DOI QR코드

DOI QR Code

Evaluation of Modeling Design and Dyeability of DLP 3D Printed Textiles

DLP 3D Printed Textile의 유연성 향상을 위한 모델링 디자인 및 염색성 평가

  • Shim, Yeon Je (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Kim, Hyunjin (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Kim, Hye Rim (Dept. of Clothing and Textiles, Sookmyung Women's University/Design Research Institute for Creativity and Convergence, Sookmyung Women's University)
  • 심연제 (숙명여자대학교 의류학과) ;
  • 김현진 (숙명여자대학교 의류학과) ;
  • 김혜림 (숙명여자대학교 의류학과/숙명여자대학교 창의융합 디자인연구소)
  • Received : 2021.06.29
  • Accepted : 2022.03.24
  • Published : 2022.06.30

Abstract

3D printing has been considered a key technology, leading the fourth industrial revolution. However, 3D printed textile still has a lot of limitations to overcome before it can be adopted as a clothing material in terms of design, flexibility and dyeability. This study aims to provide modeling design for imparting the flexibility and post-dyeing process for 3D printed textiles. The modeling types were designed to test the flexibility of 3D printed textiles. The post-dyeing process was evaluated through dye absorption depending on the resin and modeling types, respectively. The results were as follows: two types of modeling (Modeling A and B) were designed with a ring structure to test the flexibility of the 3D printed textiles. The 3D printed textiles with ring-based structure Modeling A had flexibility regardless of the hardness of resin types. In the dyeability test, softening resin (S-Resin) and hardening resin (H-Resin) were found to have good dyeability with acid dye and direct dye, respectively. The condition of S-Resin with acid dye and H-Resin with direct dye was controlled by dye absorption rate.

