• Journal of Periodontal and Implant Science
• /
• v.46 no.2
• /
• pp.116-127
• /
• 2016

Purpose: The objective of this study was to investigate the relationships between primary implant stability as measured by impact response frequency and the structural parameters of trabecular bone using cone-beam computed tomography(CBCT), excluding the effect of cortical bone thickness. Methods: We measured the impact response of a dental implant placed into swine bone specimens composed of only trabecular bone without the cortical bone layer using an inductive sensor. The peak frequency of the impact response spectrum was determined as an implant stability criterion (SPF). The 3D microstructural parameters were calculated from CT images of the bone specimens obtained using both micro-CT and CBCT. Results: SPF had significant positive correlations with trabecular bone structural parameters (BV/TV, BV, BS, BSD, Tb.Th, Tb.N, FD, and BS/BV) (P<0.01) while SPF demonstrated significant negative correlations with other microstructural parameters (Tb.Sp, Tb.Pf, and SMI) using micro-CT and CBCT (P<0.01). Conclusions: There was an increase in implant stability prediction by combining BV/TV and SMI in the stepwise forward regression analysis. Bone with high volume density and low surface density shows high implant stability. Well-connected thick bone with small marrow spaces also shows high implant stability. The combination of bone density and architectural parameters measured using CBCT can predict the implant stability more accurately than the density alone in clinical diagnoses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2017

Absolute nodal coordinate formulation was developed in the mid-1990s, and is used in the flexible dynamic analysis. In the process of deriving the equation of motion, if the order of polynomial referring to the displacement field increases, then the degrees of freedom increase, as well as the analysis time increases. Therefore, in this study, the primary objective was to reduce the analysis time by transforming the dimensional equation of motion to a non-dimensional equation of motion. After the shape function was rearranged to be non-dimensional and the nodal coordinate was rearranged to be in length dimension, the non-dimensional mass matrix, stiffness matrix, and conservative force was derived from the non-dimensional variables. The verification and efficiency of this non-dimensional equation of motion was performed using two examples; cantilever beam which has the exact solution about static deflection and flexible pendulum.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.2
• /
• pp.123-132
• /
• 1991

The purpose of this study was to Investigate the effects of bent - up bar Within beam - column 1lint core with High - Strength Concrete up to 800kg/$cm^2$. To achieve these objectives, 5 specimens were designed and tested under monotoric loading and reversed cyclic loadings. The primary variables were the number of bent-up bars, compressive strength of concrete and loading patterns. The results showed that the load capacity of specimen subjected to monotonic loading had more large than that of specirnn subjected to reversed cyclic loadings and the bent - up bar within joint core could prevented the crack at the joint face from propagating into the pint core but the failure was concentrated at the face of beam - column pint. Thus the study on flexural strength ratio should be accomplished before using bent - up bars within the joint core.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.363-367
• /
• 1993

A retrospective analysis was peformed on 42 patients with carcinoma of the uterine cervix who were treated with external beam (EB) radiation therapy alone at the Department of Therapeutic Radiology, Seoul National University Hospital from March 1979 to December 1988. After whole pelvic field irradiation of 50Gy, all the patients received additional booster dose of 12-22Gy to the primary tumor Thirty one received EB radiotherapy alone because of poor geometry for intracavitary application,5 because of medical problems and 6 because of other reasons. Five year locoregional control rate and five year survival rate were $34.5\%\;and\;35.4\%,$ respectively. Five year survivals were $66.7\%,\;36.4%,\;32.8\%\;and\;25.0\%$ for stage IIA, IIB, IIIB and IVA, respectively. The response one month after treatment well correlated with prognosis. The incidence of grade 2 and 3 complication was $12\%\;and\;10\%,$ respectively. There was tendency of increased complication with advanced stage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1037-1054
• /
• 2014

