• 제목/요약/키워드: Primary mineral

검색결과 221건 처리시간 0.028초

Effects of Cement Type and Fly Ash on the Sulfate Attack Using ASTM C 1012

  • 안남식
    • 콘크리트학회논문집
    • /
    • 제16권1호
    • /
    • pp.130-138
    • /
    • 2004
  • The primary factors that affecting concrete sulfate resistance are the chemistry of the Portland cement and the chemistryandreplacementlevelofmineraladmixtures. In order to investigate the effect of those on the sulfate attack the testing program involved the testing of several different mortar mixes using the standardized test, ASTM C 1012. four different cements were evaluated including one Type I cement, two Type I-II cements, and one Type V cement. Mortar mixes were also made with mineral admixtures as each cement was combined with three different types of mineral admixtures. One Class F fly ash and one Class C fly ash was added in various percent volumetric replacement levels. The expansion measurements of mortar bars were taken and compared with expansion criteria recommended from past experience to investigate the effect of each factor.

변압기 층간 절연지의 열열화 특성 평가에 관한 연구 (The Study on Characteristics for Thermal Aging of the Layer Insulation in Transformers)

  • 이병성;송일근;김동명;박동배;한상옥
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.406-409
    • /
    • 2002
  • The primary insulation system used in an oil-filled transformer is Kraft paper, wood, porcelain and, of course, oil. Modern transformers use paper that is chemically treated to improve its tensile strength properties and resistance to aging caused by immersion in oil. These insulation papers are mainly aged to thermal stress. Over the course of the insulation paper and oil's life it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper using the layer insulation. We made two aging cell in which thermal aging tests of insulation papers and mineral oil are conducted. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

  • PDF

서울대학교 관악캠퍼스 지역에서의 실내 라돈농도 분포 (Indoor Radon Levels in the Room of Kwanak Campus, Seoul National University)

  • 제현국;강치구;전효택
    • 자원환경지질
    • /
    • 제31권5호
    • /
    • pp.425-430
    • /
    • 1998
  • The results of radon $(^{222}Rn)$ concentrations and working levels (WL) for forty rooms in Kwanak Campus, Seoul National University on granite bedrock of Jurassic age showed that radon concentration have mean value of 3.0 pCi/L and 0.011 for working level. A number of rooms where these values exceed the EPA's action level are five (13%). It was also suggested that indoor basement rooms in poor ventilation condition can be classified as extremely high radon risk zone having more than 4 pCi/L and 0.020 WL. It was proved that inflow of soil-gas was a primary factor that governs indoor radon level by comparison of soil-gas radon concentrations with indoor radon concentrations.

  • PDF

구룡광산 광미층의 심도변화에 따른 물리.화학적 및 광물학적 특성 (Physio-chemical and Mineralogical Characterization of the Tailings in the Guryoung Mining Area)

  • 문용희;김정연;송윤구;문희수
    • 자원환경지질
    • /
    • 제41권2호
    • /
    • pp.183-199
    • /
    • 2008
  • 본 연구에서는 구룡광산에 적치된 광미층으로 부터 채취된 대표 비교란 코어시료를 대상으로 체계적인 물리 화학적 및 광물학적 특성을 심도별로 정량적으로 파악, 중금속 거동 핵심 영향요소를 기준으로 광미층 수직분대를 시도하고, 이를 기초로 광미층 비포화대-포화대에 걸친 원소 거동과 지화학적 조건과의 상관모델을 제시하고자 한다. 구룡광산의 대상 광미층은 화학적으로 지하수면을 경계로 상부층 구간에서의 낮은 pH(4)와 20wt.% 이상의 높은 $Fe_2O_3$$SO_3$ 함량에 의해 특징지어진다. 물리 화학적 및 광물학적 분석 자료를 고려하여 구룡광산 광미층을 심도증가에 따라 복토층, jarosite zone, Fe-sulfate zone, Fe-oxyhydroxide zone, gypsum-bearing pyrite zone, calcite-bearing pyrite zone, soil zone(광미층 집적 이전 토양층), weathered zone 등 7개분대로 구분할 수 있으며, 새로 생성된 이차광물상의 특성을 고려할 때 지하수면을 기준으로 상부층을 산화대(oxidation zone)로, 하부층을 비산화대(unoxidation zone), 혹은 carbonate-rich primary zone으로 크게 대분할 수 있다. 본 연구결과를 기초로 구룡광산 광미층의 물리 화학적 및 광물학적 변화를 지하수면 상부층에서의 황화광물, 특히 황철석의 산화반응이 핵심요소가 되어, 이로 인한 pH 값의 감소, 일차광물의 용해반응 및 원소 용출, 이차광물상 생성, 그리고 생성된 산의 탄산염 및 규산염광물에 의한 산-중화반응 등 일련의 지화학적 반응으로 설명할 수 있다.