Keywords

References

  1. Aksay, S. (2019). Effects of Al dopant on XRD, FT-IR and UV-vis properties of MgO films. Physica B: Condensed Matter, 570, 280-284. doi:10.1016/j.physb.2019.06.020
  2. Ao, D., Zhang, J., & Liu, H. (2018). Visible-light-driven photocatalytic degradation of pollutants over Cu-doped NH2-MIL-125(Ti). Journal of Photochemistry and Photobiology A: C hemistry, 364, 524-533. doi:10.1016/j.jphotochem.2018.06.044
  3. Azambuja, E. (2017, March 3). 3D printing with cellulose. Electronic Specifier. Retrieved from https://www.electronicspecifier.com/products/3d-printing/3d-printing-with-cellulose
  4. Bai, S.-K. (2004). The study of the dyeability of Brassica Campestris on the cotton fabric. Journal of the Korean Society for Clothing Industry, 6(6), 799-802.
  5. Barkane, A., Platnieks, O., Jurinovs, M., & Gaidukovs, S. (2020). Thermal stability of UV-cured vegetable oil epoxidized acrylate-based polymer system for 3D printing application. Polymer Degradation and Stability, 181:109347. doi:10.1016/j.polymdegradstab.2020.109347
  6. Carlota, V. (2020, March 4). 3D printed shoes: what's available on the market today? 3Dnatives. Retrieved from https://www.3dnatives.com/en/3d-printed-shoes-whats-available-on-the-market-today/#!
  7. Chen, S., Duan, Y., Hua, W., Lin, Q., Qu, B., Wang, R., ... Zhuo, D. (2022). Synthesis of novel acrylic liquid-crystal resin and its in-situ enhancement in light-curing 3D printing performance. Journal of Materials Research and Technology, 17, 2158-2174. doi:10.1016/j.jmrt.2022.01.159
  8. Cho, A. (2003). Fabrics dyeing using natural colorants extracted from American Fleabane (Unpublished master's thesis). Chonnam National University, Gwangju.
  9. Choi, Y. J., & Ryu, H. S. (1995). A study on the dyeability of the aminized cotton fabrics. Journal of the Korean Society of Clothing and Textiles, 19(1), 51-56.
  10. Claesson, H., Scheurer, C., Malmstrom, E., Johansson, M., Hult, A., Paulus, W., & Schwalm, R. (2004). Semi-crystalline thermoset resins: tailoring rheological properties in melt using comb structures with crystalline grafts. Progress in Organic Coatings, 49(1), 13-22. doi:10.1016/j.porgcoat.2003.07.001
  11. Dengate, J. (2016, April 11). New Balance wins race for 3D printed running shoe. Runner's World. Retrieved from https://www.runnersworld.com/news/a20792199/new-balance-wins-race-for-3d-printed-running-shoe/
  12. Du, Y. (2019). A study of fashion design development based on denim recycling (Unpublished master's thesis). Kookmin University, Seoul.
  13. El-Shishtawy, R. M., Nassar, S. H., & Ahmed, N. S. E. (2007). Anionic colouration of acrylic fibre. Part II: Printing with reactive, acid and direct dyes. Dyes and Pigments, 74(1), 215-222. doi:10.1016/j.dyepig.2006.01.036
  14. FacFox. (2021, August 5). How to dye resin 3D prints? FacFox. Retrieved from https://facfox.com/docs/kb/how-to-dye-resin-3d-prints
  15. Han, Y., & Kim, J. (2019). Study on peel strength measurement of 3D printing composite fabric by using FDM. Journal of Fashion Business, 23(2), 77-88. doi:10.12940/JFB.2019.23.2.77
  16. Hornick, J., & Bhushan, A. (2016, October 3). More 3D printing patents are expiring soon: Here's a roundup. 3D Printing Industry. Retrieved from https://3dprintingindustry.com/news/more-3d-printing-patents-are-expiring-soon-heres-a-roundup-96561/
  17. Ji, Z., Yan, C., Yu, B., Wang, X., & Zhou, F. (2017). Multimaterials 3D printing for free assembly manufacturing of magnetic driving soft actuator. Advanced Materials Interfaces, 4(22):1700629. doi:10.1002/admi.201700629
  18. Jin, Y., Qamar, I., Wessely, M., Adhikari, A., Bulovic, K., Punpongsanon, P., & Mueller, S. (2019). Photo-chromeleon: Reprogrammable multi-color textures using photochromic dyes. Proceedings of the 32nd Annual ACM Symposium on User Interface Software and Technology, USA, 701-712. doi:10.1145/3332165.3347905
  19. Jo, J. H. (2006, December 4). 광통신용 고분자 신소재의 연구개발 동향 [R&D trend of new polymer materials for optical communication]. TECHWORLD. Retrieved from http://www.epnc.co.kr/news/articleView.html?idxno=6550
  20. Kabir, S., Kim, H., & Lee, S. (2020). Characterization of 3D printed auxetic sinusoidal patterns/nylon composite fabrics. Fibers and Polymers, 21(6), 1372-1381. doi:10.1007/s12221-020-9507-6
  21. Kim, H., & Lee, S. (2020). Mechanical properties of 3D printed re-entrant pattern with various hardness types of TPU filament manufactured through FDM 3D printing. Textile Scien ce and Engineering, 57(3), 166-176. doi:10.12772/TSE.2020.57.166
  22. Kim, H., Song, J. E., Silva, C., & Kim, H. R. (2020). Production of conductive bacterial cellulose-polyaniline membranes in the presence of metal salts. Textile Research Journal, 90(13-14), 1517-1526. doi:10.1177/0040517519893717
  23. Kim, S. (2019). The textile development using DLP 3D printing system and polyurethane acrylate photopolymer (Unpublished master's thesis). Sookmyung Women's University, Seoul.
