• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.81-86
• /
• 2006

In this paper, we designed the cylindrical type light source that had a electromagnetic principle of inductively coupled plasma, and measured its electrical-optical properties. Using the principle of transformer, electrically equivalent circuit of cylindrical type light source was analyzed. According to the parameters of electromagnetic induction which were diameter of coil with 0.3~1.2 mm, number of turns with 4~12 turns, distance with 40~120 mm and RF power with 10~150 W, the electrical and optical properties were measured. When diameter of coil was 0.3 mm, number of turns was 8 turns and distance was 40 mm, the highest brightness of 29,730 $cd/m^2$ was shown with RF power 150 W. The relationship between electromagnetic induction and plasma discharges was shown by mode transition from E-mode to H-mode.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2338-2356
• /
• 2019

Vehicular ad-hoc network (VANET) is the name of technology, which uses 'mobile internet' to facilitate communication between vehicles. The aim is to ensure road safety and achieve secure communication. Therefore, the reliability of this type of networks is a serious concern. The reliability of VANET is dependent upon proper communication between vehicles within a given amount of time. Therefore a new formula is introduced, the terms of the new formula correspond 1 by 1 to a class special ST route (SRORT). The new formula terms are much lesser than the Inclusion-Exclusion principle. An algorithm for the Source-to-Terminal reliability was presented, the algorithm produced Source-to-Terminal reliability or computed a Source-to-Terminal reliability expression by calculating a class of special networks of the given network. Since the architecture of this class of networks which need to be computed was comparatively trivial, the performance of the new algorithm was superior to the Inclusion-Exclusion principle. Also, we introduce a mobility metric called universal speed factor (USF) which is the extension of the existing speed factor, that suppose same speed of all vehicles at every time. The USF describes an exact relation between the relative speed of consecutive vehicles and the headway distance. The connectivity of vehicles in different mobile situations is analyzed using USF i.e., slow mobility connectivity, static connectivity, and high mobility connectivity. It is observed that $p_c$ probability of connectivity is directly proportional to the mean speed ${\mu}_{\nu}$ till specified threshold ${\mu}_{\tau}$, and decreases after ${\mu}_{\tau}$. Finally, the congested network is connected strongly as compared to the sparse network as shown in the simulation results.

• 한국지리정보학회지
• /
• 제10권4호
• /
• pp.1-13
• /
• 2007

GLCM(Gray Level Co-occurrence Matrix)의 질감 특징 정보 여섯 종류를 이용해서 위성영상을 변환한 후 두개의 주성분을 누적한 영상을 만들어 전 처리 과정을 거쳐서 모서리 검출과 영역 검출을 수행하였다. 실험 결과 두개의 주성분 변환 누적 영상의 고유 값은 94.6%로 여섯 종류 질감에 대한 대부분의 정보를 가지고 있으며, 이를 해색 한 가지 만을 이용한 적조영역 및 주성분을 모두 가지고 있는 영상의 적조영역과 비교했을 때 가장 우수한 결과를 나타내었다. 또한 적조영역과 맑은 해역에 대한 유클리디언 거리 측정으로 유클리디언 공간을 생성하고 이를 이용하여 자동으로 입력되는 원격탐사 영상의 임의 해역에 대해 적조영역을 식별하였다.

• Wind and Structures
• /
• 제32권2호
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• 소성∙가공
• /
• 제30권5호
• /
• pp.226-235
• /
• 2021

The strain aging behavior of a low carbon dual phase steel was examined in two conditions: representing room temperature strain aging (100 ℃ × 1 hr after 7.5 % prestrain) and bake hardening process (170 ℃ × 20 min after 2 % prestrain), basing on carbon effective diffusion and dislocation distribution. The first principle calculations revealed that (Mn or Cr)-vacancy-C complexes exhibit the strongest attractive interaction compared to other complexes, therefore, act as strong trapping sites for carbon. For room temperature strain aging condition, the carbon effective diffusion distance is smaller than the dislocation distance in the high dislocation density region near ferrite/martensite interfaces as well as ferrite interior considering the carbon trapping effect of the (Mn or Cr)-vacancy-C complexes, implying ineffective Cottrell atmosphere formation. Under bake hardening condition, the carbon effective diffusion distance is larger compared to the dislocation distance in both regions. Therefore, formation of the Cottrell atmosphere is relatively easy resulting in to a relatively large increase in yield strength under bake hardening condition.

