• Journal of Construction Engineering and Project Management
• /
• v.6 no.1
• /
• pp.11-19
• /
• 2016

Most of the Indian contractors are not well equipped to handle the growing demand of infrastructure development; hence construction projects frequently run in to time and cost overruns, disputes and quality issues. This study aims to improve the construction industry in India by implementing lean principles to eliminate non-value adding activities (wastes). The purpose of this study is to 1) identify the wastes and their sources affecting the construction process, and 2) to identify problems and document lessons by applying a Last Planner System (LPS) to a sample project. First, the researchers identified that Delays, Rework, and Interruptions were the most critical wastes affecting the construction process and Poor management control, Poor Planning and Shortage of Resources were the major sources of the above mentioned wastes. Second, the researchers report the Percent of Planned Complete (PPC) analysis results and experienced problems after implementation of LPS at the sample project. It was observed that much more improvement could have been achieved if there was consensus between the owners and the contractor on the implementation of the LPS in its entirety. Some of the problems experienced in the implementation of the LPS like lack of scheduling, resource and material shortage were found to be similar to those in developed countries.

• Journal of Engineering Education Research
• /
• v.19 no.2
• /
• pp.26-33
• /
• 2016

A camp program where the theory of inventive problem solving TRIZ is applied to real problems of the industry was developed and taught at a five-day seminar apart from the standard curriculum at a university D in Gyeonggido. This study focuses on the educational effect that the TRIZ method has on the engineering students when their creative problem solving skills are required to solve industry problems on their own with the knowledge from their courses. For five days, the students were educated about TRIZ and assigned a real industry problem "Removal of friction caused by bubble formation in water heating pipelines". By applying TRIZ to the problem, the students developed an "Air removing Air Arrester" which received the evaluation, "with understanding the system architecture and the task objective causes and formation of the problem could be handled which directly helps the company's R&D". In this case, TRIZ offers the students a guideline and knowledge on how to approach problems and as a result the students provided a practical solution. During the process, the TRIZ method instilled confidence in the students and proved to be a motivation. It becomes obvious that this short-term program has a positive effect on students' way of thinking creatively and increasing their problem-solving abilities.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.17-26
• /
• 2009

This paper is about that case study of the Tube Transportation System that the new transportation system offering passenger and logistic service in a metropolis having plenty of the floating population or between medium-sized cities, and solving large issues like terrible traffic jams and environmental problems etc. in this region. Also it presented that elicitation results of performance parameter and the categorization system of it applying a systematic analysis methodology. By the medium of this paper, It showed that definition, case study, performance parameters, and the categorization system of parameters of a general tube transportation system before developing requirements of a specific tube transportation system. From now on, it will come in pretty handy in systems engineering of activities to establish a concept of a new tube transportation systems and develop requirements.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.291-299
• /
• 2016

To enhance network efficiency, named-data networking (NDN) implements data caching functionality on intermediate network nodes, and then the nodes directly respond to request messages for cached data. Through the processing of request messages in intermediate node, NDN can efficiently reduce the amount of network traffic, also solve network congestion problems near data sources. Also, NDN provides a data authenticate mechanism so as to prevent various Internet accidents caused from the absence of an authentication mechanism. Hence, through applying NDN to various smart IT convergence services, it is expected to efficiently control the explosive growth of network traffic as well as to provide more secure services. Basically, it is important factors of NDN which data is cached and where nodes caching data is located in a network topology. This paper first analyzes previous works caching content based on the popularity of the content. Then ii investigates the hitting rate of caches in each node of a network topology, and then propose an improved caching scheme based on the result of the analyzation. Finally, it evaluates the performance of the proposal.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1912-1921
• /
• 2003

This paper presents a global mode modeling of space structures and a control scheme from the practical point of view. Since the size of the satellite has become bigger and the accuracy of attitude control more strictly required, it is necessary to consider the structural flexibility of the spacecraft. Although it is well known that the finite element (FE) model can accurately model the flexibility of the satellite, there are associated problems : FE model has the system matrix with high order and does not provide any physical insights, and is available only after all structural features have been decided. Therefore, it is almost impossible to design attitude and orbit controller using FE model unless the structural features are in place. In order to deal with this problem, the control design scheme with the global mode (GM) model is suggested. This paper describes a flexible structure modeling and three-axis controller design process and demonstrates the adequate performance of the design with respect to the maneuverability by applying it to a large flexible spacecraft model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.194-198
• /
• 2015

In this paper, a remote emergency stop system to improve the safety of an automated driving vehicle is proposed. One of the most serious problems of the previous wireless remote emergency system is that it does not work when the wireless channel is damaged in case of an emergency because it is composed of a single communication channel. Therefore, the proposed remote emergency stop system composed of a portable wireless remote system and a stationary wireless remote system is designed and the remote emergency stop system for automated driving vehicles is developed. By applying it to an automated driving vehicle to check it's performance, the wireless remote system is tested. Emergency stops using the portable wireless remote system is tested when the stationary wireless remote system is disconnected. Also, emergency stops using the stationary wireless remote system are tested when the portable wireless remote system is disconnected. The results of the emergency stop test show a satisfactory performance.

