• 한국연소학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2001

Usually, we use the flame thickness and turbulence scale to classify the flame structure on a phase diagram of turbulent combustion. The flame structure in turbulence is still in debate, and many studies have been done. Since the flame motion is rapid and its reaction zone thickness is very thin, it is difficult to estimate the flame thickness. Here, we propose a new approach to determine the reaction zone thickness based on ion current signals obtained by an electrostatic probe, which has enough time and space resolution to detect flame fluctuation. Since the signal depends on the flow condition and flame curvature, it may be difficult to analyze directly these signals and examine the flame characteristics. However, ion concentration is high only in the region where hydrocarbon-oxygen reactions occur, and we can specify the reaction zone. Based on the reaction zone existing, we estimate the reaction zone thickness. We obtain the thickness of flames both in the cyclone-jet combustor and on a Bunsen burner, compared with theoretically predicted value, the Zeldovich thickness. Results show that the experimentally obtained thickness is almost the same as the Zeldovich thickness. It is concluded that this approach can be used to obtain the local flame structure for modeling turbulent combustion.

• 전자공학회논문지SC
• /
• 제48권3호
• /
• pp.53-59
• /
• 2011

본 논문에서는 DNA 올리고뉴클리오타이드(oligonucleotide)를 통한 전하 이동을 기반으로 하는 분자성 전자광학 스위칭 소자를 제시한다. DNA 올리고머(oligomer)가 흡착되어 있는 금전극에 전자들이 주입되어 전극으로부터 DNA 올리고머로 전하가 흘러가게 하고 이 전하의 이동도를 광학적 스위칭으로 확인할 수 있도록 제안되었다. DNA 올리고머의 흡착량이 증가함에 따라 DNA를 통한 전하의 이동성과 전극 표면에서의 전하전달 제한성으로 인해 전리전류는 감소하였다. DNA의 끝단에 합성된 Cy3 형광 분자의 점멸도를 전극 기반의 전하 주입법을 이용하여 확인하였다. 이러한 결과들은 DNA 올리고머를 이용한 새로운 분자성 전자광학 스위칭 소자에 이용될 수 있다.

• 천문학회보
• /
• 제42권2호
• /
• pp.73.4-74
• /
• 2017

We report preliminary results from our radio study of X-ray selected complete AGN sample in the Local Universe (z < 0.05), using the KVN/KaVA. The main goal is to probe the parsec-scale radio properties of the X-ray selected AGNs, which has not been done systematically before. The BASS (Burst Alert Telescope AGN spectroscopic survey) sample from the Swift-BAT hard X-ray all-sky survey is the least biased AGN sample against dense gas/torus obscurations compared to optically selected AGNs, providing ideal targets to study the general properties of local AGNs in radio wavelengths. Combining our radio data with BASS X-ray/optical measurements, we will probe the relations of radio powers with the fundamental quantities of black holes such as bolometric luminosity, black hole mass, and Eddington ratio. Using these relations, we will discuss our current understandings of how accretions and jets of local AGNs are linked together, and what they imply for the nature of our AGN sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.435-437
• /
• 1995

It is important to understand tile behaviours of tile high pressure DC glow discharge with a micro gap inside a pixel of the plasmas display panel. We prepared a narrow gap discharge system and have measured electron temperature and density by means of double probe methods in high pressure which was between 100torr and 200torr. And the electrode gap was 7mm. When the pressure varied from 100torr to 200torr, the negative glow was created at a distance less than 1mm from the cathode. And the length of the faraday dark space decreased from 8mm to 5mm. Hence probe measurements was mainly, performed in the region of the Faraday dark space. The dependence of electron temperature and density on the pressure and current density was same with that of the general flow discharge, i.e. as the pressure increased the electron temperature decreased and the density increased. But the spatial electron density distribution in the Faraday dark space was highly distorted because of the effect of high pressure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.219.1-219.1
• /
• 2014

전자소자 산업의 미세화 및 대형화에 따라 플라즈마 밀도, 전위, 온도, 균일도 등 과 같은 플라즈마 특성을 제어하는 것은 차세대 플라즈마 장치 개발에 있어 매우 중요한 요소라고 할 수 있다. 특히, 급격한 소자의 미세화에 따라 플라즈마 공정을 통해 발생할 수 있는 damage는 큰 issue가 되어 왔고, 많은 연구자들은 이를 해결하기 위해서 다각적인 노력을 진행해 왔다. 그중 높은 전자 온도는 높은 전자 에너지에 의해 공정 중 소자를 손상 시키는 주된 원인이라고 보고되고 있으며, 이에 대한 제어기술은 매우 중요하다고 할 수 있다. 본 연구에서는 서로 다른 두 개의 내/외측으로 나뉘어진 나선형 모양의 ICP 안테나를 이용 하여 연구를 진행하였다. 내측의 안테나에는 2 MHz를 연결 하였으며, 외측의 안테나에는 13.56 MHz를 연결 하였으며, 내/외측 안테나에 각각 pulse mode로 입력전력을 인가해 줌으로써 플라즈마의 특성을 관찰하였다. Pulse / CW (Continuous Wave) mode에 있어서 전자온도의 측정을 위해 emissive probe 를 이용하여 plasma potential과 floating potential을 측정하였으며, 이를 통하여 전자온도를 계산하여 구할 수 있었다. Duty ratio 및 pulsing frequency의 변화에 따른 전자온도의 변화를 확인 할 수 있었으며, 그에 따른 플라즈마 균일도를 ion saturation current를 측정함으로써 관찰할 수 있었다. 실제 식각 공정에 있어서 Pulsing 조건에 따른 식각 특성을 관찰하기 위해, SiO2, ACL (Amorphous Carbon Layer)에 대해 식각을 진행하였으며, 식각 메커니즘 분석을 위해 이온에너지 분포의 변화를 PSM (Plasma Sampling Mass-spectroscopy)을 이용하여 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.560-570
• /
• 2005

