• Asian Pacific Journal of Cancer Prevention
• /
• 제16권8호
• /
• pp.3533-3538
• /
• 2015

Background: Multiple primary malignancies (MPM) have become increasingly prevalent worldwide. This investigation was aimed at establishing the clinicopathological characteristics of MPM patients and evaluating the impact of the living environment on MPM in the Taiwanese population. Materials and Methods: From January 2009 to December 2013, a total of 8,268 cancer patients were identified in our institutional center. Of these, 125 were diagnosed as MPM and thus enrolled. Data for clinicopathological features and treatment approaches for these MPM patients living in urban or suburb zone were obtained. Findings for the air pollution status in Taiwan were also collected. Results: The most common cancer match of MPM was esophageal cancer with hypopharyngeal cancer (12.8%), followed by colorectal cancer with gastric cancer (6.4%) and colorectal cancer with breast cancer (5.6%). The air quality was significantly worse in the urban than in the suburban zone and there was a remarkably higher portion of MPM patients in the urban zone suffering from grade III and IV post-chemotherapeutic neutropenia (30.8% vs 15.1%, P=0.036). Conclusions: The tumor frequency and site distribution should be taken into the clinical evaluation because there is a relatively high risk of developing MPM. This study also highlighted the potential influence of environmental factors on post-chemotherapeutic neutropenia for patients with MPM.

• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.37-55
• /
• 1989

The tissue reactions concerned in alveolar bone remodelling at the pressure zones of rat molar periodontium associated with the application of force (15 gm) to the maxillary first molar teeth of the albino rats were studied by the transmission electron microscopy. Osteoclasts referrable to bone resorption were observed thereafter 3 hour survival period and undermining resorption was generated thenceforth 2 day survival period. Bone resorption, reversal zone and new bone formation were simultaneously observed adjacent to the zone of undermining resorption in the 7 day survival period. Osteoclasts with well developed primary lysosome, ruffled border, clear zone, granules and Golgi apparatus were detected at the zone of the bone resorption, and dark and bright cells adjacent to the osteoclasts as well. Mononuclear cells and perpendicularly arranged collagenous fibers were observed in the reversal zone and, on the other hand, osteoblasts with well developed Golgi apparatus and rough endoplasmic reticulum were detected at the zone of bone formation.

• Computers and Concrete
• /
• 제21권1호
• /
• pp.75-85
• /
• 2018

To improve the design equation for the evaluation of the bursting force in the post-tensioned anchorage zone, this paper presents the analyses and design of the post-tensioned (PT) anchorage zone on the basis of three dimensional (3D) finite element (FE) analyses. The structural behavior was investigated through linear elastic finite element analyses upon consideration of the change in design parameters such as the bearing plate size, the eccentricity, and the tendon inclination. Moreover, consideration of the duct hole, which causes an increase of the bursting stress with a change in its distribution along the anchorage zone as well, is emphasized. Since that an exact prediction of the bursting force is the primary interest in design practice, additional parametric analyses are carried out to evaluate the relative contribution of all design parameters in determining the bursting force, and a comparison with the design guidelines mentioned in AASHTO-LRFD has been provided. Finally, an improved design guideline that takes into account the influence by the duct hole is suggested.

• 자원환경지질
• /
• 제49권3호
• /
• pp.193-199
• /
• 2016

콘스탄시아 광산은 페루 남동부 안다우아이라스-야우리 Cu-Mo-Au 광화대 내에 발달하는 광상으로서, 구조적으로는 아방까이 변형대의 남서쪽에 위치하며 반암동광형태로 부존한다. 콘스탄시아 광산의 광화대는 상부로부터 용탈대, 2차부화대(약 1% Cu), 혼합대, 초생광화대(약 0.5%), 스카른대(약 1.5% Cu)로 구성되어 있다. 주요 모암은 몬조니 반암이다. 용탈대는 갈철석 침전이 특징적이며 노두상에서는 갈색으로 보인다. 스카른대는 자철석과 석류석의 산출이 특징적이다. 현재 콘스탄시아 광산은 캐나다의 Hudbay사가 100% 지분을 보유하고 있으며, 2015년 1월부터 상용생산을 시작하였다.

