• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3239-3242
• /
• 2013

An improved rapid method for determination of the fatty acid composition using modified methylation procedure was compared with the AOAC reference procedure based on the methylation of fatty acid with the addition of BF3 catalyst before and while heating. The new method is useful for research and routine quality control and has a number of advantages over the reference procedure which are more rapid, simple and also reliable. Applicability of the modified methylation method was confirmed with three vegetable oil samples (palm oil, coconut oil and olive oil). Based on the validation method results, we obtained that a quite linear calibration curve of fatty acids was performed with $R^2$ in range of 0.9972-0.9994. The sensitivity of gas chromatography instrument was able to analyze the fatty acids up to a few ppm, the precision and accuracy were good enough with the %RSD between 1.5%-19.5% and the recovery of linolenic acid was 99.1% in the range of 80.0%-113.3%.

• Computers and Concrete
• /
• 제5권2호
• /
• pp.101-116
• /
• 2008

The microscopic determination of air void characteristics in hardened concrete, defined in EN 480-11 as the linear-traverse method, is an extremely time-consuming and tedious task. Over past decades, several researchers have proposed relatively expensive mechanical automated systems which could replace the human operator in this procedure. Recently, the appearance of new high-resolution flatbed scanners has made it possible for the procedure to be automated in a fully-computerized and thus cost-effective way. The results of our work indicate the high sensitivity of such image analysis automated systems firstly to the quality of sample surface preparation, secondly to the selection of the air void threshold value, and finally to the selection of the probe system. However, it can be concluded that in case of careful validation and the use of the approach which is proposed in the paper, such automated systems can give very good estimate of the air void system parameters, defined in EN 480-11. The amount of time saved by using such a procedure is immense, and there is also the possibility of using alternative stereological methods to assess other, perhaps also important, characteristics of air void system in hardened concrete.

• Journal of Information Technology Applications and Management
• /
• 제9권4호
• /
• pp.13-34
• /
• 2002

This paper considers a postal transportation planning problem in the transportation network of the form of hub and spoke Given mail sorting centers and an exchange center, available vehicles and amount of mails to be transported between mail sorting centers, postal transportation planning is to make a transportation plan without violating various restrictions. The objective is to minimize the total transportation cost. To solve the problem, a tabu search algorithm is proposed. The algorithm is composed of a route construction procedure and a route improvement procedure to improve a solution obtained by the route construction procedure using a tabu search. The tabu search uses the best-admissible strategy, BA, and the first-best-admissible strategy, FBA. The algorithm was tested on problems consisting of 11, 16 and 21 mail sorting centers including one exchange center. Solutions of the problems consisting of 11 mail sorting centers including one exchange center were compared with optimal solutions On average, solutions using BA strategy were within 0.287% of the optimum and solutions using FBA strategy were within 0.508% of the optimum. Computational results show that the proposed algorithm can solve practically sized problems within a reasonable time and the quality of the solution is very good.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.41-50
• /
• 1994

프로펠러 주위의 비압축성 점성유동을 해석하기 위해 멀티그리드 방법을 이용한 Iterative time marching 방법이 적용되었다. 이 방법은 3차원 비압축성 Navier-Stokes 방정식을 움직이는 비직교 일반 좌표계상에서 풀고 있으며, 시간에 대해서는 1차의 정확도 그리고 공간에 대해서는 2차 또는 3차의 정확도를 가지고 있으며 반복계산의 수렴속도를 가속시키기 위해서 멀티그리드방법을 사용하였다. 또한 본 방법은 Vector나 Parallel컴퓨터에 적용이 매우 간편하다는 장점을 가지고 있다. 본 연구 결과와 실험치 혹은 다른 연구자의 계산 결과와 일반적으로 잘 일치하고 있으며, 멀티그리드 방법은 수렴에 필요한 CPU시간을 단축시키고 해의 정확도도 개선함을 보여주었다.