반응성 결정화에 의한 네오디뮴 옥살레이트 특성 고찰 (A Study on the Characterization of Neodymium Oxalate by Reaction Crystallization)

  • 윤호성;김철주;김준수
    • 자원리싸이클링
    • /
    • 제13권5호
    • /
    • pp.37-44
    • /
    • 2004
  • 본 연구에서는 NdFeB 영구자적 스크랩을 산침출처리하여 제조한 염화네오디뮴 수용액에 옥살산 수용액을 투입하여 반응성 결정화에 의한 네오디뮴 옥살레이트를 합성 시, 반응조건이 네오디뮴 옥살레이트에 미치는 영향을 고찰하였다. 네오디뮴 옥살레이트는 핵 생성을 통하여 형성된 1차 입자들의 응집체 형태를 가지고 있으며, 응집된 평균입자 크기는 반응조건에 영향을 받았다. 일정한 용액 부피에서 반응물의 농도 증가는 핵생성을 통하여 형성되는 1차 입자의 크기는 감소시키나 입자들의 수를 증가시키며, 따라서 1차 입자들의 충돌에 의하여 형성되는 응집체의 크기를 증가시켰다. 일정한 반응물 농도에서 교반속도가 증가함에 따라 응집체 표면에 붙어있던 결정입자들이 떨어지기 때문에 최종 응집체의 크기는 감소하였다. 반응온도 증가에 따라 핵생성속도가 감소하고, 1차 입자 수의 감소는 입자들의 충돌 확률을 감소시키며 따라서 응집체의 평균 크기가 감소하였다. 네오디뮴 옥살레이트의 열분해 거동 고찰 결과, $400^{\circ}C$ 이사에서 옥살레이트의 분해가 일어나며 $620^{\circ}C$에서 네오디뮴 옥살레이트가 산화네오디뮴으로 결정화되었다.

황해 표층퇴적물의 점토광물 분포; 절대광물조성과 상대광물조성 (Clay Mineral Distribution in the Yellow Sea Surface Sediments: Absolute Mineral Composition and Relative Mineral Composition)

  • 문동혁;이희일;신동혁;신경훈;조현구
    • 한국광물학회지
    • /
    • 제21권3호
    • /
    • pp.289-295
    • /
    • 2008
  • 해양퇴적물 전체 시료 내에 존재하는 각 점토광물의 함량비(전대광물조성)와 점토광물들만을 100%로 환산했을 때 각 점토광물의 함량비(상대광물조성)를 구한 후, 지도에 도시하여 그 분포 양상을 비교하여 보았다. 시료는 한국해양연구원의 2001년 황해 2차 탐사에서 채취된 86개 표층 퇴적물 시료를 사용하였으며, 정량X선회절분석법을 이용하여 광물조성을 구하였다. 황해 표층 퇴적물은 주구성광물(석영 평균 44.7%, 사장석 15.9%, 알카리장석 13.9%. 각섬석 2.8%), 점토광물(일라이트 15.3%, 녹니석 2.6%, 카올리나이트 1%), 탄산염광물(방해석 1.7%, 아라고나이트 0.6%) 등으로 구성되어 있다. 점토광물들은 대체로 황해의 가장자리에 적은 분포를 보이고 산동반도 남동쪽에서 제주도 남서쪽을 연결하는 해역에서 높았으며, 세립질 퇴적물의 분포와 거의 일치하는 경향을 나타낸다. 점토광물들의 합을 100으로 가정하고 구한 점토광물의 평균 상대광물조성은 일라이트, 녹니석, 카올리나이트가 각각 80.3%, 14.9%, 4.8%이다. 점토광물들의 상대광물조성을 이용하여 나타낸 분포 양상은 절대광물 조성을 이용하여 구한 그것과 많은 차이를 보이며, 점토광물을 많이 포함하고 있는 세립질 퇴적물의 분포경향과도 정의 상관관계를 보이지 않는다. 그러므로 점토광물들만을 대상으로 상대광물조성을 구하여 퇴적물 근원지 해석 등에 이용할 때에는 상당히 신중을 기한 필요가 있는 것으로 판단된다.

