• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.191-201
• /
• 2004

Supply chains for agricultural commodities with their various constraints such as production lead time, seasonal production, and methods of storage are limited in the extent to which techniques like Just-in-Time (JIT) inventory management can be applied. It is beyond the ability of producers to control harvest time and many agricultural products are perishable so that they can incur exceptional losses in storage if they are not handled correctly. This is a source of additional costs and inefficiency in supply chain management. The purpose of this study is to reduce or eliminate such sources of loss and inefficiency and to identify success factors for the JIT inventory management system where it can be applied for agricultural products. Where ]IT techniques can be applied in supply chain management for agricultural products, costs such as transportation, inventory, and storage losses can be reduced with concurrent increases in efficiency. In the paper, some of the problems associated with applying ]IT inventory control methods in supply chain management for agricultural commodities will be reported through a series of case studies.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.715-723
• /
• 2004

The quantity of residuals generated from water treatment plants depends upon the raw water quality, dosage of chemicals used, performance of the treatment process, method of sludge removal, efficiency of sedimentation, and backwashing frequency. Sludge production by the physical separation of SS occurs under quiescent conditions in the primary clarifier, where suspended solids are allowed to settle and to consolidate on the clarifier bottom. Raw primary sludge results when the settled solids are hydraulically removed from the tank. The relative solid and liquid fractions of a slurry are most commonly described by the solids concentration, expressed as mg/L or percent solids. The purpose of the present investigation is to estimate a suitability on the design capacities of residuals treatment facilities by the quantity of dewatered sludge generated from water treatment plants.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.777-782
• /
• 2011

The residual treatment facilities in WTP(water treatment plant) play an important role in solid-liquid separation. At present, it is difficult to solve problems related with thickening and dewatering of WTP sludge, and discharging waste water to river. The quantity of residuals generated from water treatment plants depends upon the raw water quality, dosage of chemicals used, performance of the treatment process, method of sludge removal, efficiency of sedimentation, and backwashing frequency. Sludge production by the physical separation of SS(Suspended Solid) occurs under quiescent conditions in the primary clarifier, where SSs are allowed to settle and to consolidate on the clarifier bottom. Raw primary sludge results when the settled solids are hydraulically removed from the tank. In this study, Drawing characteristics of the sludge thickening in the thickener of Water Treatment Plants was simulated by Using CFD(Computational Fluid Dynamics.

• BMB Reports
• /
• v.56 no.2
• /
• pp.90-95
• /
• 2023

Mitochondria are important organelles that regulate adenosine triphosphate production, intracellular calcium buffering, cell survival, and apoptosis. They play therapeutic roles in injured cells via transcellular transfer through extracellular vesicles, gap junctions, and tunneling nanotubes. Astrocytes can secrete numerous factors known to promote neuronal survival, synaptic formation, and plasticity. Recent studies have demonstrated that astrocytes can transfer mitochondria to damaged neurons to enhance their viability and recovery. In this study, we observed that treatment with mitochondria isolated from rat primary astrocytes enhanced cell viability and ameliorated hydrogen peroxide-damaged neurons. Interestingly, isolated astrocytic mitochondria increased the number of cells under damaged neuronal conditions, but not under normal conditions, although the mitochondrial transfer efficiency did not differ between the two conditions. This effect was also observed after transplanting astrocytic mitochondria in a rat middle cerebral artery occlusion model. These findings suggest that mitochondria transfer therapy can be used to treat acute ischemic stroke and other diseases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.533-555
• /
• 1995

Direct-fed microbials (DFM) have been used to enhance milk production in lactating cattle and to increase feed efficiency and body weight gain in growing ruminants. Primary microorganisms that have been used as DFM for ruminants are fungal cultures including Aspergillus oryzae and Saccharomyces cerevisiae and lactic acid bacteria such as Lactobacillus or Streptococcus. Attempts have been made to determine the basic mechanisms describing beneficial effects of DFM supplements. Various modes of action for DFM have been suggested including : stimulation of ruminal microbial growth, stabilization of ruminal pH, changes in ruminal microbial fermentation pattern, increases in digestibility of nutrients ingested, greater nutrient flow to the small intestine, greater nutrient retention and alleviation of stress, however, these responses have not been observed consistently. Variations in microbial supplements, dosage level, production level and age of the animal, diet and environmental condition or various combinations of the above may partially explain the inconsistencies in response. This review summarizes production responses that have been observed under various conditions with supplemental DFM and also corresponding modification of ruminal fermentation and other changes in the gastrointestinal tract of ruminant animals.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.527-533
• /
• 2013

