• Safety and Health at Work
• /
• 제4권3호
• /
• pp.149-155
• /
• 2013

Background: Stochastic resonance whole-body vibration training (SR-WBV) was tested to reduce work-related musculoskeletal complaints. Methods: Participants were 54 white-collar employees of a Swiss organization. The controlled crossover design comprised two groups each given 4 weeks of exercise and no training during a second 4-week period. Outcome was daily musculoskeletal well-being, musculoskeletal pain, and surefootedness. In addition, participants performed a behavioral test on body balance prior to when SR-WBV started and after 4 weeks of SR-WBV. Results: Across the 4-week training period, musculoskeletal well-being and surefootedness were significantly increased (p < 0.05), whereas musculoskeletal pain was significantly reduced only in those who reported low back pain during the last 4 weeks prior to the study (p < 0.05). Body balance was significantly increased by SR-WBV (p < 0.05). Conclusion: SR-WBV seems to be an efficient option in primary prevention of musculoskeletal complaints and falls at work.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.213-219
• /
• 2018

Mechanical components are to be produced with accurate dimensions in order to function properly in assemblies of a machine. Once designs of mechanical components are created, designers examine the designs by adopting many known experimental methods. A primary test method includes stress and strain evaluation of structural parts. In addition, fatigue test and vibration analysis are an important test method for mechanical components. Real experiments at a laboratory are established when products are manufactured. Since design changes should be done before producing the designs in factories, rapid modifications for new designs are required in production industries. FEM simulation is a proper choice for a design evaluation with speed at a detail stage in design process. This research focuses modeling and mechanical simulation of a mechanical component in order to ensure structural safety. In this paper, a universal joint, being used in driving axels of vehicles, is studied as a target component. A design model is created and tested in some ways by using commercial software of FEM. The designed component is being twisted to transmit heavy power and thus, torsional stress should be under strengths of the component's material. The next is fatigue analysis to convince fatigue cycles to be within the endurance limit of the material. Another test is a vibration analysis for rotational components. This research draws final conclusions from these test analyses and recommends whether the designed model is under safety condition in terms of mechanical structure.

• 항공우주시스템공학회지
• /
• 제16권5호
• /
• pp.78-85
• /
• 2022

산악이나 도서 지역으로의 물품수송, 재난지역의 영상정보 획득 및 긴급 구호물품 등을 수송하는데 멀티콥터 형태의 무인기를 활용하고자 하는 수요가 증가하고 있다. 이와 같은 임무를 성공적으로 수행하기 위해서는 비행 조건에 따라 발생하는 하중을 기체 구조물이 안전하게 지지하는 동시에 프롭로터의 진동 및 공탄성 안정성 확보 여부를 확인할 필요가 있다. 본 논문에서는 엔진과 발전기 조합의 하이브리드 동력 시스템이 장착된 탑재중량 40kg급 멀티콥터 무인기의 구조해석 모델 생성과 하중조건에 따른 변형 및 응력 분포 검토과정을 소개하였다. 또한 비행 속도와 기체의 피치각 조건에 따른 프롭로터 시스템의 진동 특성과 공탄성 안정성 해석 결과를 제시하였다. 프롭로터를 통해 발생하는 최대추력 및 정상, 비정상 착륙조건에 따라 기체에 작용하는 착륙하중을 검토하였으며, 구조물의 파손 없이 지지할 수 있음을 확인하였다. 기체의 비행 속도와 프롭로터의 회전속도에 따라 주요 모드별 감쇠 특성이 안정한 영역에 위치함을 확인하였다.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1108-1118
• /
• 2009

A Very High Temperature Gas Cooled Reactor (VHTR) has been selected as a high energy heat source of the order of $950^{\circ}C$ for nuclear hydrogen generation, which can produce hydrogen from water or natural gas. A primary hot gas duct (HGD) as a coaxial double-tube type cross vessel is a key component connecting a reactor pressure vessel and an intermediate heat exchanger in the VHTR. In this study, a structural sizing methodology for the primary HGD of the VHTR is suggested in order to modulate a flow-induced vibration (FIV). And as an example, a structural sizing of the horizontal HGD with a coaxial double-tube structure was carried out using the suggested method. These activities include a decision of the geometric dimensions, a selection of the material, and an evaluation of the strength of the coaxial double-tube type cross vessel components. Also in order to compare the FIV characteristics of the proposed design cases, a fluid-structure interaction (FSI) analysis was carried out using the ADINA code.