New discoveries, skarn zonation, and skarn textures at the Geodo Mine in the Taebaeksan Basin, South Korea

  • Kim, Eui-Jun;Yang, Seok-Jun;Shin, Seungwook;Nam, Hyeong-Tae;Shin, Dongbok;Im, Heon-Kyoung;Oh, Il-Hwan;No, Sang-Gun;Cho, Sung-Jun;Park, Maeng-Eon
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.881-889
    • /
    • 2018
  • The Geodo skarn deposit is located in the Taebaeksan Basin, central eastern Korean Peninsula. The geology of the deposit consists of Cambrian to Ordovician calcareous sedimentary rocks and the Cretaceous Eopyeong granitoids. The skarns at Geodo occur around the Eopyeong granitoids, which consist, from early to late, of magnetite-bearing equigranular quartz monzodiorite, granodiorite, and dykes. These dykes emanated randomly from equigranular granodiorite and some of dykes spatially accompany skarns. Skarn Fe mineralization, referred as Prospect I and II in this study, is newly discovered beyond previously known skarns adjacent to the quartz monzodiorite. These discoveries show a vertical and lateral variation of skarn facies, grading from massive reddish-brown garnet-quartz in a lower and proximal zone to banded in an upper and distal zone, reflecting changes in lithofacies of the host rocks. Skarn veins in distal locations are parallel to sedimentary laminae, suggesting that lithologic control is important although proximal skarn has totally obliterated primary structures, due to intense retrograde alteration. Skarns at Geodo are systematically zoned relative to the causative dykes. Skarn zonation comprises proximal garnet, distal pyroxene, and vesuvianite (only in Prospect I) at the contact between skarn and marble. Retrograde alteration is intensely developed adjacent to the contact with dykes and occurs as modification of the pre-existing assemblages and progressive destruction such as brecciation of the prograde assemblages. The retrograde alteration assemblages consist predominantly of epidote, K-feldspar, amphibole, chlorite, and calcite. Most of the magnetite (the main ore mineral), replaces calc-silicate minerals such as garnet in the lower proximal exoskarn, whereas it occurs massive in distal pyroxene and amphibole in the upper and distal exoskarn. The emanation of dykes from the equigranular granodiorite has provided channelways for ascent of skarn-forming fluids from a deep source, whereas the style and nature of skarns suggest that originally structurally-controlled skarn-forming fluids may migrate long distances laterally to produce skarn in calcareous sedimentary rocks.

폐 커피 캡슐의 재활용을 위한 재질분리 공정 개발 (Development of Material Separation Process for Recycling Waste Coffee Capsules)

  • 백상호;한요셉;김성민;;전호석
    • 자원리싸이클링
    • /
    • 제30권3호
    • /
    • pp.70-81
    • /
    • 2021
  • 본 연구에서는 현재 생활계 폐기물로 폐기되는 커피 캡슐의 재질분리 공정 개발을 통해 폐플라스틱의 재활용 가능성을 평가하였다. 1차 파쇄, 세척 및 체질을 통해 커피찌꺼기를 제거하고 2차 파쇄 후, 총 3번의 코로나 방전형 정전선별을 수행하는 재질분리 공정이 개발되었다. 이때, -10 mm 시료는 최적조건에서 알루미늄 제거율과 플라스틱 회수율이 각각 95.4%와 98.3% 이었으며, -15 mm는 각각 91.3%와 97.2% 이었다. 재질분리 된 폐플라스틱의 재활용 가능성을 평가하기 위하여, 시료를 펠릿으로 제조하고 물성을 분석하였다. 분석결과, 유해물질은 검출되지 않았으며, Homo-PP와 유사한 결과를 보였다. 따라서 재생 PP로 충분한 기능성이 존재하는 것을 확인하였다. 다만, 어두운 색상으로 인해 검정 혹은 어두운 계열의 제품군에 한정적으로 적용 가능할 것으로 평가되었다.

