• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.352-355
• /
• 2007

We have developed tight bonding of plastic LCD with new rigid spacer. For tight bonding of two plastic substrates, we designed structures to collect UV or thermal epoxy placed on the top of rigid spacer spontaneously by capillary effect. We confirmed that tight bonded plastic LCD has a good adhesion without induced defects and a high mechanical stability against the various external deformations. This method can be applicable to the fabrication of large plastic LCDs using stamping process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.851-854
• /
• 2000

Digital halftoning is a technique to make an equivalent binary image from scanned photo or graphic images. Low pass filtering characteristic of human visual system can be applied to get the effect of spatial averaging of local area consisted of black and white pixels for gray image. The overlapping of black dot decreases brightness and black dot is very sensitive to human visual system in the bright region. In this paper, for gray-level expression, only bright gray region in the color image is considered for blue noise mask (BNM) approach. To solve this problem, BNM with CMY dot is used for the bright region instead of black dot. Dot-on-dot model with single mask causes the problem making much black dot overlap, color distortion. Therefore approach with three masks for C, M and Y each is proposed to decrease pixel overlap and color distortion.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.190-201
• /
• 2017

This paper proposes how to solve a problem of FDM 3D printer's irregular output when changing volume of extrusion, adjusting movement speed of the printer's head and a way to fill new inner part. Existing slicers adjust directly to change the rotation speed of the stepper. In this method, the change of the extrusion area is delayed due to the gap between the stepper and the nozzle, so that precise control is difficult. We control the extrusion area adjusting the moving speed of the print head and making constantly the rotation speed of the stepper. Thus, the output time can be shortened by generating an efficient path having a short travel distance. For evaluation, we applied our method to lithophanes with detailed variation. Comparing existing methods, our method reduced output time at least 30%.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권1호
• /
• pp.38-43
• /
• 1996

A coprecipitation method was used for preparing Ca and Pt doped $SnO_2$ fine powder. Components of the powder were investigated by XPS and SIMS. Crystallite size and specific surface area were investigated by TEM, XRD, and BET analysis. $SnO_2$(Ca)/Pt based thick film devices were prepared by a screen printing technique for methane gas detection. Then sensing characteristics of the devices were investigated. As Ca and Pt added, the crystal growth of $SnO_2$ was suppressed during calcining and sintering, and the sensitivity of $SnO_2$(Ca)/Pt thick film to methane gas was enhanced. For the Pt doped $SnO_2$ fine particle, the thick film device shows sensitivity of about 83% to 2000 ppm methane gas at an operating temperature of >$400^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1529-1531
• /
• 2003

Thick film mechanical sensors can be categorized into four main areas piezoresistive, piezoelectric, piezocapastive and mechanic tube. In this areas, the thick film strain gage is the earliest example of a primary sensing element based on the substrates. The latest thick film sensor is used various pastes that have been specifically developed for pressure sensor application. The screen printing technique has been used to fabricate the pressure sensors on alumina substrate($Al_2O_3$). Thick film capacitive of strain sensing characteristics are reported and dielectric paste based on (Ti+Ba) materials. The electric property of dielectric paste has been studied and exhibit good properly with good gage factor comparable to piezoresistive strain gage. New piezocapacitive strain sensor was designed and tested. The output of capacitive value was good characteristics.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.17-24
• /
• 2000

The Joint Photographic Experts Group (JPEG) is a standara still-image compression technique, established by the International for Standardization (ISO) and International Telecommunication Standardization Sector (ITUT). The standard is intended to be utilized in the various kinds of color still imaging systems as a standard color image coding format. Because JPEG is a lossy compression, the decompressed image pixel values are nto the same as values before compression. Image of JPEG compression is often made to JPEG recompression at saving to apply JPEG compression of color image. In general, JPEG is a lossy compression and compression image is predicted to be varied image quality according to recompressed Q-factor. Various distortions of JPEG compression and JPEG recompression has been reported in previous paper. In this paper, we compress four difference color samples (photo image, gradient image, vector drawing image, text image) according to various Q-factor, and then compressed images are recompressed according to various Q-factor once again. As the results, we inspect variation of quality and file size of recompressed color image, and ensure the optimum recompression factor.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.215-219
• /
• 2009

