• 제목/요약/키워드: Printing output quality

검색결과 28건 처리시간 0.028초

도트 패턴 선택을 이용한 모델 기반 디더링 (Model-based Dithering Using Dot Pattern Selection)

  • Lee, Chae-Soo;Park, Yang-Woo;Uam, Tae-Uk;Jang, Joo-Seok;Ha, Yeong-Ho
    • 대한전자공학회논문지SP
    • /
    • 제38권3호
    • /
    • pp.247-257
    • /
    • 2001
  • 일반적 칼라 출력 장치는 제한된 범위의 색만을 재현 할 수 있다. 특히 프린터와 같이 색의 재현성이 부족한 장비에서는 하드웨어 특성에 따른 채색 면적이나 인쇄에 사용되는 용지의 특성에 따라 염료의 확산 등에 대해서도 고려해야 한다. 특히, 색을 프린트하기 위해서는 출력 과정에서 색의 선형적인 증가와 감소가 이루어져야 하며 또한 정확한 색의 모델링이 가능하여야 한다. 따라서 본 논문에서는 이를 위해 프린터 출력시 실제 채색 면적과 시각적 색감을 고려할 수 있는 디더링 방법을 제안한다. 제안된 방법은 실제 채색 면적을 고려한 패턴 데이터 베이스를 만들어 이를 디더링 패턴으로 이용하게 된다. 그리고 이 데이터 베이스에서 정확한 패턴을 선택하기 위해서는 인간시각의 색 인지력을 모델링한 대조 민감도 함수를 사용하게 된다. 따라서 본 논문에서는 저해상도의 칼라 출력장치에서도 고화질의 색을 재현할 수 있게 해준다.

  • PDF

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

PZT 캔틸레버의 길이와 면적에 따른 에너지 하베스팅 장치의 출력 특성 (Micro Power Properties of Harvesting Devices as a Function of PZT cantilever length and gross area)

  • 김인성;주현규;송재성;김민수;정순종;이대수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1246-1247
    • /
    • 2008
  • With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

  • PDF

3D 프린터용 시멘트 복합체의 간극비가 출력성과 적층성에 미치는 영향 (The Effects of Void Ratio on Extrudability and Buildability of Cement-based Composites Produced by 3D Printers)

  • 서지석;이봉춘;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권7호
    • /
    • pp.104-112
    • /
    • 2019
  • 3D 프린팅용 시멘트 복합체 모르타르의 재료적 특성을 평가하고 굳지 않은 상태에서의 모르타르 간극비를 단일지표로 하여 프린팅이 가능한 성능 범위를 산출하였다. 시험 결과, W/B가 증가하면 모르타르 흐름값은 증가하였으며 밀도와 강도는 감소하였다. SS/B가 증가하면 모르타르 흐름값은 감소하였다. 그러나 강도와 밀도는 특정 SS/B까지 증가하다 감소하였다. Ad/B가 증가할수록 모르타르 흐름값, 밀도, 강도는 감소하였다. 이러한 경향성은 따른 3D 프린팅용 모르타르의 목표 성능 만족하기 위한 배합설계를 어렵게 한다. 한편, 간극비가 증가할수록 모르타르 흐름값은 비례적으로 증가하는 반면 밀도와 강도는 감소하는 경향을 보였으며, 그 상관성은 높게 나타났다. 이는 배합설계에 따른 재료적 특성을 제어하는 단일지표로서 간극비를 활용할 수 있음을 나타낸다. 3D 프린터로 출력 가능한 모르타르 배합범위를 시험한 결과, 간극비가 0.6~0.7일 때 출력이 가능하였다. 이를 검증하기 위해 W/B 35.0 %, SS/B 60.0 %, Ad/B 0.1%를 배합하여 간극비를 0.634로 설계했을 때 출력이 가능하였다. 그러나 3D 프린팅 출력 모르타르의 품질을 향상하기 위해서는 혼화제를 활용하는 추가적인 연구가 필요하다.

SLA을 이용한 소수성 표면 제작 (Fabrication of Hydrophobic Surfaces with Stereolithography)

  • 홍성호
    • Tribology and Lubricants
    • /
    • 제37권1호
    • /
    • pp.1-6
    • /
    • 2021
  • This paper presents the experimental results of hydrophobic surfaces developed using a stereolithography-based additive-manufacturing technique. The additive manufacturing technique can be used to manufacture objects with complex geometries from computer-aided design data. Several additive manufacturing methods, such as selective laser sintering, fused deposition modeling, stereolithography apparatus (SLA), and inkjet-based system, have been developed. The SLA is a form of three-dimensional printing technology used to create prototypes, patterns, and production parts in successive layers through photochemical processes. Light causes chemical monomers and oligomers to cross-link together to form objects composed of polymers. Moreover, this method is economical for fabricating surfaces with high output resolution and quality. Here, we fabricate various surfaces using different shapes using an SLA. The surfaces with micro-patterns are fabricated for 10 cases, including the biomimetic surface. The fabricated surfaces with various micro-patterns are evaluated for hydrophobicity performance based on the static contact angle. The contact angle is measured three times for each case, and the averaged value is used. The results indicate that the arrangements in a staggered structure have a larger contact angle than those in a line when the same micro-pattern is applied. Moreover, the mimetic surfaces exhibit more hydrophobic characteristics than those of artificial micro-patterns.

