• 한국실내디자인학회논문집
• /
• 제18권1호
• /
• pp.43-53
• /
• 2009

This study is to investigate the utilization of Indoor Proscenium Stage Zone Lighting method in the dancing performance. In other words, it is about how we can utilize the principle of zone lighting in dancing performance, a kind of stage art. Stage lights give lights on the stage. Therefore they play big and important roles in dancing performances. Lightings make big influence on the overall atvosphere and situations of the dancing work but most of dancers do not perceive their importance and furthermore they don't know about the lightings very well. To let them know about stage lightings better, we studied lightings form the perspective of the dancers who face the lightings without great knowledge thresh the articles and literature related general lightings and lighting design, books related to stage lightings and dancing lightings, previous studies and academic articles. The most important part of this study is to understand and utilize the principle of zone lightiing. Zone lighting is generally called as cross lighting, which means single light from the crossed two lights. When looking into the principle of the zone lighting of the Indoor Proscenium Stage, it means 45 degree lighting from both sides of the top form the point of the dancer When more than two lights are used, the angle of the light should be $90^{\circ}$or 120. It is the principle of the lighting technology showing the face and body of the dancers ing three dimension. Applying for the principle of this zone lighting to the dancing performance of Indoor Proscenium Stage, the lighting methods and the usage of the lightings were studied. As shown above, the role of the lighting is very important in dancing configuration. We hope that the perception on the dancing lighting will be changed and studies on the dancing lightings. By understanding and applying more principles of lighting, we will make efforts to make better dancing performance and dancing conporsers and dancers shall make more efforts and studies on lighting for better works. Through such efforts, we can have more experts and professionals In dancing lighting field and they will help us to describe and express the intention of the dancing work better as dancing artists. We hope that there will be better quality performances through more and diversified studies in this field.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권5호
• /
• pp.235-240
• /
• 2000

A low cost lighting system for line-scan cameras has been developed with 3-phase power. When exposure time of line-scan camera is shorter than fluctuation period of illumination, the average gray value of each acquired 1-D image varies. Detecting defects on the objects's surface under such illuminating environment is very difficult. The proposed lighting system is composed of low-cost fluorescent lights based on 3-phase power. The specially designed lighting pack and the properly selected lighting position enable to get the rippleless lighting. The principle of the proposed lighting system has been explained analytically. The lighting system has been tested for fabric inspection with line-scan camera and it's efficacy has been proved.

• 한국실내디자인학회논문집
• /
• 제17호
• /
• pp.128-135
• /
• 1998

The first issue was concerning the subject to provide students with an understanding of the principle of light its concept mental factors etc and with the observation and analysis of the light of an object and its form which is the process for designers to be able to deal with the deeper design concept by complementing the setting of necessary concept. The second issue was concerning the process of basic learning about basic electricity and lighting that lighting designers or interior decoration and architecture designer should have such as the introduction of light in kind of light source lighting system and so forth. The third issue was focused on practical affairs such as design and expression techniques the calculation of illumination using the computer simulation and so on. In addition such issues as the history of lighting photograph and its linkage with the field of engineering about new material ware addressed.

• 한국조명전기설비학회지:조명전기설비
• /
• 제4권1호
• /
• pp.41-45
• /
• 1990

교량 부각 조명 및 교각 조명 계획의 과정과 요소를 고찰함으로써 교량 조형물 외부 조명 계획의 주요 문제를 추론하고 그 해결 방안 및 체계적인 접근을 위한 설계의 기초 방안을 제시하고자 한다. 본 연구에서 한강대교의 아아치와 교각부각조명과 잠실대교의 수중보 부각조명을 통하여 각 계획의 제한 조건하에서의 설계목적의 부합성, 유지보수의 용이성, 설계효과의 극대화를 달성하기 위한 설계제한조건의 해결 방법을 모색하였다.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.30-36
• /
• 2015

The principle of an illumination and projection system including LED light sources for a spot type stage lighting system was presented, and its optical system was designed with optimizing parameters by the analytical methods. A dichroic mirror incorporated with an illumination system to optimizing LED source positions and to obtain the compact system. The projection system was optimized with specific constraints such as a chromatic aberration, distortion aberration and angle of incidence angles. Optimized design system has a beam angle from $10^{\circ}$ to $45^{\circ}$, and its illuminance was 4,500lux at distance of 6m on the work plane.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.9-15
• /
• 2014

