• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.98-108
• /
• 2004

The concept of community capacity is regarded as the ability of people and communities to do works associated with the determinant factors and indicators of the circumstances of socio-economic, environmental and physical contexts. Building capacity of communities to effectively analyze our problematic issues and planning of community development is often required to scrutinize current status of community of socio-economic and infrastructural capacity development with GIS. We consider community development as a planned effort to build assets that increase the capacity of communities. Spatial asset mapping is the process enabling to identify and make inventories of tangible and intangible assets. This mapping requires developing a capacity inventory that collects individual organizational and community capacities in view of human, socio-cultural, natural, financial, digital, and physical capacity. The purpose of this research is not only designed to suggest a new concept capacity building, but also proposes a more creative framework of asset-based community cap linking to parcel-based spatial asset mapping and capacity mapping process.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.551-558
• /
• 2002

It was observed that adsorption characteristics of sulfonated fabric ion-exchanger for separating nickel ion from electroplating rinse water. Swelling ratio was increased by increasing degree of sulfonation and polarity of solvent. Ion-exchange capacity was also increased by increasing degree of sulfonation and showed 3.38 meq/g at 16% sulfonated ion-exchanger. There was little effects of pH. Adsorption equilibrium was attained within 10 min, and adsorption rate was 7.5 mg/min. Adsorption capacity was not changed after 7 cycles of regeneration process. Regeneration adsorption capacity was slightly decreased to 2.01 meq/g. It confirmed that durability of sulfonated fabric ion-exchanger was suitable for adsorption process. Adsorption equilibrium time was linearly increased by increasing L/D and adsorption capacity showed the ion exchange capacity within the range of 2.71 ∼ 3.01 meq/g in continuous process. Design of adsorption column could be possible for L/D<2. Under constant L/D condition, there is no little pH effect when rinse water is acidic solution, and operation condition of adsorption process was optimized under pH 5.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.273-278
• /
• 2007

The honeycomb adsorbents and adsorption process for carbon dioxide removal from fuel gas were investigated. Zeolite paper was made with Na-X zeolite powder and ceramic fiber as raw materials. $Li^+$, $Ca^{2+}$ or $K^+$ ion exchanges for Na-X zeolite and additional Na-X coating were performed on zeolite paper for increasing the carbon dioxide adsorption capacity, after that the adsorption characteristics of the samples were analyzed. Among the ion exchanged samples, $Li^+$ ion exchanged zeolite paper was most promising but its carbon dioxide adsorption capacity was less than expected for process application. However, additional Na-X coating was found to be an effective method for increasing the carbon dioxide adsorption capacity of the zeolite paper for process application. The carbon dioxide breakthrough test of the honeycomb adsorbent prepared with the zeolite paper was studied, and fuel gas treatment capacity was calculated when the honeycomb adsorbent was used in the rotary adsorption process.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.4
• /
• pp.153-165
• /
• 2014

We present a new framework for rental capacity management in which rental capacity is dynamically managed by means of temporary inventory addition/return. While serving customers with its own (native) capacity, the rental firm rents additional rental capacity from an upper echelon rental company so that it can avoid lost sales which may occur when stock is not sufficient, and returns it when stock becomes sufficiently large enough to cope with demands. Formulating the model as a Markov decision process, we investigate a flexible capacity addition/return policy that maximizes the firm's profit with respect to system costs. Numerical study indicates that rental operation with capacity addition/return can be economically favorable over rental operation without capacity expansion/return and can contribute the reduction in the size of native rental capacity.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.354-384
• /
• 2018

This paper aims at analyzing the effect of the relationship between innovation intermediaries and firms on firms' absorptive capacity from the perspectives of social capital. And it also analyzes how firms' innovation environment influences on their absorptive capacity in this process. For this purpose, we carry out an empirical analysis on 200 firms in the Daedeok Innopolis, which is the representative innovation cluster in Korea. According to this study, firm's absorptive capacity is positively affected by the reliability and frequency of firms' communication with innovation intermediaries. However, the geographic proximity does not have significant influence. Also, the innovation environmental factors play a positive moderating role in the absorptive capacity of firms, and the social factors have a distinct significant influence on it directly. Based on these findings, this paper would make a contribution to recognize the importance of innovation intermediaries in innovation process and their role as preceding factors to firms' absorptive capacity, as well as innovative environment in the innovation process.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.192-192
• /
• 2000

In this paper, a platoon merging is considered as a remote-controlled system with the state represented by a stochastic process. In this system, it becomes to encounter situations where a single decision maker controls a large number of subsystems, and observation and control signals are sent over a communication channel with finite capacity and significant transmission delays. Unlike classical estimation problem in which the observation is a continuous process corrupted by additive noise, there is a constraint that the observation must be coded and transmitted over a digital communication channel with finite capaci쇼. A recursive coder-estimator sequence is a state estimation scheme based on observations transmitted with finite communication capacity constraint. Using the coder-estimator sequence, the remote control station designs a feedback controller. In this paper, we introduce a stochastic model for the lead vehicle in a platoon of vehicles considering the angle between a road surface and a horizontal plane as a stochastic process. The simulation results show that the inter-vehicle distance and the deviation from the desired inter-vehicle distance are well regulated.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.74-79
• /
• 1995

In the last 10 years, membrane science and technology in Korea have grown fast in terms of basic research and process applications. Even the first large commercial membrane plant in Korea was an ion-exchange membrane process built in 1975 for the production of table salt with an annual capacity of 150,000 tons of salt, membrane processes could not draw general interests from industry not until 1987 when a reverse osmosis plant for the production of process water with a capacity of 10,000 m$^3$/day was built by Kugdong Petroleum Co. Today, the production of water by RO over the capacity of 140,000 m$^3$/day is in operation or under construction in Korea. Consumption of ultra pure water increases sharply in recent years mainly due to the rapid expansion of semiconductor industry and the introduction of ultra high pressure boilers for power plants.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.6
• /
• pp.1-6
• /
• 1982

The objective of this thesis to Provide a better insight into the effect of the amount of in-process storage has on the efficiency of production line with variable operation times. It is assumed that the material enters the line at the first work station and is then processed progressively through the line until it exits at the last work station, a finite amount of in-process storage is provided before all but the first work station of the line and the operation time of the work stations are statistically independent and follow exponential distribution. Under the above assumption, optimum allocation model is developed and following two approaches are used : 1) Given the available storage capacity, optimum allocation which minimizes the number of items in the line. 2) Given the available storage capacity, optimum allocation which. maximizes the utilization factor of the line. In a balanced three stage line, the production line efficiency is maximized under both categories when the second in-process storage is larger than the first.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3286-3301
• /
• 2014

Jung and Yoo proposed the first image interpolation-based reversible data hiding algorithm. Although their algorithm achieved superior interpolation results, the embedding capacity was insufficient. Lee and Huang proposed an improved algorithm to enhance the embedding capacity and the interpolation results. However, these algorithms present limitations to magnify the original image to any resolution and pixels in the boundary region of the magnified image are poorly manipulated. Furthermore, the capacity and the image quality can be improved further. This study modifies the pixel mapping scheme and adopts a bilinear interpolation to solve boundary artifacts. The modified reference pixel determination and an optimal pixel adjustment process can effectively enhance the embedding capacity and the image quality. The experimental results show our proposed algorithm achieves a higher embedding capacity under acceptable visual distortions, and can be applied to a magnified image at any resolution. Our proposed technique is feasible in reversible data hiding.