• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.984-990
• /
• 2013

Pick and placement systems need high speeds and reliability for the position alignment process of semiconductor packages in picking up and placing them on placement trays. Image processing is usually adopted for position aligning where finding out the most suitable method is considered most important aspect of the process. This paper proposes a method for judging the performance of different image processing algorithms based on the PCI (Process Capability Index). The PCI is an index which represents the error distribution acquired from many experimental data. The bigger the index, the more reliable the results or the lower the deviation. Two compared and candidate methods are Hough Transform and PCA (Principal Component Analysis), both of which are very suitable for oblong or rectangular type packages such as BGA's. Comparing the two approaches through a CPI with enough experimental results leads to the conclusion that the PCA is much better than the Hough Transform in not only reliability, but also processing speed.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.321-328
• /
• 2019

군 통신 쉘터는 내부에 통신 및 환경장비를 탑재하여, 네트워크 중심전에서 다양한 무기체계들의 통합적인 전투력 발휘를 위해 요구되는 정보의 송/수신 기능을 실시간 보장하고 전술환경의 생존성을 극대화시키는 장비이다. 쉘터 내부에 다양한 통신용 장비가 탑재되기 때문에 외부로부터의 전자기 공격에 대한 차페 성능을 반드시 보장해야한다. 본 연구에서는 데이터 마이닝 기법(서포트 벡터 머신)과 통계적 품질관리 기법(공정능력분석)을 이용하여 군 통신용 쉘터에서 차폐성능이 안정된 지점을 탐색하는 연구를 진행하였다. 안정된 지점의 탐색을 위하여 45대 쉘터의 EMI 차폐효과 측정데이터를 활용하였다. 먼저, 차폐효과가 안정되었다고 판단할 수 있는 기준을 세우고 서포트 벡터 머신으로 해당 기준에 부합하는 측정 포인트 집단과 그 외의 집단을 분리, 이 두 집단을 분류할 수 있는 분류 하이퍼플레인을 작성하였다. 그리고 공정능력분석을 이용하여 차폐효과 측정 데이터를 분석, 공정능력지수가 높은 측정 포인트와 서포트 벡터 머신의 하이퍼플레인으로 분류한 측정 포인트를 상호 비교함으로써 분류된 측정 포인트의 타당성과 차폐효과가 안정된 정도를 분석하였다. 분석 결과, 24개의 측정포인트에서 안정된 차폐 성능을 보유하고 있음을 확인하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.722-727
• /
• 2007

As the world construction market is rearranged by the level of technological capability, recently the technological capability in construction industry is developing rapidly. The important of measuring and analyzing technological capability in construction industry is gaining more and more emphasis. It enables to grasp the past and present situation of construction industry as well as to foresee changes in the future. However the concept of technological capability cannot be identified easily, as well as it is hard to compare that capability of construction industry among different countries. Although there have been numerous studies conducted on the technological capability of construction industry, most of the studies were in formsof surveys of specialists or industry professionals which lacked objectivity and sound basis for data. This study will be focused on investigating the methodology in exploiting and measuring surface of the earth and developing indicator and process to understand technological capability in construction industry through quantitative and statistical analysis. Then it will verify them through a case study.

• 대한원격탐사학회지
• /
• 제36권5_3호
• /
• pp.1067-1076
• /
• 2020

In this paper, an unsupervised saliency guided change detection method using UAV and aerial imagery is proposed. Regions that are more different from other areas are salient, which make them more distinct. The existence of the substantial difference between two images makes saliency proper for guiding the change detection process. Change Vector Analysis (CVA), which has the capability of extracting of overall magnitude and direction of change from multi-spectral and temporal remote sensing data, is used for generating an initial difference image. Combined with an unsupervised CVA and the saliency, Principal Component Analysis(PCA), which is possible to implemented as the guide for change detection method, is proposed for UAV and aerial images. By implementing the saliency generation on the difference map extracted via the CVA, potentially changed areas obtained, and by thresholding the saliency map, most of the interest areas correctly extracted. Finally, the PCA method is implemented to extract features, and K-means clustering is applied to detect changed and unchanged map on the extracted areas. This proposed method is applied to the image sets over the flooded and typhoon-damaged area and is resulted in 95 percent better than the PCA approach compared with manually extracted ground truth for all the data sets. Finally, we compared our approach with the PCA K-means method to show the effectiveness of the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.664-667
• /
• 1997

For higher component density per chip, it is necessary to identify and control the semiconductor manufacturing process more stringently. Recently, neural networks have been identified as one of the most promising techniques for modeling and control of complicated processes such as plasma etching process. Since wafer states after each run using identical recipe may differ from each other, conventional neural network models utilizing input factors only cannot represent the actual state of process and equipment. In this paper, in addition to the input factors of the recipe, real-time tool data are utilized for modeling of 64M DRAM s-poly plasma etching process to reflect the actual state of process and equipment. For real-time tool data, we collect optical emission spectroscopy (OES) data. Through principal component analysis (PCA), we extract principal components from entire OES data. And then these principal components are included to input parameters of neural network model. Finally neural network model is trained using feed forward error back propagation (FFEBP) algorithm. As a results, simulation results exhibit good wafer state prediction capability after plasma etching process.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.254-257
• /
• 2013

In-situ optical emission spectroscopy (OES) is employed for PECVD chamber monitoring. OES is used as an addon sensor to monitoring and cleaning end point detection (EPD). On monitoring plasma chemistry using OES, the process gas and by-product gas are simultaneously monitored. Principal component analysis (PCA) enhances the capability of end point detection using OES data. Through chamber cleaning monitoring using OES, cleaning time is reduced by 53%, in general. Therefore, the gas usage of fluorine is also reduced, so satisfying Green Fab challenge in semiconductor manufacturing.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1111-1116
• /
• 2009

본 논문에서는 집적 영상의 획득과 복원을 이용하여 왜곡에 강인한 물체를 인식하는 방법을 연구한다. 해당 화소들의 확률적 특성인 평균과 표준편차를 이용하여 3차원 공간에서 물체를 복원하고 거리를 추정한다. 표적인식은 Fisher 선형판별법(linear discriminant analysis, LDA)과 주성분 분석법(principal component analysis, PCA) 기술을 결합한 통계적 분류기(statistical classifier)로 수행한다. Fisher 선형판별법은 클래스 간의 판별력을 최대로 하고 주성분 분석법은 Fisher 선형판별법을 수행하기 위한 차원축소를 실행한다. 주성분 분석법은 차원축소 후 복원된 벡터와 원 벡터의 오차를 최소화하는 기술로 알려져 있다. 실험 및 시뮬레이션을 통하여 면외(out-of-plane) 회전된 표적을 본 논문에서 제안한 방법으로 분류한다.