• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.403-406
• /
• 2005

In order to evaluate the Capability of ETM+ remotely- sensed data to provide 'Forest-shrub land-Rangeland' cover type map in areas near the timberline of northern forests of Iran, the data were analyzed in a portion of nearly 790 ha located in Neka-Zalemroud region. First, ortho-rectification process was used to correct the geometric errors of the image, yielding 0/68 and 0/69 pixels of RMS. error in X and Y axis, respectively. The original and panchromatic bands were fused using PANSHARP Statistical module. The ground truth map was made using 1 ha field plots in a systematic-random sampling grid, and vegetative form of trees, shrubs and rangelands was recorded as a criteria to name the plots. A set of channels including original bands, NDVI and IR/R indices and first components of PCI from visible and infrared bands, was used for classification procedure. Pair-wise divergence through CHNSEL command was used, In order to evaluate the separability of classes and selection of optimal channels. Classification was performed using ML classifier, on both original and fused data sets. Showing the best results of $67\%$ of overall accuracy, and 0/43 of Kappa coefficient in original data set. Due to the results represented above, it's concluded that ETM+ data has an intermediate capability to fulfill the spectral variations of three form- based classes over the study area.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.11
• /
• pp.625-631
• /
• 2003

The purpose of this paper is to assess experimentally system stability of the 154 ㎸ transmission system due to the current of the forthcoming AC High-Speed Railway (HSR) era. It introduces a simple method to evaluate the system stability The proposed method also shows the relationship between stability and power losses, and the stability indices made by the numerical process proposed in this paper will be used to assess whether a system can be stabilized or not. This paper also presents the improvement of the stability via loss reduction using STATCOM. Reactive power compensation is often the most effective way to improve both power transfer capability and system stability. The suitable modeling of the electric railway system should be applicable to the PSS/E. In the case study the proposed method is tested on a practical system of the Korea Electric Power Corporation (KEPCO) which will be expected to accommodate the heavy HSR load. Furthermore, it prove that the compensation of voltage drop and its by-product, loss reduction is closely related to improvement of system stability.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.308-314
• /
• 2013

Although global construction spending has experienced slow growth due to consecutive economic crises, global contractors have consistently attempted to expand their overseas market share, leading to more intense competition among contractors in the international construction market. In this market environment, owners, clients and financial institutions require reasonable and systematic criteria to effectively assess the business capabilities of international construction firms. However, the existing evaluation methods for construction firms rarely consider overseas-focused business capabilities. To address this problem, this study proposes a quantitative approach to assessing the overseas business capabilities of international construction firms. The limitations of existing approaches are reviewed, and the capabilities required to perform overseas businesses are analyzed through expert interviews. Finally, 18 evaluation indices are suggested in four categories: technology resources, project management, experience and performance, and sustainability. The relative weight of each index is determined according to the Analytical Hierarchy Process (AHP) method, and a preliminary investigation of 11 Korean construction firms is conducted. The proposed method is expected that it will provide the rational criteria for international owners, clients, and financial institutions for decision-making and for evaluating international contractors.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.672-680
• /
• 2011

The purpose of this study has been carried to develop a criterion for the selection of evaluation factors on Forest Carbon Cycle Community(F.C.C.C) based on the result of survey of 96 participants who were operation managers on mountain eco village(31), relevant experts(33), and officers of local government(32). For analysis of the results of survey, DHP(Delphi Hierarchy Process) method was used which is a combination of Delphi method and AHP(Analytic Hierarchy Process) method. The key factors on selection of a suitable area to launch F.C.C.C. project of Korea Forest Service was selected under three hierarchical classes. Class 1 comprises 3 indices(Physical resource index, Human resource index, Vision index), and Class 2 which contains 10 indices (Existing resource, Surroundings resource, Forest biomass resource, Humanities Social quality, Local resident participation, Leader's ability, External support, Planning of operation, Capability of operation, and Effect of operation). Class 3 is sub-level class of class which possess 38 indices. From the results of analysis, Consistency Index(C.I) of each index in the 3 classes was used as evaluation factor. In Class 1, index 'human resources' showed highest Consistency Index(0.454). In Class 2, index 'forest biomass resources' was the highest Consistency Index(0.376) in 'physical resources' of Class 1, index 'leader's ability' was the highest Consistency Index(0.326) in 'human resources' of Class 1, and index 'planning of operation' was the highest Consistency Index(0.346) in 'vision' of Class 1. In Class 3, relative importance of 38 index including 'Joint ownership land security(C.I.-0.266)' was evaluated. Based on the result of this study, a criterion for the selection of evaluation factors for F.C.C.C was developed and the evaluation criterion is expected to be use to select of a suitable area to launch F.C.C.C. project since 2011.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.83-89
• /
• 2002

The purpose of this paper is to assess experimentally system stability of the 154［㎸］transmission system due to the current of the forthcoming AC High-Speed Railway (HSR) era. It introduces a simple method to evaluate the system stability. The proposed method also shows the relationship between stability and power losses, and the stability indices made by the numerical process proposed in this paper will be used to assess whether a system can be stabilized or not. This paper also presents the improvement of the stability via loss reduction using a shunt compensator. Reactive power compensation is often the most effective way to improve both power transfer capability and system stability. The suitable modeling of the traction power system should be applicable to the PSS/E. The proposed method is tested on a practical system which will be expected to accommodate the heavy HSR load.