In this paper, a microelectrode away DNA chip was fabricated on glass slide using photolithography technology. Several probe DNAs consisting of mercaptohexyl moiety at their 5' end were immobilized on the gold electrodes by DNA arrayer utilizing the affinity between gold and sulfu. Then target DNAs were hybridized and reacted with Hoechst 33258, which is a DNA minor groove binder and electrochemically active dye. Cyclic voltammetry in 5mA ferricyanide/ferrocyanide solution at 100 mV/s confirmed the immobilization of probe DNA on the gold electrodes. Linear sweep voltammetry or cyclic voltammetry showed a difference between target DNA and control DNA in the anodic peak current values. It was derived from Hoechst 33258 concentrated at the electrode surface through association with formed hybrid. It suggested that this DNA chip could recognize the sequence specific genes. It suggested that multichannel electrochemical DNA microarray is useful to develop a portable device for clinical gene diagnostic system.

• 한국경영과학회지
• /
• 제27권2호
• /
• pp.153-171
• /
• 2002

In this paper, we present an efficient pricing strategy, the pivot and probe Algorithm for Network Flow Problems(PAPANET), specifically for solving capacitated, linear network flow problem (NPs). The PAPANET begins with an initial relaxed network problem(RNP), consisting of all the nodes and initial candidate arcs(possibly a few least cost arcs form the original problem and a set of all the artificial and slack arcs). After an initial solution to the RNP is derived by pivoting, the PROBE procedure identifies a set of most violated arcs from the noncandidate arcs that are not considered to be in the current RNP, and adds them to the RNP. The procedure also discards a set of least favorable, zero flow, nonbasic arcs from the RNP. The new RNP is solved to optimality and the procedure continues until all of the dual constraints of the noncandidate arcs are satisfied by the dual solution to the RNP. The PAPANET effectively reduces the problem size, time per pivot, and solution CPU time by eliminating noncandidate arcs. Computational tests on randomly generated problems indicate that PAPANET achieves and average savings of 50-80% of the solution CPU time of that of a comparable standard network simplex implementation.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.34-39
• /
• 2008

Steam Generator(SG) tubes are classified as one of the key components in nuclear power plants, and they should be periodically examined by the intensified management program for the assurance and diagnosis of their structural integrity. In this study, we use the optimum analysis technique to draw the detection and categorization of bowing(BOW) signals; abnormal tube-to-tube proximity in the SG upper bundle free span area. The locations in which BOW signals are detected likely have latent degradation of ODSCC(Outer Diameter Stress Corrosion Cracking). For the sake of timely and correct detection of BOW signals and diagnosis of ODSCC, we carried out the experimental demonstrations using a reduced mock-up. And we validated the MRPC(Motorized Rotating Pancake Coil) analysis technique is better than the bobbin. Hence, it comes to conclusion that the optimum analysis technique can be a good alternative for the reliable SG tube examination.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.47-51
• /
• 2002

ECT(eddy currentign testing) is very effective technique to detect a flaw within a conductor. Co-based amorphous wire was used as a sensor head. The wire has almost 0 magneto-striction and high permeability. An uniform magnetic field was applied to 1mm thick copper plate and $25{\mu}m$ thick aluminum sheet conductor using spiral typed coil The size of the coil has $40mm{\times}40mm$ outer width and $8mm{\times}8mm$ inner width. The copper plate and aluminum sheet has 0.5mm and 0.1mm wide gap, respectively. The frequency range of applied field was 100kHz-600kHz. The induced voltage difference of 2.5mV was obtained in the maximum voltage and minimum one measured across the gap of the 1mm thick conductor. In the case of aluminum sheet, 0.4mV was obtained. From this results, the effectiveness of Co-based amorphous wire was confirmed in the ECT technique.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권5_6호
• /
• pp.257-267
• /
• 2004

일반적 모델 기반의 분산 교착상태 문제를 해결하기 위한 대부분의 알고리즘들은 diffusing computation이라는 기법을 이용하였는데 이 기법의 주된 특징은 PROBE를 전파하고 그에 따른 응답 메시지에 교착상태 발견에 필요한 정보를 전달하는 것이다. 신속한 교착상태의 발견은 매우 중요하기 때문에 본 연구에서는 응답 메시지 대신 PROBE 상에 교착상태 발견을 위한 정보를 전달하게 한다. 이는 응답 메시지의 역전송 과정을 불필요하게 하기 때문에 기존 알고리즘에 비해 시간을 거의 두 배로 단축시키는 결과를 가져온다. 또한, 기존 알고리즘은 단지 알고리즘이 한번만 실행되는 경우를 고려하였으나 본 연구에서 제시한 알고리즘은 동시 수행하는 경우를 효율적으로 처리하여, 교착상태를 발견하는 시간을 더욱 단축시킬 수 있다. 제안된 알고리즘의 성능은 시뮬레이션을 통하여 타 알고리즘들과 비교하였다.