  24. Kim, S., & Choi, Y.-L. (2016). 3D printing technology in fashion industry. Fashion Information and Technology, 13, 60-65.
  25. Kim, S. G., & Kim, H. R. (2018). The recent tendency of fashion textiles by 3D printing. Fashion & Textile Research Journal, 20(2), 117-127. doi:10.5805/sfti.2018.20.2.117
  26. Kim, S. G., Song, J. E., & Kim, H. R. (2020). Development of fabrics by digital light processing three-dimensional printing technology and using a polyurethane acrylate photopolymer. Textile Research Journal, 90(7-8), 847-856. doi:10.1177/0040517519881821
  27. Ko, C., & Lee, W. G. (2021). Cleaning behavior of aqueous solution containing amine or carboxylic acid in Cu-interconnection process. Korean Chemical Engineering Research, 59(4), 632-638. doi:10.9713/kcer.2021.59.4.632
  28. Lee, J. H. (2017, June 29). 4차 산업혁명 시대 3D 프린터 창업, 은퇴자들의 희망 될까 [Starting 3D printer business in the era of the 4th industrial revolution, would it be a hope for retirees?]. BRAVO my life. Retrieved from https://bravo.etoday.co.kr/view/atc_view.php?varAtcId=7260
  29. Lee, J. S., & Huh, J. S. (2017). Study of textile structure using 3D printing-focused on the comparison of FDM and DLP-. Korea Science & Art Forum, 31, 329-340. doi:10.17548/ksaf. 2017.12.30.329
  30. Lee, J. S., & Jin, S. M. (2017). Study on fashion design using DLP 3D printing. Journal of Basic Design & Art, 18(5), 449-460.
  31. Lee, S., & Kim, H. (2020). Mechanical properties of 3D printing spacer fabric structures manufactured using fused deposition modeling 3D printing technology. Textile Science and Engineering, 57(2), 77-84, doi:10.12772/TSE.2020.57.077
  32. Lee, S. H. (2015). Morphology and properties of textiles manufactured by three-dimensional printing based on fused deposition modeling. Textile Science and Engineering, 52(4), 272-279. doi:10.12772/TSE.2015.52.272
  33. Lesbani, A., Taher, T., Palapa, N. R., Mohadi, R., Rachmat, A., & Mardiyanto. (2020). Preparation and utilization of Keggin-type polyoxometalate intercalated Ni-Fe layered double hydroxides for enhanced adsorptive removal of cationic dye. SN Applied Sciences, 2(3):470. doi:10.1007/s42452-020-2300-8
  34. Liu, H., Chen, Y., Shi, C., Yang, X., & Han, D. (2020). FT-IR and Raman spectroscopy data fusion with chemometrics for simultaneous determination of chemical quality indices of edible oils during thermal oxidation. LWT - Food Science and Technology, 119:108906. doi:10.1016/j.lwt.2019.108906
  35. Lu, W. H., Xu, W. J., Wu, Y. M., Zhou, X., Lu, Y. B., & Xiong, Y. Q. (2006). Synthesis of dendritic poly(urethane acrylate) used for UV-curable coatings. Progress in Organic Coatings, 56(2-3), 252-255. doi:10.1016/j.porgcoat.2005.10.004
  36. Manufactur3D. (2020, October 15). How Nike is leveraging 3D printing in the footwear industry. Manufactur3D. Retrieved from https://manufactur3dmag.com/how-nike-is-leveraging-3d-printing-in-the-footwear-industry/
  37. Ministry of Science and ICT. (2020, June). 제2차 3D프린팅 산업진흥 기본계획(2020~2022) [Basic plan for promoting 3D printing industry (2020-2022)]. Ministry of Science and ICT. Retrieved from https://www.msit.go.kr/publicinfo/view.do?sCode=user&mPid=62&mId=63&publictSeqNo=246&publictListSeqNo=2&formMode=R&referKey=246,2
  38. Park, Y.-J., Yun, J.-G., Jang, H.-G., & Heo, B.-G. (2005). Effect of dyeing conditions on dyeing characteristics in silk during natural dyeing using the raw juice of indigo plants. Korean Journal of Plant Resources, 18(3), 417-423.
  39. Saunders, S. (2018, June 13). 3D printing viscous materials: Advances toward 3D printed rocket fuel, pharmaceuticals, cookie dough. 3DR Holdings. Retrieved from https://3dprint.com/216640/purdue-3d-print-viscous-materials/
  40. Sobuj, S. R. (2017, January 21). Crystalline and amorphous structure of fiber. Textile Study Center. Retrieved from https://textilestudycenter.com/cry-str-fiber/
  41. Song, C. E., Kim, K. S., Jang, H. G., Yoo, Y. K., Heo, B. G., & Park, Y. J. (2004). Natural dye on dry flower, the Laqurus ovatus using the extract isolated from marigold. Korean Journal of Horticultural Science & Technology, 22(1), 119-124.
  42. Song, J. E., Su, J., Loureiro, A., Martins, M., Cavaco-Paulo, A., Kim, H. R., & Silva, C. (2017). Ultrasound-assisted swelling of bacterial cellulose. Engineering in Life Sciences, 17(10), 1108-1117. doi:10.1002/elsc.201700085
  43. Song, W. S., Kim, I. Y., & Kim, H. R. (2012). Textiles (3rd ed.). Paju: Kyomunsa
  44. Theivandran, G., Mohamed Ibrahim, S., & Murugan, M. (2015). Fourier Transform Infrared (Ft-Ir) spectroscopic analysis of Spirulina Fusiformis. Journal of Medicinal Plants Studies, 3(4), 30-32.
  45. Yoo, H. J., Lee, H.-J., Han, Y., Song, K. H., Kim, J. H., & Ahn, C. (2014). Textile dyeing and finishing. Seoul: Hyungseul Publishing.
  46. Zulkifli, F., Ali, N., Yusof, M. S. M., Isa, M. I. N., Yabuki, A., & Wan Nik, W. B. (2017). Henna leaves extract as a corrosion inhibitor in acrylic resin coating. Progress in Organic Coatings, 105, 310-319. doi:10.1016/j.porgcoat.2017.01.017