• Journal of Korean Society for Quality Management
• /
• v.49 no.2
• /
• pp.145-159
• /
• 2021

Purpose: A statistical similarity evaluation to compare pharmacokinetics(PK) profile data between nonclinical and clinical experiments has become a significant issue on many drug development processes. This study proposes a new similarity index by considering important parameters, such as the area under the curve(AUC) and the time-series profile of various PK data. Methods: In this study, a new profile similarity index(PSI) by using the concept of a process capability index(Cp) is proposed in order to investigate the most similar animal PK profile compared to the target(i.e., Human PK profile). The proposed PSI can be calculated geometric and arithmetic means of all short term similarity indices at all time points on time-series both animal and human PK data. Designed simulation approaches are demonstrated for a verification purpose. Results: Two different simulation studies are conducted by considering three variances(i.e., small, medium, and large variances) as well as three different characteristic types(smaller the better, larger the better, nominal the best). By using the proposed PSI, the most similar animal PK profile compare to the target human PK profile can be obtained in the simulation studies. In addition, a case study represents differentiated results compare to existing simple statistical analysis methods(i.e., root mean squared error and quality loss). Conclusion: The proposed PSI can effectively estimate the level of similarity between animal, human PK profiles. By using these PSI results, we can reduce the number of animal experiments because we only focus on the significant animal representing a high PSI value.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.86-106
• /
• 2002

Informatization is a process that corporation's external environmental factors and internal environmental factors influence as complex. is a phenomenon that appears via this process. To evaluate that informatization was propeled well or informatization level is high can be dangerous work extremely by only once-over-lightly some factors, organization information ability is superior or infrastructure is constructed well. Therefore, an evaluation for industrial information systems that consider corporation's external environment and internal environment configurationally and objective estimation through this is required in national dimension. This research sorted types of business using types of business classification of 2001 EIII(Evaluation Indices of Industrial Informatization) laying stress on corporation's product and product production process for reflecting various industrial classification. And we are dividing whole our country corporations by manufacture industry, the construction industry, distribution industry, service industry, banking industry 5 types of business. To see such classed types industry classification from consistent viewpoint, we saw them within new framework, purchase, operation, physical distribution, marketing and sale. service etc. laying stress on primary businesses except support businesses of planning, financial management etc. To draw special quality of business center from primary business of each types of business, we draw industry classification Key Capability that centers when plans corporation's corporate strategy and information strategy. And we deducted industrial classification key production business connected with industry classification Key Capability. After drawing an evaluation items for industrial information systems in informatization analysis viewpoint laying stress on drawn businesses. Finally we did Case Study by making out an evaluation for industrial information systems questionnaire that considers special quality of manufacturing industry. Through EIII that consider the industrial classification, we could know that it explains the corporation's purchase, production, distribution in general and detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.1001-1012
• /
• 2018

Regarding the small- and medium-sized enterprises in Korea that manufacture the railway vehicle parts, there are over 250 related companies. And they have been surviving in the form of producing and delivering the parts of the railway vehicles by importing the technologies and the products of the foreign countries rather than possessing their own technological abilities. Due to this, regarding the industry of the core components of the railroads, the dependence on the overseas has been high. As such, although, for supporting the small- and medium-sized enterprises that manufacture the railway vehicle parts, the government has been strengthening the diverse policy supports, it is a fact that the effectiveness of the support is not high. And, in order to effectively support these, there is a need to understand clearly and definitely what the important promotion factors are in the process of the technology commercialization. Accordingly, through the precedent researches regarding the factors that promote the technology commercializations of the small- and medium-sized enterprises that manufacture the railway vehicle parts, this research had extracted 10 main items. And the level of the importance of these indices was analyzed by using the AHP (Analytic Hierarchy Process). As a result of the AHP analysis, the factors within a corporation appeared to be the most important factor. And, as for the lower-ranking item, the commercialization capability was analyzed to be the most important item. It is highly expected that the contents and the results of this research will be usefully used when formulating the planning of the support program and the support policy for the technology commercializations by the public research organizations and the railroad management organization, which is an organization that supports the small- and medium-sized enterprises that manufacture the railway vehicle parts.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.