• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2023

This study explores a new energy partitioning approach to determine the fracture toughness of 3-D printed pristine/recycled high density polyethylene (HDPE) blends employing the essential work of fracture (EWF) concept. The traditional EWF approach conducts a uniaxial tensile test with double-edge notched tensile (DENT) specimens and measures the total energy defined by the area under a load-displacement curve until failure. The approach assumes that the entire total energy contributes to the fracture process only. This assumption is generally true for extruded polymers that fracture occurs in a material body. In contrast to the traditional extrusion manufacturing process, the current 3-D printing technique employs fused deposition modeling (FDM) that produces layer-by-layer structured specimens. This type of specimen tends to include separation energy even after the complete failure of specimens when the fracture test is conducted. The separation is not relevant to the fracture process, and the raw experimental data are likely to possess random variation or noise during fracture testing. Therefore, the current EWF approach may not be suitable for the fracture characterization of 3-D printed specimens. This paper proposed a new energy partitioning approach to exclude the irrelevant energy of the specimens caused by their intrinsic structural issues. The approach determined the energy partitioning location based on experimental data and observations. Results prove that the new approach provided more consistent results with a higher coefficient of correlation.

• The Research Journal of the Costume Culture
• /
• v.31 no.4
• /
• pp.504-518
• /
• 2023

The objective of this study was to explore the symbolism associated with phoenix patterns in China and the temporal aesthetic characteristics of these patterns found in Dunhuang Mogao Grottoes. The study involved collecting examples of clothing designs featuring phoenix patterns from China Fashion Week and the Vogue website, spanning from spring and summer of 2016 to fall and winter of 2022. After collecting and organizing these examples, representative cases were selected for analysis. The objective was to identify effective techniques for incorporating phoenix patterns within the context of Dunhuang Mogao Grottoes and provided insights for future clothing design and textile pattern design research. Phoenix patterns boasted a lengthy history and were laden with symbolic meaning. Early renditions of phoenix patterns found at Mogao Grottoes in Dunhuang were relatively simplistic in design, mainly employing elements like rhythm, coordination, balance and symmetry to convey a sense of nature and gravity. Over time, these patterns evolved under the influence of the prevailing cultural backdrop, employing repeated emphasis to portray notions of abundance and tenacity. Furthermore, regarding the use of phoenix patterns in clothing, there were four prevalent expression techniques: embroidery, beading, printing, and knitting. Traditional techniques like embroidery and beadwork often prioritized aesthetic features like coordination, emphasis, and symmetry, thereby showcasing the opulent characteristics of phoenix patterns. On the other hand, printing and knitting techniques used a single phoenix pattern or a modified version to simplify designs by emphasizing or repeating aesthetic characteristics while adhering to a modern artistic approach.

• Journal of Technologic Dentistry
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2023

Purpose: To evaluate the marginal and internal fit of metal coping fabricated by a metal three-dimensional (3D) printer that uses selective laser melting (SLM). Methods: An extraoral scanner was used to scan a die of the prepared maxillary right first molar, and the coping was designed using computer-aided design software and saved as an stereo lithography (STL) file. Ten specimens were printed with an SLM-type metal 3D printer (SLM group), and 10 more specimens were fabricated by casting the castable patterns output generated by a digital light processing-type resin 3D printer (casting the 3D printed resin patterns [CRP] group). The fit was measured using the silicon replica technique, and 8 points (A to H) were set per specimen to measure the marginal (points A, H) and internal (points B~G) gaps. The differences among the groups were compared using the Mann-Whitney U-test (α=0.05). Results: The mean of marginal fit in the SLM group was 69.67±18.04 ㎛, while in the CRP group was 117.10±41.95 ㎛. The internal fit of the SLM group was 95.18±41.20 ㎛, and that of the CRP group was 86.35±32 ㎛. As a result of statistical analysis, there was a significant difference in marginal fit between the SLM and CRP groups (p<0.05); however, there was no significant difference in internal fit between the SLM group and the CRP group (p>0.05). Conclusion: The marginal and internal fit of SLM is within the clinically acceptable range, and it seems to be applicable in terms of fit.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.237-243
• /
• 1999

스크린 프린팅법을 이용하여 NOX 감지용 WO3 후막형 가스센서를 제조하였다. 본 실험에서는 감지막의 소성 온도에따른 감도변화 및 Ru을 첨가함으로써 감도의 증진을 중점적으로 조사하였다. 또한 NO2 50 ppm하에서 CO, H2, CH4 그리고 i-C4H10등의 가스에 대하여 cross sensitivity를 조사하였다. WO3 가스센서는 소성온도 50$0^{\circ}C$, 작동온도 30$0^{\circ}C$에서 최대감도를 얻었다. 순수한 WO3에 Ru(0.004 wt%)을 첨가시 NO2 및 NO 가스에 대한 감도가 크게 증진되었다. 그러나 순수한 WO3 센서는 Ru(0.004 wt%)이 첨가된 WO3 센서보다 더 우수한 cross sensitivity를 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.236-250
• /
• 2016