• Journal of Gastric Cancer
• /
• 제9권2호
• /
• pp.63-67
• /
• 2009

비장 변연부 림프종(Splenic marginal zone lymphoma)은 드문 종양이며, 주로 노년층에서 발견되며, 절반 이상이 10년 이상 생존할 만큼 양호한 경과를 보인다. 본원에서는 이전에 보고된 바가 없는 비장 변연부 림프종과 조기위암이 동시에 발견된 환자의 수술적 치료를 경험하였기에 보고하는 바이다. 74 세 남자환자로 5년 전 알코올성 간경화를 진단 받은 이후 추적관찰 중 시행한 위내시경 검사에서 유문부에 조기위암이 발견되었다. 복부 전산화 단층 촬영 결과, 경미한 간경화와 비장비대, 복강 내 림프절병증이 관찰되었고, 근치적 절제를 위해 위 아전절제술을 시행하였다. 수술 당시 경미한 간경화와 비장이 매우 커져 있는 것과 더불어 다수의 복부 림프절비대가 관찰되었다. 이후 조직 검사 결과에서 조기위암과 림프절에서 비장 변연부 B 세포 림프종으로 진단되었다. 환자는 회복 후 골수검사와 PET 검사 등을 시행하였으며, 조직검사와 같은 결과를 얻었다. 이후 환자는 항암치료 계획 중이다. 비장 변연부 림프종은 Schmid 등에 의해 처음 명명되었으며, 비호치킨성 림프종의 1~2%를 차지한다. 이는 진단 당시 평균 나이가 65세이고, 드문 질환이지만 완만한 경과로 긴 생존 기간을 가지므로 추가로 악성종양이 발생될 수 있다. 대부분 진단 당시 무증상이며, 심각한 혈구 감소증이 없거나, 중등도의 비장비대를 동반한 무증상의 환자는 경과를 관찰하는 것이 타당하다. 본 환자는, 조기 위암 수술 중 발견되어 비장 변연부 림프종으로 진단된 경우로, 동시에 발견된 경우는 보고된 바가 없다. 드물기는 하지만, 비장 변연부 림프종을 가진 환자의 주의 깊은 추적 관찰로 이차로 발생되는 악성 종양을 조기에 발견하는 것이 중요하다.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.81-85
• /
• 2011

The end effect of a linear induction motor (LIM) has been known for several decades, especially in high speed operation. The exit part of the primary is not dealt as extensively as the entry part because of its minor effect. However, the exit part is one of the keys to weaken the dolphin effect, which occurs in high speed operation. In this paper, the concept of the virtual primary core is introduced, and chamfering of the primary outlet teeth is proposed to minimize the longitudinal end effect at the exit zone. For this, LIM for the high-speed train is designed and analyzed by using finite element method. Results confirm that chamfering can improve thrust performance effectively.

• 한국주거학회논문집
• /
• 제26권1호
• /
• pp.53-60
• /
• 2015

Community is crucial for human beings not only because they are born with communal self but also because social cooperation is more efficient than competition in many cases. Human beings are defined as Homo communicus living in residential community which is important for the fulfillment of their primary needs. Residential community is an 'intimacy zone' where personal and emotional interactions are made. This study aims at examining the health of residential community in Korea by exploring the level of place attachment and neighborhood trust. Previous studies indicate that place attachment and trust are influenced by three dimensions such as residents' characteristics, house types and regional environment. This study conducted a nationwide questionnaire survey and it shows that place attachment moulds neighborhood trust. The results of path analysis demonstrates that place attachment and trust appear high in detached house areas. Age of residents also gives positive influence on the level of place attachment and neighbourhood trust. This result gives significant policy implications for the development of residential community in Korea. Residential community as an intimacy zone has been eroded and desperately needs to be revitalized. For this, more concern should be given to the issue of desirable size of residential community and the types of houses. Detached house area must be supported by governmental policies.

• Journal of Forest and Environmental Science
• /
• 제40권1호
• /
• pp.24-34
• /
• 2024

Fire, being primarily a natural phenomenon, is impossible to control, although it is feasible to map the forest fire risk zone, minimizing the frequency of fires. The spread of a fire starting in any stand in a forest can be predicted, given the burning conditions. The natural cover of the land and the safety of the population may be threatened by the spread of forest fires; thus, the prevention of fire damage requires early discovery. Satellite data and geographic information system (GIS) can be used effectively to combine different forest-fire-causing factors for mapping the forest fire risk zone. This study mainly focuses on mapping forest fire risk in the Madikhola watershed. The primary causes of forest fires appear to be human negligence, uncontrolled fire in nearby forests and agricultural regions, and fire for pastoral purposes which were used to evaluate and assign risk values to the mapping process. The majority of fires, according to MODIS events, occurred from December to April, with March recording the highest occurrences. The Risk Zonation Map, which was prepared using LULC, Forest Type, Slope, Aspect, Elevation, Road Proximity, and Proximity to Water Bodies, showed that a High Fire Risk Zone comprised 29% of the Total Watershed Area, followed by a Moderate Risk Zone, covering 37% of the total area. The derived map products are helpful to local forest managers to minimize fire risks within the forests and take proper responses when fires break out. This study further recommends including the fuel factor and other fire-contributing factors to derive a higher resolution of the fire risk map.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.566-575
• /
• 1994

The effects of varying the pouring temperature and the die preheating temperature in producing centrifugally cast HP alloy modified with Nb was evaluated on the basis of the resultant macrostructure, microstructure and hardness of these castings. Increased die preheating temperatures and pouring temperatures resulted in an increase in the thickness of the columnar dendritic zone, the primary and secondary dendrite arm spacing and the thickness of the zone of porosity at the casting I.D.(inner diameter). Lower die preheating temperature and pouring temperatures result in increased grain fineness and an increased zone of equiaxed grains. A higher hardness was achieved toward the casting O.D.(outer diameter) compared to the casting I.D., attributable to alloy segregation toward the casting I.D. and segregation differences resulting from reduced solidification cooling rates toward the casting I.D. Also, a higher hardness was realized at the cold end of the casting attributed to a more uniform distribution of carbides.