• 설비공학논문집
• /
• 제11권6호
• /
• pp.871-879
• /
• 1999

Present study explains some experimental results on the aerodynamic noise of the cross-flow fan usually installed in the indoor unit of the room air-conditioners and provides a simple reduction method of radiating sound to decrease the total noise level. The spectrums of the noise of the cross-flow fan were analyzed by the spectral decomposition method to characterize the generated sound. The unsteady fluctuating flow field was also measured using the I-type hot-wire probe. Comparing the spectral characteristics of the sound and the flow velocity, a useful noise reduction method was proposed which bounds the region with a fence where the flow fluctuations were noticeably changed in the same fashion as the source spectral distribution functions vary. To validate the proposed method for reducing noise generated by the cross-flow fan, the sound pressure levels of the cross-flow fan system were compared of the experimental rig with and without the bounding fence for various flow rates.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1436-1440
• /
• 2007

Beryllium copper has been known to be an important material for the various fields of industry because it can be used for mechanical and electrical/electronic components that are subjected to elevated temperatures (up to $400^{\circ}C$ for short times). Blade type tip for probing the cells of liquid crystal display(LCD) was fabricated using beryllium copper foil. The dry film resist was employed as a mask for patterning of the blade type tip. The beryllium copper foil was etched using hydrochloric acidic iron-chloride solution. The concentration, temperature, and composition ratio of hydrochloric acidic iron-chloride solution affect the etching characteristics of beryllium copper foil. Nickel with the thickness of $3{\mu}m$ was electroplated on the patterned copper beryllium foil for enhancing its hardness, followed by electroplating gold for increasing its electrical conductivity. Finally, the dry film resist on the bridge was removed and half of the nickel was etched to complete the blade type tip.

• Bulletin of the Korean Chemical Society
• /
• 제11권5호
• /
• pp.460-463
• /
• 1990

The normal and fluorinated high-Tc superconducting materials, $YBa_2Cu_3O_{7-x}F_y$with $0.25{\leq}x{\leq}0.55\;and\;0.00{\leq}y{\leq}0.30$, were synthesized to investigate the dopping effect of fluorine atom on the superconductivity of Y123 and studied by X-ray diffraction analysis and electron probe microanalysis, resistivity and thermopower measurements, and polarized micro-Raman spectroscopy. The reproducible micro-Raman spectra were recorded and analyzed. The coherent assignments could be suggested for the spectra of normal and fluorinated samples. The fluorine atoms introduced were found to be substituted for oxygen in pyramidal Cu-O units rather than in Cu-O chains. The unit cell parameters were decreased upon the substitution of oxygen by fluorine atom. From the decreasing cell parameters and Tc, the increasing thermopower, and the possible assignments of the vibrational modes, it could be suggested that the dopping of fluorine atom localizes the superconducting electrons in Y123.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.154-158
• /
• 1984

In order to characterize the permeability of small unilamellar vesicles (SUV), efflux of 6-carboxyfluorescein (6-CF) from the vesicles was monitored spectrophotofluorometrically. Since the entrapped highly quenched 6-CF (200 mM) became fluorescent upon release from the vesicles, the 6-CF could be used as an efflux probe. SUV containing entrapped 6-CF was prepared from egg phosphatidylcholine and separated by gel filtration on Sepharose 4B. Observed change of relative fluorescent intensity with time was sigmoidal. From this curve, the parameter of permeability was determined either by half-time or a released amount per unit time from the initial slope. Half-time of efflux of prepared SUV having 302 ng phospholipid/ml in 10 mM Tris-HCl buffer pH 7.4 was 21.0 min at $37{\circ}C$. Various factors which could affect the half-time were examined including temperature, pH, salt, and vesicle concentration. In particular the effect of vesicle concentration on the efflux revealed that the permeability can be a function of the concentration.

