• 대한치과기공학회지
• /
• 제43권1호
• /
• pp.13-18
• /
• 2021

Purpose: This study aimed to compare the flexural properties and perform the Weibull analysis of photo-curing three-dimensional (3D) printing resin. Methods: Photo-curing temporary resin (3D polymer) was used as a printing resin. Specimens (65 × 10 × 3.3 ㎣) were prepared following the ISO 20975-1 guidelines and according to the different printing orientations using a digital light processing 3D printer (D2 120; Dentium). The flexural strength (FS), flexural modulus, and work of fracture (WOF) were measured using a universal testing machine (Instron 3344; Instron) at a crosshead speed of 5 mm/min. Results: In this study, the 0° orientation exhibited higher FS and WOF than the 45° orientation. Significant differences were found among the printing orientations (p<0.05). Specimens printed at the 0° orientation were the most accurate. In the Weibull analysis, 0° showed the greatest Weibull modulus (m), which represents a higher reliability. Conclusion: 3D printing should be selected and used by considering flexural properties, size accuracy, and reliability.

• 한국건설관리학회논문집
• /
• 제21권6호
• /
• pp.95-102
• /
• 2020

3D 프린팅 기술은 4차 산업 혁명의 도래와 함께 다양한 산업 분야에서 주목받고 있다. 특히 정밀한 부품을 제작하는 기계, 항공 등의 산업에서 그 활용 사례가 증가하고 있으며 건축 산업 역시 3D 프린팅 기술을 활용한 사례가 늘어나고 있는 추세이다. 현재 다양한 3D 프린팅용 소재가 개발 및 활용되고 잇지만, 3D 프린팅 제조는 사출 및 성형과 같은 기존 제조 방법과 비교하였을 때 제품의 기계적 특성이 달라질 가능성이 있다는 문제점이 있다. 본 논문은 3D 프린팅용 플라스틱 소재 중 널리 활용되고 있는 PA12 소재의 제품 제작 시 출력 방향이 제품의 기계적 특성에 미치는 영향을 검증하고 소재에 대한 이해를 확장시켜 건축 부자재 및 구조재로서의 활용 등의 실무적인 활용에 대한 기초 자료를 제공한다. 실험은 출력 방향의 영향을 확인하기 위해 0°, 30°, 45°, 60°, 90° 방향의 제품을 출력하였으며 인장 강도 실험을 통하여 인장 강도, 항복 강도, 연신율을 비교하였다. 실험 결과, 0° 방향으로 출력한 제품이 전반적으로 가장 낮은 강도와 연신율을 보였으며 45° 방향으로 출력한 제품이 가장 높은 수치를 보였다. 또한 전반적으로 0°부터 45° 사이에서는 인장강도와 항복 강도가 상승하였으며, 45°부터 90° 에서는 다소 감소하는 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1223-1227
• /
• 2010

In this study, the orientational behavior of thermotropic liquid crystals (LC) supported on a film of protein receptors was examined. Avidin was roller printed and covalently immobilized onto the surface of gold using NHS/EDC chemistry. The orientation of nematic 4-cyano-4'-pentylbiphenyl (5CB) was found to be parallel to the plane of the printed avidin surface before incubation with a solution of biotin. However, protein-receptor complexation induced a random orientation of 5CB, where protein-receptor complexes disturbed the nanoscale topography of the printed protein surface. Atomic force microscopy and ellipsometry was used to confirm printing and the specific interaction of proteins. These results demonstrate that the combination of LC and roller printing can be used to detect specific interactions between biomolecules by manipulating the orientational behavior of LC to the printed protein surfaces.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.49-55
• /
• 2002

A new method is proposed for the on-line measurement of the fiber orientation of sheet materials. The measurement of fiber orientation is very important in manufacturing paper sheets, non-woven fabrics, and glass sheets, because fiber orientation strongly affects product properties represented by, for example, dimensional stability of paper. A method developed in this research utilizes anisotropy of dielectric constants of sheet materials as a key characteristic to determine the fiber orientation. The new on-line sensor, consisting of 5 microwave dielectric resonators set in different directions, was designed to detect the fiber orientation while paper is running with high speed on a paper machine. This sensor can determine the direction and the degree of fiber orientation from the measured direction of the maximal dielectric constant and its variation, respectively. The fundamental performance of this system was examined by the static measurement of printing grade paper, which gave a satisfactory result. Then, the dynamic measurements were done at a speed of 1,000 m/min by using a high-speed test-coating machine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.463-466
• /
• 2007