• 산업경영시스템학회지
• /
• 제42권2호
• /
• pp.78-85
• /
• 2019

High variance observed in the measurement system can cause high process variation that can affect process capability badly. Therefore, measurement system analysis is closely related to process capability analysis. Generally, the evaluation for measurement system and process variance is performed separately in the industry. That is, the measurement system analysis is implemented before process monitoring, process capability and process performance analysis even though these analyses are closely related. This paper presents the effective concurrent evaluation procedure for measurement system analysis and process capability analysis using the table that contains Process Performance (Pp), Gage Repeatability & Reproducibility (%R&R) and Number of Distinct Categories (NDC). Furthermore, the long-term process capability index (Pp), which takes into account both gage variance and process variance, is used instead of the short-term process capability (Cp) considering only process variance. The long-term capability index can reflect well the relationship between the measurement system and process capability. The quality measurement and improvement guidelines by region scale are also described in detail. In conclusion, this research proposes the procedure that can execute the measurement system analysis and process capability analysis at the same time. The proposed procedure can contribute to reduction of the measurement staff's effort and to improvement of accurate evaluation.

• 상하수도학회지
• /
• 제12권3호
• /
• pp.118-124
• /
• 1998

To use chlorine residual as an surrogate parameter of the water quality change during the transportation in the water distribution system(WDS), the correct prediction model of chlorine residual must be established in advance. This paper shows the procedure and the result of applying the water quality model to the field WDS. To begin with, hydraulic model was calibrated and verified using fluoride as an tracer. And chlorine residual was predicted through simulation of water quality model. This predicted value was compared with the observed value. With adjusting the bulk decay coefficient(kb) and the wall decay coefficient(kw) according to the pipewall environment, the predicted chlorine residual can represent the observed value relatively well.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.63.2-63.2
• /
• 2010

Solar radiation data are used in several forms and for a variety of purposes. The most detailed information we have is beam and diffuse solar radiation on a horizontal surface, by hours, which is useful in simulations of solar processes. Daily data are more often available and monthly total solar radiation on horizontal surface can be used in some process design methods. However, as performance is generally not linear with solar radiation, the use of average may lead to serious errors if non-linearities ara not taken into account. It is also possible to reduce radiation data to more manageable forms by statistical methods. The control of the quality of most measurements is relegated to the control of the measuring instruments and measuring processes themselves. An accurate measurement will usually result from the use of a high-quality instrument that has been accurately calibrated and is properly used by a qualified individual.

• 산업공학
• /
• 제15권2호
• /
• pp.209-217
• /
• 2002

Quality of Service(QoS) in the telecommunications can be evaluated by analyzing the opinion data which result from the surveyed opinions of respondents and quantify subjective satisfaction on the QoS from the customers' viewpoints. For analyzing the opinion data, MOS(mean opinion score) method and Cumulative Probability Curve method are often used. The methods are based on the scoring method, and therefore, have the intrinsic deficiency due to the assignment of arbitrary scores. In this paper, we propose an analysis method of the opinion data using logit models which can be used to analyze the ordinal categorical data without assigning arbitrary scores to customers' opinion, and develop an analysis procedure considering the usage of procedures provided by SAS(Statistical Analysis System) statistical package. By the proposed method, we can estimate the relationship between customer satisfaction and network performance parameters, and provide guidelines for network planning. In addition, the proposed method is compared with Cumulative Probability Curve method with respect to prediction errors.

• 품질경영학회지
• /
• 제31권1호
• /
• pp.90-108
• /
• 2003

This study deals with a case analysis on the implementation of ISO 9000/14000 Integrated Management System. The intention is to provide some general guidelines, in particular, to small-to-medium-sized companies that are planning to introduce the Integrated Management System. First we briefly review each of the ISO 9000 series, ISO 14000 series and Integrated Management System. We then investigate the case of a small-sized company that have built and is successfully operating the Integrated Management System. We start with introducing the company, and then examine the background and the procedure for implementing the Integrated Management System. We investigate effects of the Integrated Management System, which are the main focus of this paper. This study is meaningful in that, to our best knowledge, it is the first field report appearing in the literature in regard to the actual implementation of ISO 9000/14000 Integrated Management System in Korea.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.68-79
• /
• 1992

The economic order quantity(EOQ) is a robust quantity, and it is largely insensitive to reasonable errors in the estimation of most of its parameters. Optimal EOQ and reorder point which are not sensitive to the estimates of the various cost model parameters for Kim and Park's model are determined. This of Taguchi's parameter design which finds a robust EOQ and reorder point using reasonable cost structure on the assumption of normally distributed quality characteristic. A numerical example is also presented to illustrate the proposed procedure and computer aided numerical experiments for selected values of backordered fractions and standard deviations are performed.