Mineral trioxide aggregate가 유치 및 영구치의 치수기질세포 증식 및 분화에 미치는 영향 (Effects of Mineral Trioxide Aggregate on the Proliferation and Differentiation of Human Dental Pulp Stromal Cells from Permanent and Deciduous Teeth)

  • 김승혜;전미정;신동민;이제호;송제선
    • 대한소아치과학회지
    • /
    • 제40권3호
    • /
    • pp.185-193
    • /
    • 2013
  • 최근 유구치의 치수절단술 약제로 MTA의 임상 적용이 문헌들에서 보고된 바 있으나 MTA 표면에서 일어나는 유치 치수 세포의 반응에 대한 시험관내 연구는 많이 보고되지 않았다. 이번 연구의 목적은 유치 및 영구치에서 유래한 치수기질세포가 경화된 MTA 표면에서 나타내는 증식 및 분화 능력을 비교 평가하는 것이었다. 사람 영구치와 유치 치수 조직에서 분리된 치수기질세포를 경화된 MTA 표면에서 배양 후 세포증식율과 세포주기를 검사하였으며, 정량적 역전사 중합효소 연쇄반응(RT-PCR)을 사용하여 분화양상을 분석하였다. Runt-related transcription factor 2(Runx2)와 alkaline phosphatase(ALP)가 정량적 RT-PCR의 표지자로 사용되었고, MTA 표면에서 증식된 치수기질세포의 형태학적 변화를 주사전자현미경 하에서 관찰하였다. 영구치와 유치의 치수기질세포군은 세포증식률, 세포주기 분포 및 mRNA 발현 양상에 있어서 차이를 보이지 않았으며, 주사전자현미경 상에서 두 군 모두 수지상 형태를 나타내었다. MTA 상에서 관찰된 유치와 영구치의 치수기질세포의 비슷한 증식력 및 광화를 유도하는 세포로의 분화능은 유치의 치수절단술 제재로 MTA가 생체친화적으로 적합함을 보여준다.

솔-젤 공정(工程)을 이용(利用)하여 제조(製造)된 YAG($Y_{3}Al_{5}O_{12}$) 분말 입형제어 (Control of YAG($Y_{3}Al_{5]O_{12}$) Particle Shape prepared by Sol-Gel Process)

  • 박진태;김철주;윤호성;손정수
    • 자원리싸이클링
    • /
    • 제17권5호
    • /
    • pp.52-59
    • /
    • 2008
  • 본 연구에서 적용한 솔-젤 공정은 반응 초기에 금속 이온들과 구연산의 킬레이트화 반응에 의하여 진행되었다. 솔젤과 열처리 과정을 거쳐 얻은 젤 분말의 열분석 결과, YAG를 얻기 위한 젤 분말의 소성온도는 $900^{\circ}C$ 이상 되어야 하며 소성온도가 증가함에 따라 생성되는 YAG의 결정도가 향상되었다. 솔-젤 반응 시 구연산을 사용하여 얻은 젤 분말을 소성시켜 얻은 YAG는 불규칙한 다공성 구조를 가진 조각들로 구성되었으며, YAG 입자크기 조절을 위하여 유기첨가물의 영향을 고찰하였다. 유기산 보조제인 에틸렌 글리콜은 솔-젤 반응 초기에 구연산과 중합반응을 통하여 그물 망상구조를 형성하여 용액 내 금속이온들의 반응영역을 효과적으로 분리시켜 YAG를 미세화 시켰으며, 계면활성제인 Igepal 630은 에멀젼에 의한 용액 내 방울(droplet)을 형성하여 YAG 응집체를 구성하는 입자들의 크기를 증가시켰다. 그러나 YAG형태는 크게 개선되지 않았기 때문에 젤 분말로부터 균일한 YAG를 제조하기 위하여, 응집체 크기 감소와 균질 크기를 갖도록 젤 분말을 건식분쇄 하였다. 이러한 결과로부터 솔-젤 반응을 거쳐 얻은 젤 분말을 소성 전에 분쇄하는 것은 최종 YAG산화물의 입도제어에 아주 중요한 공정임을 알 수 있었다.