A in-house code that can be easily used by field designers has been developed to predict the capacity of the appropriate heat source and the time to reach the temperature of the dry tower. A code was developed to predict unsteady heat transfer using Visual Basic for Applications. To verify the developed code, a grid independence test was performed, and finally, calculations were performed for two cases. In the first case, the time for the temperature of the heater jacket to reach 360℃ was about 1,400 seconds when the supply heat source was 1,000 W. And in the second case, the time for the temperature of the heater jacket to reach 360℃ was about 710 seconds when the supply heat source was 2,000 W. It was confirmed that the developed code well describes the actual test data of the regeneration process of adsorption and desorption, and it is judged that the code developed in the design process of various capacity systems will be effectively applied to the heat capacity calculation in the future.