This paper focuses on the heat gain of a lighting system, one of the most-used appliances in buildings, and its thermal effect within a low energy building. In this study, a dynamic thermal model of a lighting system is first established based on the first principle of thermodynamics. Then, thermal parameters of this model are estimated by experiments and an optimization process. Afterward, the obtained model of the system is validated by comparing simulation results to experimental one. Finally it is integrated into a low energy building model in order to quantify its thermal influence within a low energy building. As a result, heat flux of the lighting system, indoor temperature and heating energy demands of the building are obtained and compared with the results obtained by the conventional model of a lighting system. This paper helps to understand thermal dynamics of a lighting system and to further apply lighting systems for energy management of low energy buildings.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.99-104
• /
• 2011

Daylighting system is an alternative to the energy crisis and environment change. And it is possible improvement system of Architectural Space Environment. Accordingly, it is very useful system. Because Daylight Duct System of Daylighting System gives high performance for its price, distribution rate is very high. But Daylighting Duct System is hard to accurate control. Accordingly, it is difficult to maintain continuously Daylight Environment in Interior Spaces. Lighting Diffusion System has been developed that it is Applying the principle of Reflector and prism diffuser for maximize the efficiency of lighting of Daylight Duct Systems through this study. And then compare lighting performance of Existing System and new Lighting Diffusion System through producing a mock-up. Thus, this study was carried out for the purpose of verification for excellence. It is that installed Each Daylighting Duct System for performance evaluation in a laboratory of width 4m, length 10m, height 2.5m. And illuminance was measured at noon on winter solstice(December 22) under clean sky. The actual measurement result was in the following. Newly developed lighting Diffusion system was measured maximum illuminance 399, minimum illuminance 221, average illuminance 141. Synthetically, daylight factor, uniformity factor and illuminance distribution were improved more than existing system. As a result, it was confirmed that was improved lighting Environment in Interior Spaces.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.16-21
• /
• 2019

In recent years, most automobile manufacturers have been using slim light source images to imprint their own brand image and identity. A light guide type lamp is widely used for making these kinds of a slim light source image. A light guide lamp means using a light emitting diode light source at one end of a long cylindrical pipe. The light from the light emitting diode source moves through the pipe by total reflection principle. Moving light is sent forward by various optic structures which is applied in the cylindrical pipe. However, the light guide lamp has a problem that the image of the light differs depending on the viewing direction, and in some cases there is dark section. It means light guide has low quality about lighting image. In this paper, trying to improve the fundamental problems of the light guide mentioned above by using various triz methods. Through functional modeling, estimating the factors affecting the light in the light guide lamp and make various ideas to improve the lighting image using the chain effect cause analysis, function oriented search scientific database techniques. Using these kinds of various TRIZ methods, finally find solutions that can improve the brightness and lighting uniformity of the light guide lamp. The ideas obtained in this paper were applied to actual vehicle development, and several patents achievements were obtained. In conclusion, it is proved that TRIZ method is useful for making ideas in actual automobile industrial field and is also a useful method for acquiring patent.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.11-12
• /
• 2012

본 논문에서는 LED(Light Emitting Diode)조명을 통해 기존 사용되는 적외선 센서로 가시광통신의 기술이 효율적으로 송 수신 가능한지 성능 분석을 하기 위한 연구이다. LED는 전기를 빛으로 바꾸는 성질을 이용하여 조명으로 활용한다. LED 조명 통신 융합 원리는 LED와 PD(Photo Diode)의 깜박임 송수신을 기본 원리로 하여 조명 기능을 유지하면서 통신에서 동시에 실현하게 가능하게 한다. LED의 기본 구조 하에 여러 IT 응용기술이 발전하게 되었고, 현재 실생활에 접하게 되었다. LED조명이 있는 곳이라면 어디서나 무선 통신을 할 수 있는 기술을 하고자, 널리 이용되고 있는 PD인 적외선 센서를 활용하여 시스템의 H/W의 초기 값을 ~1m 이상으로 하고 전체 시스템 속도 향상 시킬 수 있는 가시광 데이터 전송 시스템을 이루었다. 사용된 LED모듈이 통신에 가능한지 성능 분석을 하고, 구현된 연구의 LED 및 적외선 센서를 구성하여 예측 및 통신 거리에 대해 나타내고 응용방법과 가능성에 대해 연구하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제21권10호
• /
• pp.982-987
• /
• 2015

The inspection machine in SMT (Surface Mount Technology) line detects the assembly defects such as missing, misalignment, loosing, or tombstone. We propose a new method to classify the defect types of chip components by processing the image of PCB. Two original images are obtained from horizontal lighting and vertical lighting. The image of the component is divided into two soldering regions and one packaging region. The features are extracted by appling the PCA (Principle Component Analysis) to each region. The MLP (Multilayer Perceptron) and SVM (Support Vector Machine) are then used to classify the defect types by learning. The experimental results are presented to show the usefulness of the proposed method.