It is a revolutionary technology of making color filters by ink-jet printing. The difficult reason of this method is that it is a merger technology of many fields. There must be perfect orientation systems, designed capacity and production equipment of automatically controlled printing head. Moreover, accurate ink with modification is also needed.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.217-223
• /
• 2019

복합 형상 부품 제작 및 제작 공정의 일체화 장점으로 3D 프린팅 기술의 적용 분야가 확대되고 있으며, 지속적인 연구 개발에 의해 다양한 기술방안들이 등장하고 있다. 대표적인 기술로는 파우더 형태의 소재 위에 레이저를 조사함으로써 원하는 영역을 소결 및 적층 제작하는 방식의 SLS 기술이 있으며, 고성능의 엔지니어링 플라스틱을 활용하여 실제 사용할 수 있는 부품을 제작하는 사례가 늘어나고 있다. 본 연구에서는 활용도가 높은 고분자 소재인 폴리아미드 12 소재 및 글라스 비드가 보강된 폴리아미드 12 소재를 대상으로 인장시편을 제작하여 시편 제작 방향 및 인장 시험 온도에 따른 특성 결과를 비교 분석하였다. 시편 제작방향은 작업 평면 기준으로 0°, 45°, 90° 로 구분하였으며, 인장시험온도는 -25℃, 25℃, 60℃로 조건을 구분하였다. 시험 결과로부터 제작 방향이 90°에 가까울수록 두 소재 모두 탄성률의 미세한 감소를 보였으며, 인장강도는 PA12보다 글라스 비드 보강 PA12가 제작방향에 대한 의존성을 명확하게 보였다. 또한 시험 온도 증가에 따라 탄성률 및 인장강도의 저하를 확인할 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• Journal of Information Display
• /
• 제7권2호
• /
• pp.12-15
• /
• 2006

We propose a patterning method of liquid crystal (LC) alignment layer for producing multi-domain LC structures. By controlling thermal conditions during micro-contact printing procedures and facilitating wetting properties of patterning materials, patterned LC orientation can be easily obtained on a bare ITO surface or other polymer films. The newly proposed patterning method is expected to be a very useful tool for fabricating multi-domain LC structures to enhance or design electro-optic properties of LC-based devices.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3269-3273
• /
• 2012

In this study, we report a new method for the high contrast imaging of biomolecular interactions at roller printed protein surfaces using thermotropic liquid crystals (LCs). Avidin was roller printed and covalently immobilized onto the obliquely deposited gold surface that was decorated with carboxylic acid-terminated self-assembled monolayers (SAMs). The optical response of LCs on the roller printed film of avidin contrasted sharply with that on the obliquely deposited gold surface. The binding of biotin-peroxidase to the roller printed avidin was then investigated on the obliquely deposited gold substrate. LCs exhibited a non-uniform and random orientation on the roller printed area decorated with the complex of avidin and biotin-peroxidase, while LCs displayed a uniform and planar orientation on the area without roller printed proteins. The orientational transition of LCs from uniform to non-uniform state was triggered by the erasion of nanometer-scale topographies on the roller printed surface after the binding of biotin-peroxidase to the surface-immobilized avidin. The specific binding events of protein-receptor interactions were also confirmed by atomic force microscopy and ellipsometry. These results demonstrate that the roller printing of proteins on obliquely deposited gold substrates could provide a high contrast signal for imaging biomolecular interactions using LC-based sensors.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.134-139
• /
• 2015

PolyJet technology is an additive manufacturing (AM) technology commonly used for modeling, prototyping, and production applications. It is one of the techniques used for 3D printing. The PolyJet technique is a process that joins materials to fabricate a product from 3D CAD data in a layer-by-layer manner. The orientation of a layer can affect the mechanical properties of the product manufactured by the PolyJet technique because of its anisotropy. In this paper, tensile and shearing tests of specimens were developed with the PolyJet technique in order to study the mechanical properties according to the orientation of a layer. The mechanical properties of the specimens were determined on the basis of true stress-strain curves from tensile and shearing tests. In addition, the tensile and shearing tests were simulated under the same conditions as those of experiment, and the experiment and simulated results were compared. Through this study, the fracture criteria could be established.