• Textile Coloration and Finishing
• /
• v.5 no.3
• /
• pp.206-215
• /
• 1993

In the prior study, wool gabardines were treated with alkaline proteases which were some kinds of enzyme to decompose protein, and their tensile strengths were determined, and the surface of the fibers were also observed using a scanning electron microscope. Enzylon ASN 30 and Alkalase 2.5L DX did not show much effect on the weight loss of wool, however, the weight loss of wool increased considerably with treating Esperase 8.0L. Pretreatment of wool with dichloloisocyanuric acid before protease-treatment increased the weight loss of wool to a great extent. In this study, the enzyme treated wools dyeing behaviors with acid dye, Milling Cyanine 5R, were mainly investigated. The protease-treatment remarkably increased not only the rate of dyeing but also the saturation dye uptake. From these results, it seemed likely that the structural relaxation of adhesive filler of interscale or intercellular cement facilitated the dye penetration into the fibers, at the same time, the change in the inner structure of the wool fibers by the protease made the fixation of the dyes more efficient.

• Journal of Korean Physical Therapy Science
• /
• v.6 no.4
• /
• pp.173-178
• /
• 1999

The purpose of this study was to determine the effect of High Voltage Pulsed Current on pH in the healing wound bed. Seven adults, four males and three females, were studied with a total of fifty-five viable treatment sessions. Using a Cardy Digital pH meter, we measured the pH in the wound bed following saline rinse both prior to treatment and after a forty-five minute treatment. Analysis of all viable records(n=54) did not show a significant change in pH(p=0.82). The mean pH change in NoN-Smokers(-0.14) was more acidic when compared to the mean pH change in smokers(0.27) which was more alkaline.

• Journal of Magnetics
• /
• v.4 no.2
• /
• pp.55-59
• /
• 1999

In an attempt to find an effective production way of the$ Sm_2Fe_{17}N_{x-}type material, the Sm_2Fe_{17-}$type alloy with chemical composition of Sm 22.7 wt.%, Fe72.3 wt.% Nb 5.0wt.% was subjected to a HD (hydrogen decrepitation) treatment prior to a nitrogenation, and its effect on the formation of the nitride material was investigated. The nitrogenation behaviours of the alloy were investigated using a TPA(thermopiezic analysis), TMA, and DTA under nitrogen gas, and XRD. It has been found that the previous HD treatment significantly facilitated the formation of $Sm_2Fe_{17}N_{x-}$type nitride, and this was accounted for by the clean surface and the finer particle size of the powder caused by the HD treatment. It has also been found that the hydrogen atoms existing in the initial HD-treated alloy were removed almost completely during the nitrogenation. The heat output associated with the nitrogenation of the previously HD-treated alloy was found to be significantly smaller than that of the as-cast alloy.

• English Language & Literature Teaching
• /
• v.16 no.3
• /
• pp.1-18
• /
• 2010

This study examined the effects of previewing and providing background knowledge on low level EFL readers' comprehension of expository texts and their responses to these treatments. 130 college freshmen were randomly placed into one of three treatment groups and read two expository texts reflecting unfamiliar cultural information. Prior to reading, one group was given previewing instruction, which included vocabulary preteaching and summaries, and a second group was provided with culture-specific background knowledge through watching videos and slides. The third group read each text without any prereading instruction. Immediately after reading a passage, subjects answered a 10-item multiple-choice test. Results showed significant positive effects of the previewing treatment and weak positive effects of the providing background knowledge treatment. Students' responses on the questionnaires revealed that the majority felt that the experimental treatments contributed to comprehension enhancement, made reading more enjoyable, and expedited their reading process. Students in the control group, however, indicated that they needed explicit prereading instruction in order to understand the texts. Pedagogical implications of the findings for EFL reading instruction are provided.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.313-316
• /
• 2005

In the present study, Bauschinger effect was investigated for the micro-alloying forging steel which has been developed for about 30 years ago to save energy consumption by eliminating the heat treatment processes in the forging industry. The micro-alloying steels used fur cold forging industry mainly aim to replace the usual carbon steel. With the conventional carbon steels, all the deformation history can be eliminated after the final heat treatment(quenching and tempering). In the case of micro-alloying forging steels, however, the prior deformation history should be taken into consideration to meet the mechanical property requirement since the microstructure of micro-alloying steels might exhibit the Bauschinger effect, which was not needed to consider in the case of conventional carbon steel having quenching and tempering treatment. In the present study, the reverse loading tests were carried out to determine the Bauschinger effect of micro-alloying steel which composed of ferrite and cementite phases.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1365-1367
• /
• 2008