• 한국IT서비스학회지
• /
• 제11권sup호
• /
• pp.103-111
• /
• 2012

In epigraph field to study ancient scripts, alternative readability improvement technologies have been developed to replace existing rubbing method which has low resolution and causes surface pollution of heritages from the viewpoints of extraction process and used materials. Recently many methods which are based on analysis of pixel data for extracting outlines of the specific image have been developed with advancement of image processing techniques. But these methods are not applicable and the results are not satisfied in the damaged inscriptions which are weathered by wind and rain for a long time and in the narrowed one. In this paper laser scanning techniques which uses optical triangulation measurement principle are developed to minimize scanning error. The proposed techniques are consisted of 3 parts：(1) the understanding of optical triangulation measurement principle to find scanning guideline (2) determinations of points interval, scanning distance and scanning angle to guarantee scanning data quality (3) identification of valid point data area which will be used in registration process. The proposed character identification method contributed in decoding an ancient inscription on SeukBingGo in Kyungju.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.407-412
• /
• 2021

Purpose: The purpose of this study was to evaluate the accuracy of virtual 3-dimensional (3D) cephalograms constructed using the principle of biplanar radiography by comparing them with cone-beam computed tomography (CBCT) images. Materials and Methods: Thirty orthodontic patients were enrolled in this study. Frontal and lateral cephalograms were obtained with the use of a head posture aligner and reconstructed into 3D cephalograms using biplanar radiography software. Thirty-four measurements representing the height, width, depth, and oblique distance were computed in 3 dimensions, and compared with the measurements from the 3D images obtained by CBCT, using the paired t-test and Bland-Altman analysis. Results: Comparison of height, width, depth, and oblique measurements showed no statistically significant differences between the measurements obtained from 3D cephalograms and those from CBCT images (P>0.05). Bland-Altman plots also showed high agreement between the 3D cephalograms and CBCT images. Conclusion: Accurate 3D cephalograms can be constructed using the principle of biplanar radiography if frontal and lateral cephalograms can be obtained with a head posture aligner. Three-dimensional cephalograms generated using biplanar radiography can replace CBCT images taken for diagnostic purposes.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.457-461
• /
• 2013

In this paper, a novel method based on geometrical optics is proposed to calculate the optical characteristics of an electric field driven liquid crystal (ELC) lens. For an optimally designed ELC lens, effective refractive index is calculated and then ray tracing is carried out using Huygens' principle. From the results, the intensity distribution at the optimum viewing distance (OVD) is obtained. To confirm the validity of our work, the result is compared with that calculated by the extended Jones matrix method (EJMM). As a result, it turns out that the novel method provides more simple and rigorous simulation results than the EJMM.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1063-1083
• /
• 2015

The main purpose of this research is to utilize simple mathematical models to depict the vibration behavior and the resulted sound field of a piezoelectric disk for ultrasonic transducers. Instead of using 1-D vibration model, coupled effect between the thickness and the radial motions was considered to be close to the real vibration behavior. Moreover, Huygens-Fresnel principle was used in both incident and reflected waves to analyze the sound field under obstacles in finite distance. Results of the tested piezoelectric disk show that, discrepancies between the simulation and experiment are 2.5% for resonant frequency and 12% for resulted sound field. Therefore, the proposed method can be used to reduce the complexity in modeling vibration problems, and increase the reliability on analyzing piezoeletric transducers in the design stage.