Polyclonal antibodies labeled with a tracer have been commonly used as secondary antibodies in immunochemical assays to quantify the concentration of antibody-antigen complexes. The majority of these antibodies conjugated with a tracer are commercially available, with the exception of few untouched targets. This study focused on the production and application of mouse anti-quail IgY as an intermediate antibody to link between quail egg yolk IgY and goat anti-mouse IgG-HRP as primary and secondary antibodies, respectively. Subsequently, the produced mouse anti-quail IgY was labeled with horseradish peroxidase (HRP) and its efficiency on enzyme linked immunosorbent assay (ELISA) was compared with that of commercial rabbit anti-chicken IgY-HRP. As an intermediate antibody, mouse anti-quail IgY was successfully produced with good affinity and sensitivity (1:10,000) to the primary and secondary antibodies. Subsequently, mouse anti-quail IgY was effectively conjugated with HRP enzyme, resulting in a secondary antibody with good sensitivity (1:10,000) to quail anti-V. parahaemolyticus and V. vulnificus IgY. The detection limit was $10^5$ CFU/ml for both V. parahaemolyticus and V. vulnificus. The efficiency of the produced conjugate to detect quail IgY on ELISA was comparable to that of the commercial rabbit anti-chicken IgY-HRP, and hence the produced and labeled mouse anti-quail IgY-HRP can be used as a secondary antibody to detect any antibody produced in quail.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.49-59
• /
• 2008

The effects of design parameters on the pellet transport rate in the ejector system which is widely used in the production processes of automotive parts were investigated experimentally. The primary nozzle geometry, the area ratio (R) of nozzle exit cross-sectional area to mixing chamber cross-sectional area and the distance (S) from primary nozzle exit to mixing chamber entrance were considered as the design parameters. The area ratios of the primary nozzle were varied from R=0.10 to R=0.25, 0.30, 0.40 and 0.55. The primary nozzle was positioned at the non-dimensional distance (S/D) of 1.30, 1.87, 2.44, 3.00 and 3.75, normalized using the mixing chamber diameter (D). The design parameters were determined to run with high efficiency by measuring the pellets transport rate. The geometry and the area ratio (R) of the primary nozzle had an effect on the pellet transport rate of the ejector system, and the area ratio of R=0.3 was carefully selected after taking the minimum fluidization velocity and transport rate of applied pellets into account. The higher pellet transport rate with the variation of the distance (S/D) was observed at S/D of 2.44.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.553-564
• /
• 2018

Water use efficiency (WUE) is the amount of carbon uptake per unit of water use, which is a key measure of the functions of terrestrial ecosystems, as it is related to both the hydrologic and carbon cycles. Furthermore, it can vary with many factors, such as climate conditions and land cover characteristics, in different regions. In this study, we aim to understand the spatial and temporal variations in WUE on the Korean Peninsula as well as the associated response to drought. The Moderate Resolution Imaging Spectroradiometer (MODIS)-derived gross primary productivity (GPP) and evapotranspiration (ET) datasets and climate data were used to derive a drought index. Based on the monthly WUE, we found that WUE decreased during the monsoon summer in all regions and for all vegetation types. Furthermore, the annual WUE was negatively correlated with the drought index, with increasing correlation coefficients from the northern region to the southern region of the Korean Peninsula.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1635-1648
• /
• 2022

Thermal stress due to extreme changes in the thermal environment is a critical issue in cattle production. Many previous findings have shown a decrease in feed intake, milk yield, growth rate, and reproductive efficiency of cattle when subjected to thermal stress. Therefore, selecting thermo-tolerant animals is the primary goal of the efficiency of breeding programs to reduce those adverse impacts. The recent advances in molecular genetics have provided significant breeding advantages that allow the identification of molecular markers in both beef and dairy cattle breeding, including marker-assisted selection (MAS) as a tool in selecting superior thermo-tolerant animals. Single-nucleotide polymorphisms (SNPs), which can be detected by DNA sequencing, are desirable DNA markers for MAS due to their abundance in the genome's coding and non-coding regions. Many SNPs in some genes (e.g., HSP70, HSP90, HSF1, EIF2AK4, HSBP1, HSPB8, HSPB7, MYO1A, and ATP1A1) in various breeds of cattle have been analyzed to play key roles in many cellular activities during thermal stress and protecting cells against stress, making them potential candidate genes for molecular markers of thermotolerance. This review highlights the associations of SNPs within these genes with thermotolerance traits (e.g., blood biochemistry and physiological responses) and suggests their potential use as MAS in thermotolerant cattle breeding.

• The Korean Journal of Ecology
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1985

Biomass, carbon, nitrogen and phosphorus standing crops of bethic community were estimated at the trophic levels in the intertidal zone of Kum river estuary. Annual mean biomass of zoobenthos was 130.5g/$m^2$, body fraction 26.7g/$m^2$ and shell fraction 103.8 g/$m^3$. Biomass estimated as ash-free dry weight was total 28.9g/$m^2$, body fraction 20.2g/$m^2$ and shell fraction 8.7g/$m^2$ Carbon standing crops of zoobenthos were 15.9gC/$m^2$, in which organic carbon content was 7.0gC/$m^2$ and carbonate carbon was 8.9gC/$m^2$. Production efficiency by carbon standing crops from sediment to herbivores and carnivores and 10.6% and 16.0% in phosphorus, respectively. Annual primary production of benthic algae was crudely estimated to 329g.dw/$m^2$/yr by using the biomass and turn-over rate of benthic algae.