• 천문학회보
• /
• 제45권1호
• /
• pp.61.3-61.3
• /
• 2020

We present spatially resolved outflows and photoionization for a pilot sample of 11 type 1 AGNs (z<0.3) based on the Gemini Multi-Object Spectrograph Integral Field Unit data. These AGNs were selected since we found strong outflow signatures in SDSS spectra. We focus on [OIII] and Hα emission lines to probe outflow kinematics by measuring line flux, velocity, and velocity dispersion at each pixel. We investigate characteristics of gas kinematics of type 1 AGNs and compare them with those of type 2 AGNs in our previous studies. Furthermore, by drawing BPT map, photoionization states will be also discussed. Based on the results, we discuss various implications on the impacts of outflows on star formation in host galaxies.

• 한국재료학회지
• /
• 제17권2호
• /
• pp.73-80
• /
• 2007

For the sub-65 nm CMOS process, it is necessary to develop a new silicide material and an accompanying process that allows the silicide to maintain a low sheet resistance and to have an enhanced thermal stability, thus providing for a wider process window. In this study, we have evaluated the property and unit process compatibility of newly proposed composite silicides. We fabricated composite silicide layers on single crystal silicon from $10nm-Ni_{1-x}Co_x/single-crystalline-Si(100),\;10nm-Ni_{1-x}Co_x/poly-crystalline-\;Si(100)$ wafers (x=0.2, 0.5, and 0.8) with the purpose of mimicking the silicides on source and drain actives and gates. Both the film structures were prepared by thermal evaporation and silicidized by rapid thermal annealing (RTA) from $700^{\circ}C\;to\;1100^{\circ}C$ for 40 seconds. The sheet resistance, cross-sectional microstructure, surface composition, were investigated using a four-point probe, a field emission scanning probe microscope, a field ion beam, an X-ray diffractometer, and an Auger electron depth profi1ing spectroscopy, respectively. Finally, our newly proposed composite silicides had a stable resistance up to $1100^{\circ}C$ and maintained it below $20{\Omega}/Sg$., while the conventional NiSi was limited to $700^{\circ}C$. All our results imply that the composite silicide made from NiCo alloy films may be a possible candidate for 65 nm-CMOS devices.

• Journal of Nutrition and Health
• /
• 제35권10호
• /
• pp.1053-1059
• /
• 2002

In post-genome period, the technique for identifying gene expression has been changed to high throughput screening. In the field of molecular nutrition, the need for this technique to clarify molecular function of the specific nutrient is essential. In this study, we have tested the zinc-regulated gene expression in zinc-deficient U937 cells, using cDNA microarray which is the cutting-edge technique to screen large numbers of gene expression simultaneously. The study result can be used for the preliminary gene screening data for clarifying, using monocyte U937 cell line, molecular Zn aspect in atherosclerosis. U937 cells were cultured in Zn-adequate (control, 12 $\mu$M Zn) or Zn-deficient (experimental, 0 $\mu$M Zn) ESMI media during 2 days, respectively. Cells were harvested and RNA was extracted. Total RNA was reverse-transcriptinized and synthesized cDNA probe labeled with Cy-3. fluorescent labeled cDNA probe was applied to microarray slide for hybridization slide, and after then, the slide was scanned using fluorescence scanner. ‘Highly expressed genes’ in Zn-deficient U937 cells, comparing to Zn-adequate group, are mainly about the genes for motility protein, immune system protein, oncogene and tumor suppressor and ‘Less highly expressed genes’ are about the genes for transcription, apoptosis associated protein, cell cycle, and several basic transcription factors. The results of this preliminary study imply the effectiveness of cDNA microarray for expression profiling of a singly nutrient deficiency, specially Zn. Furthur study, using tailored-cDNA array and capillary endothelial cell lines, would be beneficial to clarify molecular Zn function, more in detail.