A packaging technology based on flip-chip bonding and Pb-free solder for silicon pressure sensors on printed circuit board (PCB) is presented. First, the bump formation process was conducted by Pb-free solder. Ag-Sn-Cu solder and the pressed-screen printing method were used to fabricate solder bumps. The fabricated solder bumps had $189-223{\mu}m$ width, $120-160{\mu}m$ thickness, and 5.4-6.9 standard deviation. Also, shear tests was conducted to measure the bump shear strength by a Dage 2400 PC shear tester; the average shear strength was 74 g at 0.125 mm/s of test speed and $5{\mu}m$ shear height. Then, silicon pressure sensor packaging was implemented using the Pb-free solder and bump formation process. The characteristics of the pressure sensor were analogous to the results obtained when the pressure sensor dice are assembled and packaged using the standard wire-bonding technique.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.66-71
• /
• 1996

최근 섬유제품의 소비패턴이 고급화, 다양화, 개성화됨에 따라 이에 부응한 고기능성과 감성을 지닌 제품의 생산이 요구되고 있다. 이러한 요구에 따라 날염은 유행의 변화에 신속하게 대응하고 다양한 색상과 디자인의 변화를 부여함으로써 각광을 받으며 발전하여 왔다. 그러나 소비자의 요구는 화려한 색상과 정교한 디자인을 요구하고 있으며 점차 환경규제가 높아지고 있으므로 여기에 대응한 날염기술의 발전이 시급한 실정이다. 전사날염기술은 이러한 요구를 만족시킬수 있다는 점에서 관심의 대상이 되어 폭발적인 인기를 누리며 발전하여 왔다. 또한 전사날염은 衣料用 섬유소재 뿐 아니라 카페트, 인테리어 제품과 다른 소재에의 적용으로 확대되어지고 있다. 그러나 열전사날염은 천연섬유에 적용하기 어려운 문제점도 있다. 이 글에서는 전사날염의 개요를 알아보고 천연섬유및 그 혼방품에 대한 실용화를 위한 시도방법과 섬유제품이외의 소재에 대한 응용방법에 대하여 알아보고자 한다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권3호
• /
• pp.253-260
• /
• 2021

Therapeutic injections into the craniofacial region can be a complex procedure because of the nature of its anatomical structure. This technical note demonstrates a process for creating an extra-oral template to inject therapeutic substances into the temporomandibular joint and the lateral pterygoid muscle. The described process involves merging cone-beam computed tomography data and extra-oral facial scans obtained using a mobile device to establish a correlated data set for virtual planning. Virtual injection points were simulated using existing dental implant planning software to assist clinicians in precisely targeting specific anatomical structures. A template was designed and then 3D printed. The printed template showed adequate surface fit. This innovative process demonstrates a potential new clinical technique. However, further validation and in vivo trials are necessary to assess its full potential.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.367-378
• /
• 2023

최근 CAD-CAM (computer-aided design-computer-aided manufacturing) 기술 및 3D 프린팅 기술의 발전과 함께 다양한 디지털 기법들의 도입으로 top-down 방식의 최종 보철 수복의 정확성과 효율성이 증대되고 있다. 본 증례는 전후 엇갈린 교합을 가진 환자에서 총 9개의 상하악 구치부 임플란트 식립을 통해 안정적인 교합 지지를 얻으면서 잔존 치조골의 고도 흡수 경향을 보인 상악 전치부 무치악 부위는 케네디 4급 임플란트 보조 국소의치로 수복함으로써 연조직의 심미성을 회복하였다. 전산화단층촬영 가이드 수술로 계획된 위치에 임플란트를 식립하고, 이중 스캔 기법으로 임시 수복 단계에서 안정화된 교합을 최종 보철물에 반영하며, 코핑과 프레임워크를 금속 3D 프린팅으로 제작하여 효율적이며 예측 가능한 top-down 방식의 전악 구강 수복을 달성하였기에 이를 보고하고자 한다.