• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.456-464
• /
• 2001

Deep drawing and ironing are tile major process today in manufacturing of aluminum alloy battery case used in cellular phone. Most of these process require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of these processes are relatively less known. Thus, it is expected that process analysis using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product. A commercially available finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.103-110
• /
• 2020

Riveting is mainly used to assemble the aircraft fuselage. An average of 2~3 workers is needed to assemble an aircraft fuselage consisting of various size frames by riveting. In this study, a riveting process that enables one-person operation using an automated C-frame riveting machine was proposed for improving the efficiency of productivity. The proposed process was verified stability through structural analysis. In the range that can maintain structural stability, panel thickness of the riveting machine and shape were modified to optimizing the shape for reducing the weight of the riveting process. The structural analysis was performed by software ANSYS workbench 19.2. The optimized riveting machine was reduced by 257kg compared to the existing model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.71-77
• /
• 2002

The Production of fine wire through wet wire drawing process with appropriate pass schedule would be impossible without understanding of relationship among many process parameters. Therefore, this paper investigates the relationship among process parameters of wet wire drawing process. In this study, it is possible to obtain the important basic data that can be used in the pass schedule of multi-pass wet wire drawing process. In order to verify the effectiveness of the analysis, pass redesign was performed based on the result of analysis to reduce the wire breakage. The wire breakage between the conventional pass schedule and the redesigned pass schedule was compared by the FE analysis and the wet win drawing experiment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.80-85
• /
• 2016

This study suggests a process design using cognitive processes. Job characteristic model for job design and recent cognitive engineering studies for process design are reviewed briefly. By using these concepts, the lean production system is re-interpreted in terms of cognitive engineering and the latent dimensions of the lean production system are revealed as the application of cognitive engineering principles. An integrated process design framework for cognitive manufacturing system using job characteristic model is suggested for the effective design of manufacturing system. Propositions for empirical analysis of this model are also analyzed through a questionnaire survey. Propositions are (1) experiential cognition and motivation potential affect the ability, role perception, and need for achievement of the operator in the manufacturing system, (2) the ability, role perception, and need for achievement of the operator affect the job performance. Both propositions are supported by correlation analysis and path analysis.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.350-355
• /
• 2008

Currently, in the automotive industry, the efforts to reduce the manufacturing cost by changing the manufacturing process are continually performed. In this paper, we proposed a new manufacturing process, the roll bending process of a ring plate of automotive fuel tank instead of conventional press blanking process to reduce material loss and manufacturing cost. Finite element analysis was used to optimize the roll bending process to assure rectangular cross-section of the ring plate. Also, spring-back analysis after the roll bending process was performed and dimension of the bending die considering spring-back was analyzed. Finally, we verified a possibility for realization of the proposed method with prototypes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.407-413
• /
• 2010

This paper reports on the research which analyzes acoustic signals acquired in progressive compressing, hole blanking, and burr compacting process. An acoustic sensor was set on the bed of hydraulic press. Acoustic signal is generated from progressive stamping process. First the signal acquired from the unit process; compressing, blanking or compacting, is studied by Fourier Transform and Short Time Fourier Transform. The blanking process emitted ultrasonic signal with more than 20kHz, but the compressing and compacting processes emitted acoustic signals with lower than 10kHz. The combined signals periodically acquired right after the tool grinding were then analyzed. 70-80kHz signals appeared in time-frequency domain, but not in the frequency domain, the magnitude of which was related to the tool wear. Short Time Fourier Transform made up for the Fourier Transform in analyzing the emitted signal for stamping process in the ultrasonic domain.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.171-177
• /
• 2016

The goals of enterprises are to use resources efficiently, minimize the costs or reduce unsuitable products with efficient process or production environment and take competitive advantages through efforts such as proper supply of good products, etc. so as to satisfy diversified customers and survive in rough competition. To reduce production costs, it's inevitable to make unsuitable products during the production in manufacturing process. Therefore, this researcher grasped LED assembly process and drew the results of productivity improvement through process analysis so as to improve productivity by process anlaysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.82-91
• /
• 1995

The purpose of this research is to develop a new real-time process control system. In this paper, a theoretical method for acquiring the control limit of cutting process(cutting surface) according to the required value(geometric tolerance) based on geometrical relations was propsed. In particular, the three following points are amphasized. Firstly, the process control was based on the cutting process, and the control limit was determined from the analysis of geometrical relations. Secondly, AMGD(Actual Measured Geometrical Deviation) was used as a new substitute value in process analysis. Thirdly, fuzzy reasoning was introduced to get the control limit flexibility according to the variations in the required value and general consideration of each measurememnt items.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.101-112
• /
• 1988

This article is the consumer protection policy-making process analysis through consumer protection law case study. Interest group theory has application to this analysis. Discussion is then focused on input and oupput of each interest group's demands through the enactment process of consumer protection law.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.806-811
• /
• 2007

In this study, we propose a more systematic design process for the structure-borne noise. The proposed way consists of 4 steps: Problem definition, Cause analysis, Development of counter-measure and Validation. Especially, we improved the second step: Cause analysis. According to the PCA(Panel Contribution Analysis), a reduction in vibration of the panels of which panel contribution is positive and larger, results in a reduction in structure-borne noise. We have, however, met the case in which the concept of PCA is no valid in a few vehicle tests. In order to understand this phenomenon, we compared the major panels selected by PCA with the one chosen by DSA(Design Sensitivity Analysis). After investigating the difference between the two results, a more improved process is suggested. The proposed one for the second step in the design process consists of not only the previous way: PCA with deformation analysis results but also DSA. It is finally validated that the proposed design process decreases the sound pressure of the concerned noise transfer function more than 3.5 dB.