• 대한화상학회지
• /
• 제24권2호
• /
• pp.43-45
• /
• 2021

Magnetic Resonance Image (MRI) has been used as a safe, conventional and harmless diagnostic tool. However, thermal injuries have frequently been reported during MRI scanning due to the heat generated by the reaction with the magnetic field. It is recommended that metal-containing monitoring devices such as pulse oximetry and ECG monitoring leads should be removed prior to the start of the MRI scan, but these monitoring devices are inevitably placed in children or patients in the intensive care unit who have low compliance with the scan. Since the interaction between the metal probe or wire loop of pulse oximetry and the magnetic field can result in high thermal conduction, full-thickness burn can occur over the entire body surface during the MRI examination. Several cases of thermal burns from pulse oximetry on the fingers have been reported. However, we present a case of a full-thickness burn arising left earlobe in a 2-month-old child caused by the high conduction heat from pulse oximetry metal probe.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.2019-2025
• /
• 2016

Hepatocellular carcinoma (HCC) is major health problem with high mortality rates, especially in patients with hepatitis B virus (HBV) infection. Telomerase function is one of common mechanisms affecting genome stability and cancer development. Recent studies demonstrated that genetic polymorphisms of telomerase associated genes such as telomerase associated protein 1 (TEP1) rs1713449 and PIN2/TERF1-interacting telomerase inhibitor 1 (PINX1) rs1469557 may be associated with risk of HCC and other cancers. In this study, 325 patients with HCC and 539 non-HCC groups [193 healthy controls, 80 patients with HBV-related liver cirrhosis (LC) and 266 patients with HBV-related chronic hepatitis (CH)] were enrolled to explore genetic polymorphisms of both SNPs using the allelic discrimination method based on MGB probe TaqMan real time PCR. We demonstrated that all genotypes of both genes were in Hardy-Wienberg equilibrium (P>0.05). Moreover, there was no significant association between rs1713449 genotypes and HCC risk, HCC progression and overall survival (P>0.05). Interestingly, we observed positive association of rs1469557 with risk of HCC when compared with the LC group under dominant (CC versus CT+TT, OR=1.89, 95% CI= 1.06-3.40, P=0.031) and allelic (C versus T alleles, OR=1.75, 95% CI=1.04-2.94, P=0.033) models, respectively. Moreover, overall survival of HCC patients with CC genotype of rs1469557 was significantly higher than non-CC genotype (Log-rank P=0.015). These findings suggest that PINX1 rs1469557 but not TEP1 rs1469557 might play a role in HCC progression in Thai patients with LC and be used as the prognosis marker to predict overall survival in HCC patients.

• 벤처창업연구
• /
• 제2권1호
• /
• pp.153-169
• /
• 2007

열작용에 의한 전자파의 안전성을 생각하는데 있어서는 , 이 30${\sim}$300MHz 부근의 주파수대가 가장 중요하고 기립 신장 방향의 공진 상태에서는 목, 슬 관절, 발목 등 가는 부분이 강하게 가열되는 위험이 있다. 이처럼 자기자극기는 시간적으로 변화하는 자계를 인체내부에 전계를 유도하여 무접촉성, 무침습적으로 깊고, 넓은 부위의 자극이 가능한 이점으로 말초신경, 뇌질환, 뇌신경, 근력, 요실금, 노인성, 근질환, 재활치료 등까지 근래에 와서 활발하게 연구가 활발히 진행 중이다. 마지막으로 초미니 자기신경 치료기를 말초신경계 질환치료에 적용하기 위하여 연구한 결과, 첫째로 자기루프 객체의 실린더 형태로 설계하고 동작전원과 제어장치를 구현하였고, 둘째로 루프 객체 실린더형이 프로브의 특성과 치료영역 범위와 치료펄스의 거리에 대한 유효영역을 구하였고, 셋째로 프로브의 형태에 따른 펄스포밍과 에너지 값을 구현하여, 병변에 따른 치료펄스를 구현할 수가 있었다. 특히, 특성실험을 통해 댐핑펄스 형태와 치료펄스 형태 등을 다양하게 구하게 되었다. 최근에 의학 발달로 무자극, 무침습에 따른 질환치료에 조금이라도 도움이 되고자 구현 하였다. 본 연구에서는 고진폭 치료펄스(전통적인 magneto-therapy)의 크게 대단한 강렬)는 짧은 시간에 치료효과를 극대화 하고, 미래에는 수요가 크게 확대 될 것으로 예측된다.