Electrical Designs for Application Specific Integrated Circuits (ASIC) has undergone a change recently with the advent of the sub-wavelength lithography. The optical projection with 193 nm wavelength has been further extended with the use of immersion and other techniques. The competing trends for printing smaller design features have been discussed in this paper with the discussion of the electrical layout analysis to find unfriendly design features. The early knowledge of the unfriendly design features allows remedial actions in time for better yield on the wafer. There are existing standard design qualification criteria being used in the design and fabrication community, but they seem to be insufficient to guarantee defect free designs. This paper proposes an integrated approach for screening the layout with multiple aspects: layout geometry based, graphical analysis and process model based verification. The results have been discussed with few example design features from the 28nm design layout.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.103-108
• /
• 2009

The droplet impact and merging process on a flat substrate with contact angle hysteresis is numerically studied. The droplet deformation is determined by an improved level-set method employing a sharp-interface technique for the stress condition at the liquid-gas interface and the contact angle condition at the liquid-gas-solid interline. Based on the computations, the droplet impact and merging pattern is investigated to find the optimal condition in manufacturing a micro-line. The effects of dynamic contact angles and droplet spacing on droplet motion are quantified.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.722-728
• /
• 2010

This paper presents the design and fabrication model of a touchpad based on a contact-resistance-type force sensor. The touchpad works as a touch input device, which can sense contact location and contact force simultaneously. The touchpad is 40 mm wide and 40 mm long. The touchpad is fabricated by using a simple screen printing technique. The contact location is evaluated by the calibration setup, which has a load cell and three-axis stages. The location error is approximately 4 mm with respect to x-axis and y-axis directions. The force response of the fabricated touchpad is obtained at three points by loading and unloading of the probe. The touchpad can detect loads from 0 N to 2 N. The touchpad shows a hysteresis error rate of about 11% and uniformity error rate of about 3%.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.930_931
• /
• 2009

본 논문에서는 잉크젯 프린팅 기술을 이용하여 FPCB의 미세패턴 전극회로를 구현하였다. 이를 위하여 압전 잉크젯헤드에 의한 잉크드롭제어에 의해 전도성 잉크의 프린팅이 가능하도록 구현하였다. 그 동안 PCB 제작은 포토리소그라픽 공정에 의해 13단계 공정을 통하여 제작함으로써 폐수에 의한 환경오염, 비경제적인 비용, 긴 공정시간을 요구하였지만, 잉크젯 프린팅 기술을 적용함으로써 3단계로 공정간소화, 공정시간 단축, 비용절감의 효과를 얻을 수 있었다. 잉크젯 헤드는 당사에서 제작한 128노즐을 적용하였으며 이러한 결과 다음사양을 얻을 수 있었다. 인쇄 전극의 선폭 50um, 선폭 균일도 <15%, 패턴, 패턴 건조 큐어링 온도는 $150^{\circ}C$ 15분, 인쇄 속도 250mm/s, 720 dpi 분해능의 결과를 얻을 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.10
• /
• pp.789-796
• /
• 2009

Microdroplet deposition in a micro-groove is studied numerically. The droplet shape is determined by a level-set method which is improved by incorporating a sharp-interface modeling technique for accurately enforcing the matching conditions at the liquid-gas interface and the no-slip and contact angle conditions at an immersed solid surface. The computations are carried out to investigate the droplet behavior derived by the interfacial characteristics between the liquid-gas-solid phases. The effects of contact angle, impact velocity and groove geometry on droplet deposition in a micro-groove are quantified.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.8 no.1
• /
• pp.1-20
• /
• 1990

$\alpha$,$\beta$,$\varepsilon$ type copper phthalocy $\alpha$,$\beta$,$\varepsilon$ type copper phthalocyanine(CuPc) pigment was purified by a simple train sublimation technique. The layered photoconductor was made with $\varepsilon$ type CuPc as a carrier generation layer(CGL) and polyvinly carvazol(PVCz) as a carrier transport layer(CLT). A CGL of CuPc was electrochemical deposited on an Al substrate used as cathode in pigment dispersion solutions. a CTL of PVCz pwas spin coated on $\varepsilon$ type CuPc thin film by a spin coater. The effect of sonication time, electrophotographic property of the layered photoconductor were studied with surface coverage, surface potential and sensitivity.