• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.9-18
• /
• 2022

Purpose: The purpose of this study was to evaluate whether three-dimensional (3D)-printed flexible denture resin has suitable mechanical properties for use as a thermoplastic denture base resin material. Materials and Methods: A total of 96 specimens were prepared using the 3D printed flexible denture resin (Flexible Denture). Specimens were designed in CAD software (Tinkercad) and printed through a digital light-processing 3D printer (Asiga MAX UV). Post-polymerization process was conducted according to air exposure or glycerin immersion at 35℃ or 60℃ and for 30 or 60 minutes. The maximum flexural strength, elastic modulus, 0.2% offset yield strength, and Vickers hardness of 3D-printed flexible denture resin were assessed. Result: The maximum flexural strength ranged from 64.46±2.03 to 84.25±4.32 MPa, the 0.2% offset yield strength ranged from 35.28±1.05 to 46.13±2.33 MPa, the elastic modulus ranged from 1,764.70±64.66 to 2,179.16±140.01 MPa, and the Vickers hardness ranged from 7.01±0.40 to 11.45±0.69 kg/mm². Conclusion: Within the limits of the present study, the maximum flexural strength, 0.2% offset yield strength, elastic modulus, and Vickers hardness are sufficient for clinical use under the post-polymerization conditions of 60℃ at 60 minutes with or without glycerin precipitation.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1033-1038
• /
• 2022

본 논문에서는 3.5GHz 대역에 대해 측면 결합 선로(BCS:Broadside Coupled Striplines)에 의해 공급되는 프린트 다이폴 안테나의 설계 제작에 대해 연구하였다. 프린트 다이폴 안테나의 두 Arm(암)은 각각 기판의 양면에 있습니다. 1×2배열 안테나에 적용된 공급 균형 라인은 BCS입니다. 프린트 다이폴 안테나의 여러 파라미터 연구를 하였고, 시뮬레이션 결과는 최종 실험 데이터와 일치하였다. 실험 결과 원하는 주파수 대역에서 가장 넓은 대역폭을 나타내며 VSWR < 2.0:1 대해 28%의 대역폭을 보였다. 기존 프린트 다이폴 안테나의 단점인 협대역과 배열 시 급전선 특성을 개선할 수 있음을 알 수 있었다. 수평면 방사패턴은 전방향 특성을 보였고 최대 이득은 4.4dBi를 보였다.

• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.249-257
• /
• 2022

Objective: The purpose of this study was to evaluate and compare the dimensional accuracy between thermoformed and direct-printed aligners. Methods: Three types of aligners were manufactured from the same reference standard tessellation language (STL) file: thermoformed aligners were manufactured using Zendura FLX^TM (n = 12) and Essix ACE^TM (n = 12), and direct-printed aligners were printed using Tera Harz^TM TC-85DAP 3D Printer UV Resin (n = 12). The teeth were not manipulated with any tooth-moving software in this study. The samples were sprayed with an opaque scanning spray, scanned, imported to Geomagic^® Control X^TM metrology software, and superimposed on the reference STL file by using the best-fit alignment algorithm. Distances between the aligner meshes and the reference STL file were measured at nine anatomical landmarks. Results: Mean absolute discrepancies in the Zendura FLX^TM aligners ranged from 0.076 ± 0.057 mm to 0.260 ± 0.089 mm and those in the Essix ACE^TM aligners ranged from 0.188 ± 0.271 mm to 0.457 ± 0.350 mm, while in the direct-printed aligners, they ranged from 0.079 ± 0.054 mm to 0.224 ± 0.041 mm. Root mean square values, representing the overall trueness, ranged from 0.209 ± 0.094 mm for Essix ACE^TM, 0.188 ± 0.074 mm for Zendura FLX^TM, and 0.140 ± 0.020 mm for the direct-printed aligners. Conclusions: This study showed greater trueness and precision of direct-printed aligners than thermoformed aligners.

• 한국의류학회지
• /
• 제46권3호
• /
• pp.375-389
• /
• 2022

3D printing has been considered a key technology, leading the fourth industrial revolution. However, 3D printed textile still has a lot of limitations to overcome before it can be adopted as a clothing material in terms of design, flexibility and dyeability. This study aims to provide modeling design for imparting the flexibility and post-dyeing process for 3D printed textiles. The modeling types were designed to test the flexibility of 3D printed textiles. The post-dyeing process was evaluated through dye absorption depending on the resin and modeling types, respectively. The results were as follows: two types of modeling (Modeling A and B) were designed with a ring structure to test the flexibility of the 3D printed textiles. The 3D printed textiles with ring-based structure Modeling A had flexibility regardless of the hardness of resin types. In the dyeability test, softening resin (S-Resin) and hardening resin (H-Resin) were found to have good dyeability with acid dye and direct dye, respectively. The condition of S-Resin with acid dye and H-Resin with direct dye was controlled by dye absorption rate.