The antibacterial activity of chitosan against Escherichia coli was investigated in the presence of NaCl, sucrose, and ethanol to assess the potential use of chitosan as a biopreservative in food products containing these components. The inhibitory activity of chitosan decreased slightly upon the addition of NaCl and sucrose, respectively to culture broth containing 100 ppm of chitosan (Mw 3,000), while the addition of ethanol enhanced the inhibitory activity of chitosan on growing cells. The addition of these components to non-growing cells prior to chitosan treatment demonstrated that NaCl protected the cells from the inhibitory activity of chitosan, while sucrose had no effect. Ethanol addition to non-growing cells increased cell death by chitosan treatment. Finally, binding of fluorescein isothiocyanate (FITC)-labeled chitosan to E. coli was measured in the presence of the food components. The FITC-labeled chitosan binding to cells decreased upon NaCl addition, was not affected by sucrose, and increased following treatment with ethanol.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.2
• /
• pp.37-44
• /
• 1990

The effect of the microstructural change on the near threshold fatigue crack growth rate in SM40C steel has been studied using the ${\Delta}K$ decreasing method. Below the total strain amplitude of 0.56%, cyclic softening occured, whereas above this value cyclic hardening occurred in the pearlitic lamellar structure. However, in the spherodized structure the cyclic hardening solely occurred. The crack growth rate in the near-threshold region was decreased with increasing prior austenite grain size and this was due to surface roughness. The crack growth rate of the spherodized structure was lower than that of the pearlite lamellar structure and the ${\Delta}K_{th}$ of the former was higher than that of the latter. It was understood that the crack propagates preferentially through the ferrite phase. The intergranular facets in the near-threshold region appeared in the spherodized structure.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.75-81
• /
• 1998

The effect of thermomechanical treatment on thermal expantion and melting point of Fe-30%Ni-0.35%C alloy was investigated. The dimention changes of the ausformed martensite and the marformed martensite were decreased with increasing deformation degree in the range of $25{\sim}350^{\circ}C$ prior to reverse transformation but became larger in the range of $500{\sim}800^{\circ}C$ after the reverse transformation. The dimension change and the thermal expansion coefficient were reduced in the order of the deformed austenite, the marformed martensite and the ausformed martensite in the range of $25{\sim}800^{\circ}C$. Therefore, the ausforming treatment is more effective than the marforming treatment in improving the heat-resistance. The melting points of the deformed austenite, the ausformed martensite and the marformed martensite were lowered as either the heating rate or the degree of deformation was increased.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.413-417
• /
• 2014

The effect of calcination treatment of raw powders prior to high temperature synthesis of Ca-${\alpha}$-SiAlON:$Eu^{2+}$ phosphor was investigated. Based on data acquired from thermogravimetric analysis, calcination temperatures were set at 600, 750, and $900^{\circ}C$. Compared to the photoluminescence (PL) intensity of direct synthesis without calcination, a similar intensity was found for the $600^{\circ}C$ treatment, a 19% increased PL intensity was found for the $750^{\circ}C$ treatment, and a 23% decreased PL intensity was found for the $900^{\circ}C$ treatment. Observation of the particle morphology of the synthesized phosphors revealed that the material transport promoted through the agglomerates formed by the $750^{\circ}C$ treatment led to enhanced PL intensity. On the other hand, the oxidation of the starting AlN particles during the $900^{\circ}C$ treatment resulted in decreased photoluminescence.

• Korean Journal of Veterinary Research
• /
• v.29 no.2
• /
• pp.129-134
• /
• 1989

Fecal samples were taken from 402 cows in Posung, Chonnam where was designated as a place for Korean native cattle breeding. Prevalence of internal parasitisms were determined by the fecal examinations using the floatation and sedimentation procedures. 62.9% of the cows were found as positive cases with excretion of the eggs of Fasciola hepatica in the fecal specimens. Of those infected with F hepatica 97 cows free of other pathogenic intestinal parasites were chosen for albendazole treatment. Albendazole tablets(10mg/kg) were administered to the cows twice at the interval of 4 weeks. Blood samples were collected via jugular vein prior to the first treatment, four weeks after the first treatment and four weeks after the second treatment, respectively. At the same time fecal samples were collected for parasitological examinations by sedimentation methods. The mean pretreatment count was 44 fluke eggs per gram of feces, which compared with 27 epg and 17 epg four weeks after the first and second treatment, respectively. Most of the hematological and biochemical values fluctuated within the normal ranges during the experiment. Eosinophil counts were high initially, decreased after the first treatment and thereafter remained steady. The opposite was the case with aspartate and alanine aminotransferases.