• Journal of Information Technology Services
• /
• v.9 no.4
• /
• pp.169-185
• /
• 2010

According to software growth, also software maintenance has been continuously improving. In addition, the existing concept of software maintenance process demands operational management and improvement of service task. However, when we perform maintenance task, we have several constraints about applying service based requirement to system. Therefore, in order to solve these problems, we need a study of task of process for service based maintenance. In this paper, we propose a Service based Software Maintenance Process. Proposed process based on MaRMI-RE standard for software development and maintenance and compares it with the service based representative standards. In a related works, we study activity of ITIL and identify activities and tasks for maintenance. After this, identified activities and tasks compare with activities of MaRMI-RE. And then, we derive activities and tasks of a Service based Software Maintenance Process. Finally, we validate a result by comparing the proposed process with a general service operational process.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.9-15
• /
• 2018

The main goal of extended data expression is to develop a data structure suitable for common problems in ubiquitous environments. The greatest feature of this method is that the attribute values can be represented with probability. The next feature is that each event in the training data has a weight value that represents its importance. After this data structure has been developed, an algorithm has been devised that can learn it. In the meantime, this algorithm has been applied to various problems in various fields to obtain good results. This paper first introduces the extended data expression technique, UChoo, and rule refinement method, which are the theoretical basis. Next, this paper introduces some examples of application areas such as rule refinement, missing data processing, BEWS problem, and ensemble system.

• The Mathematical Education
• /
• v.43 no.4
• /
• pp.419-440
• /
• 2004

The purpose of this paper is to know the effects on number and operation abilities of the 1st grade children of elementary school by applying teaching and learning activity throught communication. For this purpose, we have studied according to the following procedure. 1. We divised teaching and learning model through communication and applied in the actual teaching and learning activity. 2. We investigated the effects of number and operations abilities of the 1st grade children by applying teaching and learning activity through communication. To accomplish this purpose, we applied learning activity through communication to the 1st grade of 40 elementary school children for about six months(September 1, 1999 ～ February 20, 2000). In process of applying this model, we collected all sorts of cases in the children's learning activity and investigated children's response on learning activity through communication, interview with children and researcher's observation. We applied the model through communication in class and compared with the traditional learning. 1. In learning through communication, children could solve the problem in themselves with a sense of responsibility. 2. It was impossible to find out the degree of children's comprehension in the explanatory learning. But in the learning through communication, it was a great help to individualize and plan the learning because children express their ideas clearly. It has conclusion as follows. The learning activity through communication has effected on forming number and operations abilities of the 1st grade of elementary school children importantly. 1. Children have improved in the abilities through communication to express their own ideas. 2. Children have studied with a sense of responsibility not in the teacher-oriented learning but in the self-directed learning 3. Children could find out the mathematical concepts in themselves - correcting false concepts, reguiding concepts by errors, finding invisible errors, solving problems variously and knowing the easy method. 4. The activity through communication in mathematics was a base of children's individual learning and important data of next learning plan. 5. The mathematical concepts formed through communication had a high transfer of learning. 6. Children have taken pleasure of discovery and had affirmative attitude about mathematics learning. We can make sure that number and operations abilities of the 1st grade children are formed by applying teaching and learning activity through communication. However, help and control of teacher have to be with it.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.321-324
• /
• 2006

The latest concrete has showed that the deterioration of durability has been increased by the damage from salt, carbonation, freezing & thawing and the others. Therefore, it is needed to protect durability and performance according to the appropriate materials and methods in the concrete structures. In general, several types of polymer and silicate are used as protecting deterioration agents of concrete structures, but these agents have many problems because of low durability and properties. In this study, It developed the deterioration restraining agent using polycondensed silicate and monomer that can block a deterioration cause such as CO2 gas, salt and water from the outside and enhance waterproofing ability by reinforcing the concrete surface when applying it to concrete structures. Also, it evaluated improving concrete performance using a deterioration restraining agent.