• 대한치과기공학회지
• /
• 제45권2호
• /
• pp.39-47
• /
• 2023

Purpose: This study aimed to confirm the applicability of gloss polishing using automatic barrel finishing with respect to three-dimensional (3D)-printed resin specimens. The surface roughness and grinding angle of the 3D-printed resin specimens were observed with respect to gloss polishing time using automatic dental barrel finishing. Methods: Herein, experiments were conducted on four types of 3D-printed resin specimens. The specimens, with a thickness of 100 ㎛ each, were printed using a 3D printer. Subsequently, light polymerization was performed on these specimens for 15 min. Post this surface treatment, the specimens underwent grinding for 25 min. This process was followed by gloss polishing at 5-min intervals for up to 25 min using automatic dental barrel finishing. The specimens were photographed using a 3D optical microscope, and their surface roughness and grinding angle were measured. Results: The Ra (centerline average roughness) values of all the specimens, except for crown & bridge 10 group and those in the control group that were not polished using automatic barrel finishing, were <0.2 ㎛. However, polishing time needs to be controlled to realize the desired surface roughness and grinding amount considering the hardness of the resin used. Conclusion: Gloss polishing of 3D-printed resin can be realized using automatic dental barrel finishing. However, polishing time needs to be controlled to realize the desired surface roughness and grinding amount considering the hardness of the resin used.

• 대한토목학회논문집
• /
• 제44권2호
• /
• pp.141-147
• /
• 2024

본 연구에서는 마이크로 CT 이미지를 활용하여 3D 프린팅 콘크리트의 공극분포 특성에 따른 인장파괴 강도를 확인하였다. 3D 프린팅 기법으로 출력된 콘크리트 구조물은 일반적인 시편과는 다르게 적층방향 및 필라멘트 접촉면의 존재에 따라 공극의 방향성을 갖는다. 이에 따라 3D 프린팅 콘크리트 시편의 공극분포를 확률론적 방법으로 분석하고, 유한요소기법을 통해 방향별 인장강도를 분석하였다. 3D 프린팅된 시편 내부의 공극이 방향성을 갖는 것을 확인하였고, 출력에 의한 미세구조 특성-강도의 영향성을 평가하였다. 본 연구는 마이크로 CT 이미지 기반의 공극 분포 특성을 분석하고 시뮬레이션을 활용한 기계적 물성 평가를 수행하여 보다 향상된 성능의 적층 구조물 설계 및 재료 개발에 활용하고자 한다.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.124-127
• /
• 2004

A novel printed inverted-F antenna for dual-band WLAN is presented. The proposed design is based on the folded quarter-wave antennas, which have a conductor plate having two arms. An extremely thin prototype antenna is fabricated according to the simulation result. The obtained antenna can perform in IEEE802.11a, b(2.4～2.484 GHz and 5.15～5.35 GHz bands) and be adopted for laptop applications. All the measurements are performed in the actual test fixture.

• 전자공학회논문지A
• /
• 제30A권3호
• /
• pp.95-103
• /
• 1993

A noise simulation software is developed to estimate crosstalk and reflection noise in multi-layer printed circuit boards having upto 20 layers and carrying signals of 100 MHz range. The simulation software can handle up to 1000 nets yielding accurate noise value associated with each net. The calculation results can be used to build optimal printed citcuit boards used in high speed computers and telecommunication equipments.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.161-161
• /
• 2020

• 한국인쇄학회지
• /
• 제30권1호
• /
• pp.21-33
• /
• 2012

This research attempts to analyze the effect of printed-saving coupons distributed by major discount store on consumer purchasing intention. Those consumers having used printed-saving coupon in major discount store in Daejeon were selected as respondents. 121 copies were retreated from 150 questionnaires. For data analysis, frequency analysis for respondents' characteristics, Cronbach's alpha for reliability of analysis, and $X^2$ test of multi-regression analysis for testing hypothesis were utilized. The result of analysis shows 1) the way of using coupon is respectively different according to sex, age group, marital status, term of coupon, and the number of using coupon; 2) Attributes of coupon partially influence on purchasing intention of consumers. Only shopping cost cutting is insignificant, while keeping convenience, impulse buying, scheduled purchasing are significant. The most effective variable is scheduled purchasing, keeping convenience, and impulse buying influence on purchasing intension of consumers. Therefore, offering printed-coupon by major discount store is useful tool to induce consumers to planned purchasing.