• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.235-242
• /
• 2010

DSTC(Defense Systems Test Center) in ADD(Agency for Defense Development) performs a test for various kinds of weapon system. In order to provide accurate test measurement data relating to the weapon system's performance with customer, A reliable test process and an objective analysis of the measurement data are required. DSTC is trying to apply CMMI(Capability Maturity Model Integration) Ver 1.2 in a test process. In this paper, we present the result of CMMI Engineering Process Area Modelling of Test Process.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.19-27
• /
• 2003

Any ERP system pushes a company toward full process integration and solves the fragmentation of information. However, the tight process integration can propagate and magnify mistakes made in one department into the other departments in real time. Thus, it can be posited that a central support system for the coordination can help ERP users and administrators dig out problems, take care of tedious validation and verification, and maintain process integration of ERP with great consistency. This paper ,proposes an agent-based ERP operations support system (EOSS) that aims at achieving and maintaining process integration of ERP at the highest level possible. With EOSS, the process integrity is monitored, with anomalies prevented as early as possible and repaired as precisely as possible.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.68-74
• /
• 2017

Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. Up to now there have been a lot of researches on thermal NIL, but most of them have been focused on polymer deformation in the molding process and there are very few studies on the cooling and demolding process. In this paper a cooling process of the polymer resist in thermal NIL is analyzed with finite element method. The modeling of cooling process for mold, polymer resist and substrate is developed. And the cooling process is numerically investigated with the effects of imprinting temperature and residual layer thickness of polymer resist on stress distribution of the polymer resist. The results show that the lower imprinting temperature, the higher the maximum von Mises stress and that the thicker the residual layer, the greater maximum von Mises stress.

• 한국보육지원학회지
• /
• 제11권5호
• /
• pp.91-111
• /
• 2015

본 연구에서는 유아가 오감을 이용한 벼 관찰활동을 통해 유아의 과학과정기술이 어떻게 변화하는지 살펴보고자 실시되었다. 연구참여자는 경기도 오산시에 소재한 Y어린이집에 재원중인 만3세 유아 10명이었다. 유아의 과학과정기술의 변화를 살펴보기 위하여 Spradley(1980)의 참여관찰 분석과정을 최정열(2000)이 수정 보완한 분석과정을 사용하였다. 분석자료에는 유아 인터뷰 자료, 유아관찰일지, 교사 관찰기록 등이 사용되었다. 연구결과 오감을 이용한 벼 관찰활동은 유아의 과학과정기술에 긍정적인 효과가 있는 것으로 나타났다. 유아는 초기에 비해 후기로 갈수록 벼에 대해 예측하기, 관찰하기, 분류하기, 비교하기, 측정하기 능력이 향상되었다. 본 연구결과는 유아의 과학적 사고 신장을 위한 교수방법의 기초자료로 활용될 수 있을 것이다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2011

세계 각국은 지식재산권이 확보된 자국의 기술을 국제표준으로 제정하여 산업보호 및 해외시장 창출을 추구하고 있음에 따라, 우리나라도 국가 정책적 차원에서 효과적인 표준화전략을 수립하기 위해서 시장 및 이용자가 요구하는 기술 분야의 표준화 과제를 선정하고 우선순위를 정하여 선택과 집중전략을 운영하는 것이 필요하다. 표준화 분야의 우선순위를 결정하는 것은 학계, 연구계, 산업계, 정부 등의 이해관계가 존재하는 의사결정문제로 복수의 평가기준을 갖는 다기준 의사결정문제로 정의할 수 있다. 본 연구에서는 다기준 의사결정문제에 체계적인 이론과 절차를 제공하는 계층분석방법(AHP)을 이용하여 국내 민간 표준화기구인 한국정보통신기술협회에서 선정한 37개 표준화 분야에 대한 우선순위를 결정하였다.

• 자원리싸이클링
• /
• 제21권1호
• /
• pp.3-16
• /
• 2012

도시광산 재자원화기술의 모듈과 한국의 비철제련 프로세스를 파악하기 위하여 재자원화기술의 전체상과 요소기술, 물리선별, 비철제련 프로세스 및 바람직한 도시광산 처리기술의 단위조작을 밝히고, LS-Nikko동제련(주)과 고려아연(주)의 리싸이클링 프로세스를 탐색하였다. 끝으로 일본의 대표적인 비철제련소인 DOWA Holdings 및 JX Holdings 리싸이클링 프로세스와 한국의 위 두 비철제련소의 리싸이클링 프로세스를 비교검토 하였다.

• 한국폐기물자원순환학회지
• /
• 제34권2호
• /
• pp.140-147
• /
• 2017

This study was conducted to evaluate the effects of physical characteristics. Twelve specific odorous compounds and various sources of bacteria were tested via treatment of food waste using an ultra-thermophilic aerobic composting process. Food waste was mixed with seed material and operated for 47 days. During composting, the temperature was maintained at $80-90^{\circ}C$. The variations in $O_2$, $CO_2$ and $NH_3$ production suggested typical microorganism-driven organic decomposition patterns. After composting, the concentrations of 12 specific odorous compounds other than ammonia did not exceed the allowable exhaust limits for odor. After composting, thermophiles represented 50% of all bacteria. After composting, the percentage of thermophile bacterial increased by 15%. Therefore, both stable composting operation and economic benefit can be expected when an ultra-thermophilic composting process is applied to food waste.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.90-95
• /
• 2019

This study aims to gain the design data through the process design of the organic Rankine cycle, which can produce 250kW of electric power through waste heat recovery. In this study, a simulation was conducted using APSEN HYSYS to make the model for the process design of the 250kW-class waste heat recovery system. For the thermodynamic model, the test was conducted with hot water as the heat source, the water steam as the cooling water for the cooler, and the refrigerant R245FA in the cycle. In the final design, it was expected and found from the simulation that the cycle efficiency was 12.62% and that 250kW of power was produced considering the margin of 80%.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.102-108
• /
• 2020

The demand for lightweight materials and high-strength steel has rapidly increased to help reduce the weight of a vehicle body; it improves the fuel efficiency of automobiles and provides passenger safety. Additionally, as the material becomes thinner, the demand for its resistance against corrosion becomes higher. Hence, the application of the surface-treated steel sheet has surged rapidly. In this study, a weld bonding experiment using a delta spot welding machine is performed on a thin sheet of a different material (Al6061-T6/GA440). The thickness of the material was kept at 1 mm to reduce the weight of the automobile body parts. Additionally, the purpose of this study is to control the heat input by applying the welding conditions of a multi-stage pressure pattern to improve corrosion resistance shear strength. The analysis of nugget diameter measurement, shear tensile test, and salt spray test was performed to achieve the aim.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.40-45
• /
• 2011

Using the spark plasma sintering process (SPS process), the WC-6wt.%Co hard materials were densified using an ultra fine WC-Co powder. The WC-Co was almost completely dense with a relative density of up to 100% after the simultaneous application of a pressure of 60 MPa and the DC pulse current for 3 min without any significant change in the grain size. The average grain size of WC that was produced through this experiment was about $0.2{\sim}0.8{\mu}m$. The hardness and fracture toughness were about $1816kg/mm^2$ and $15.1MPa{\cdot}m^{1/2}$, respectively, for 60 MPa at $1200^{\circ}C$.