In this study, the status of coastal fisheries was examined based on the catch and number of fishing vessels of coastal fisheries in Korea. Comparing the status on coastal fisheries of the East Sea, Yellow Sea and South Sea in Korea, scientific evidence was made for fisheries management on coastal fisheries based on characteristics of each sea area. From 1990 to 2011, the catch of coastal fisheries in Korean waters ranged from 150,000 mt to 230,000 mt, with an average of 190,000 mt, and it accounted for 15% in average of total catch fished in adjacent waters of Korea. In order of catch by coastal fisheries, gillnet (36.7%) was the primary fishery, followed by coastal complex (24.7%), stow net (18.3%), trap (12.9%), lift net (3.9%), purse seine (3.0%) and beam trawl (0.4%) fisheries. In order of catch by species, anchovy (15.0%) had the largest proportion of total catch, followed by common squid (10.3%), akiami paste shrimp (5.2%), blue crab (3.9%) and octopus (3.7%). Of the average catch by sea area from 1990 to 2011, Yellow Sea, South Sea and East Sea were 37.4%, 34.6% and 28.0%, respectively. Since 2000s, however, the average catch of South Sea has accounted for the largest proportion. The number of permitted fishing vessels involved in 8 coastal fisheries was 55,336 vessels in average from 1997 to 2011. The number of vessels was about 47,000 vessels in 1997, and increased to 61,300 vessels until 2000, then has decreased to 44,000 vessels operating in 2011. In order of the number of permitted fishing vessels by fisheries, complex (52.4%) took the first place, followed by gillnet (31.5%), trap (13.4%), stow net (0.8%), beam trawl (0.8%), purse seine (0.6%), lift net (0.4%) and seine net (0.0%). In order of the number of permitted fishing vessels by sea area, South Sea (29,994 vessels) took the first place, followed by Yellow Sea (18,185 vessels) and East Sea (7,158 vessels). In order of the catch per unit effort (CPUE, mt/vessels) which was analyzed using catch and number of vessels in average by fishery, stow net is the highest followed by lift net, trap, purse seine, gill net, beam trawl and complex fisheries. In particular, the CPUE of complex and gill net fisheries, which accounted for the largest number of vessels were 4.0 mt/vessels and 1.6 mt/vessels, respectively. Since those are too low relative to other fisheries, it was judged to need systematical management on both fisheries.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.127-132
• /
• 2001

We describe the pulse forming of pulsed $CO_2$laser using multi-pulse superposition technique. A various pulse length, high duty cycle pulse forming network(PFN) is constructed by time sequence. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on SCRs of three PFN modules consecutively at a desirable delay time with the aid of PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a High voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage and drive the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence. We investigated laser pulse shape and duration as various trigger time intervals of SCRs among three PFN modules. As a result, we can obtain laser beam with various pulse shapes and durations from about 250 $mutextrm{s}$ to 600 $mutextrm{s}$.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.97-102
• /
• 2011

The characteristics of traditional Thai houses are post-and-beam structure, lifted floor on pillars, and gabled roof as like as houses in other Southeast Asia countries. However 'charn', connective terrace among each room, is the most unique element in Thai houses which make the area under the 'charn' cool and useful. In Thailand, there are number of housing types caused by historic, social, cultural and geographic factors. This research is focused on comparative study of planning of traditional Thai houses of central and northern region, which have the biggest differences in between. Thai traditional house in central region has symmetrical arrangement on layout and when family members are added, they extend 'charn' and attach another building. While in Northern region, the 'charn' is located not in the center and in the front, and the direction of the main building is perpendicular to the length direction of the veranda. This research has a limitation to be generalized because just two region in Thailand were analyzed and the numbers of case studies were few. Nevertheless, we expect this paper to be a primary guidance to understand Thai traditional houses and we also expect that our research area will cover the all areas in Thailand and finally expand to conclude the commonality and diversity of traditional houses in Southeast Asia in the future.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.19-29
• /
• 2010

Vernacular houses in Southeast Asia are basically post and beam structures raised on pillars, with gabled roofs. They were designed and built by the people themselves to meet specific needs, accommodating the values, economies and ways of life of cultures that produce them. Their forms and housing cultures are very various according to the country and the region. But based on the common history and culture, the vernacular houses in Southeast definitely have commonality. The purpose of this study is to analyse the commonality and diversity of the vernacular houses in Southeast Asia in the aspect of two different perspectives. One is the climate perspective, for which the analysis was made on the primary characteristics such as the climate, material, structure of the vernacular houses. The other one is the social-cultural perspective which try to find the religion, belief, life style and social and family relationship which controlled the forms of the housing under the surface. As a result, this study summarise and find the outstanding and unique meaning and definition of the vernacular houses in Southeast Asia.

• Journal of Oral Medicine and Pain
• /
• v.39 no.1
• /
• pp.22-25
• /
• 2014

Synovial chondromatosis (SC) in temporomandibular joint is a rare benign disorder characterized by cartilaginous metaplasia of the mesenchymal remnants of the synovial tissue. The etiology of the disease is unclear but may be associated with trauma, overuse, local infection, and embryologic disturbance. SC does not spontaneously resolve and respond to nonsurgical treatment. SC should be differentially diagnosed with other temporomandibular joint disorders such as arthralgia or osteoarthritis because surgery should be done for managing it. However, primary diagnosis of SC is not easy because of nonspecific symptoms and signs. For the patients with unsuccessful conservative treatment response, especially accompanied by crepitus, preauricular swelling or posterior open bite, computed tomography/cone-beam computed tomography or magnetic resonance imaging should to be performed to exclude SC. We discussed the importance of the early diagnosis and surgical treatment of SC from this case.