3D 프린트를 활용한 자기공명영상검사 보조기구 제작 (Making Aids of Magnetic Resonacnce Image Susing 3D Printing Technology)

  • 최우전;예수영;김동현
    • 한국방사선학회논문지
    • /
    • 제10권6호
    • /
    • pp.403-409
    • /
    • 2016
  • MRI검사는 조직의 대조도가 우수하여 근골격계 진단에 유용한 검사방법이다. 근골격계 검사 시 환자상태에 따라 보조기구가 이용되는 보조기구의 종류가 다양하지 않을 뿐 아니라 비용도 비싸다. 이에 본 연구는 3D 프린팅 기술의 활용하여 MRI 검사 보조기구를 제작하였다. 보조기구 제작과정으로는 3D 모델링(3D MAX.2014, Fusion360)을 사용해 STL파일로 변환 후 슬라이싱 프로그램(Cubicreater 2.1ver., Cura 15.4ver)을 통해 G-code로 변환시킨 후 FDM방식의 프린트(Cubicon Style, MICRO MAKE)로 출력하였다. 출력물이 MRI영상에 미치는 SNR을 평가하기 위해 FDM에서 사용하되는 PLA, ABS, TPU를 두께 3mm로 된 Water Phantom 케이스를 제작하여 case 사용 전, 후를 시험을 실시하여 비교하였으며, 보조기구 사용 전, 후의 임상영상을 정성적으로 평가 하였다. 영상을 획득하여 나타난 Warter Phantom의 SNR은 T1 NON $123.778{\pm}28.492$, PLA $123.522{\pm}28.373$, ABS $124.461{\pm}25.716$, TPU $124.843{\pm}27.272$ 로 평가되었다. T2 NON $127.421{\pm}26.949$, PLA $124.501{\pm}2 7.768$, ABS $128.663{\pm}26.549$, TPU $130.171{\pm}25.998$ 로 평가되었다. 그 결과 통계 적으로 유의미한 차이를 보이지 않았다. 보조기구의 사용 전, 후의 임상영상 평가 결과 고식적 방법 $3.20{\pm}0.88$, 보조기구 사용 $3.95{\pm}0.76$ 으로 보조기구 사용 후 영상의 질이 향상되었다. 향후 3D프린팅을 이용한 보조기구의 제작은 임상적으로 사용이 가능할 것으로 생각되고, 환자들의 검사 시 보다 안전하고 편안한 보조기구제작을 할 수 있어 기존에 쓰이는 보조기구의 문제점들을 개선하는 대안이 될 것으로 전망된다.

인공어초 3D 프린팅 제작을 위한 다성분계 결합재 기반 시멘트 복합체의 성능 평가 (Performance Evaluation of Cement Composite Using Multi-Component Binder for Artificial Reef Produced by 3D Printer)

  • 서지석;김효정;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.139-147
    • /
    • 2022
  • 이 연구에서는 다양한 결합재를 혼합하여 고강도 저알칼리형 인공어초용 시멘트 복합체를 설계하고 ME 방식 3D 프린터 출력 가능성을 평가했다. 그 결과, 3D 프린팅이 가능하도록 시멘트 복합체의 유동성을 조절하기 위해서는 물-결합재비, 규사-결합재비, 규사의 종류 등을 제어하는 것이 중요한 것으로 판단된다. 출력이 가능한 정도의 흐름값을 달성한 뒤 3D 프린터 출력물의 표면품질을 양호하게 유지하기 위해서는 증점제 첨가량을 조절하는 것이 필요하다. 또한, 알파형 반수석고를 사용한 배합에서는 급결효과를 제어하기 위해 응결조절제를 사용해야하며 이 배합의 흐름값을 유지하는 시간을 도출하여 출력시 적용하는 것이 필요하다. 재료의 요구 강도를 얻기 위해서는 우선 출력이 가능한 수준의 유동성을 만족시킨 후, 배합을 조정하면 가능하다. 알파형 반수석고를 포함한 다성분계 결합재의 사용으로 저알칼리형 인공어초용 3D 프린팅 배합을 설계하고 출력성을 확인하였으나, 알칼리 저감 효과를 정량적으로 평가하기 위해서는 추후 연구가 필요하다.

자동 컬러 보정 모듈을 가진 디지털 포토 키오스크 시스템의 설계 및 구현 (Design and Implementation of Digital Photo Kiosk System with Auto Color Correction Module)

  • 박태용;이명영;박기현;하영호
    • 대한전자공학회논문지SP
    • /
    • 제43권2호
    • /
    • pp.48-56
    • /
    • 2006
  • 본 논문에서는 사용자가 원하는 미디어를 제공하기위해 터치스크린과 출력 장치인 디지털 포토 프린터 사이의 색역을 고려하는 자동 컬러 보정 모듈을 가진 디지털 사진 인화 시스템인 디지털 포토 키오스크 시스템을 설계하고 구현하였다. 이 모듈은 디지털 카메라나 카메라폰으로 촬영된 영상에 대하여 고품질의 결과물을 제공할 수 있는 이미지 보정 기능을 수행하는 것이다. 이 기능은 실시간 처리를 위해 LUT(look-up table)로 구현되어 사용자의 원터치 방식으로 동작하는 인터페이스를 제공한다. 따라서 흑백모드, 원톤 색상모드, 밝기 및 채도 조절 등의 이미지 편집 기능으로 사용자의 취향에 맞는 사진을 출력할 수 있고, 입출력 장치간의 자동 컬러 보정 모듈을 지원함으로써 본 시스템은 부드러운 계조표현과 촬영 영상과 유사한 색의 사진을 제공할 수 있다.