• 전산구조공학
• /
• 제10권3호
• /
• pp.225-231
• /
• 1997

제어봉 구동장치(CEDM)의 동적거동은 원자로의 동적거동과 연동되어 있어, 두 구조물 간의 상호 동적 특성을 이해한 후 CEDM의 설계 개선 방향을 정립해야 한다. 원자로와 CEDM을 각각 1차 질량 및 2차 질량으로 하는 2 자유도계로 단순화하여 상호 동적 영향을 검토하고, 두 질량의 응답을 모두 감소시키는 최적의 .mu.-f곡선을 제시하였다. 설계 개선은 고유진동수비 f를 가능한 0.93부근으로 수렴시켜야 하며, 질량비 .mu.는 감소시키지 않아야 하고, 제시된 최적의 .mu.-f곡선에 접근시키는 방향으로 해야 함을 제안하였다. 이에 따라 CEDM의 부품들의 설계를 최적화하여 원자로와 CEDM의 변위 응답비를 각각 10.5-19.7%와 6.3-3.4%씩 모두 감소시킬 수 있었다.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.33-38
• /
• 2010

Technology of vehicle industry has been developing and it is required a better vehicle performance than before. Therefore, the consumers are asking not only an economic efficiency, functionality, polished design, ride comfort and silence but also a driving stability. The ride comfort, silence and driving stability are influenced by the size of vehicle and various facilities. But the principal factor is a room noise and vibration sensed by a driver and passenger. Thus, the NVH of vehicle has been raised and used as a principal factor for evaluation of vehicle performance. The primary objective of this study is an optimized design of powertrain mounting system. To optimized design was applied MSC.Nastran optimization modules. Results of dynamic analysis for powertrain mounting system was investigated. By theses results, design variables was applied 12 dynamic spring constant. And the weighting factor according to translational displacement and rotational displacement applied 3 cases. The objective function was applied to minimize displacement of powertrain. And the design variable constraint was imposed dynamic spring constant ratio. The constraint of design variable for objective function was imposed bounce displacement for powertrain.

• Smart Structures and Systems
• /
• 제30권4호
• /
• pp.339-351
• /
• 2022

Evaluating the current condition of existing structures is of primary importance for economic and safety reasons. This can be addressed by Structural System Identification (SSI). A reliable static SSI depends on well-designed sensor configuration and loading cases, as well as efficient parameter estimation algorithms. Static SSI by the Measurement Error-Minimizing Observability Method (MEMOM) is a model-based deterministic static SSI method that could estimate structural parameters from static responses. In the current state of the art, this method is only applicable when structures are subjected to one loading case. This might lead to lack of information in some local regions of the structure (such as the null curvatures zones). To address this issue, the SSI by MEMOM using multiple loading cases is proposed in this work. Observability equations obtained from different loading cases are concatenated simultaneously and an optimization procedure is introduced to obtain the estimations by minimizing the discrepancy between the predicted response and the measured one. In addition, a Genetic-Algorithm (GA)-based Optimal Sensor Placement (OSP) method is proposed to tackle the OSP problem under multiple static loading cases for the very first time. In this approach, the Fisher Information Matrix (FIM)'s determinant is used as the metric of the goodness of sensor configurations. The numerical examples of a 3-span continuous bridge and a 13-story frame, are analyzed to validate the applicability of the extended SSI by MEMOM and the GA-based OSP method.

• 한국광학회지
• /
• 제22권6호
• /
• pp.262-268
• /
• 2011

한국천문연구원이 개발한 다목적적외선영상시스템(Multi-purpose IR Imaging System, MIRIS)은 과학기술위성 3호(STSAT-3)의 주탑재체이다. 지구관측카메라(Earth Observation Camera, EOC)는 MIRIS를 구성하는 두 개의 적외선 카메라 중에 하나로, 지구의 $3{\sim}5{\mu}m$ 파장대의 적외선을 관측하기 위한 카메라이다. EOC의 광학계는 카세그레인 방식으로써 구경이 100 mm이고, 주경과 부경은 모두 비구면 반사경이다. EOC 주경의 플렉서는 링 타입으로써 발사환경에서 주경이 겪을 수 있는 충격과 진동을 견디도록 예압을 가하며 주경을 지지한다. 이는 마치 리테이너로 렌즈를 지지하는 것과 같은 메커니즘으로 주경을 지지하기 위한 시도이다. 광기계 해석을 통해 EOC 주경이 효과적으로 지지되고 있음을 확인했다.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.83-101
• /
• 2005

This paper summarizes the application of a rational methodology for the structural assessment of older reinforced concrete Tunisian bridges. This methodology is based on ambient vibration measurement of the bridge, identification of the structure's modal signature and finite element model updating. The selected case study is the Boujnah bridge of the Tunis-Msaken Highway. This bridge is made of a continuous four-span simply supported reinforced concrete slab without girders resting on elastomeric bearings at each support. Ambient vibration tests were conducted on the bridge using a data acquisition system with nine force-balance accelerometers placed at selected locations of the bridge. The Enhanced Frequency Domain Decomposition technique was applied to extract the dynamic characteristics of the bridge. The finite element model was updated in order to obtain a reasonable correlation between experimental and numerical modal properties. For the model updating part of the study, the parameters selected for the updating process include the concrete modulus of elasticity, the elastic bearing stiffness and the foundation spring stiffnesses. The primary objective of the paper is to demonstrate the use of the Enhanced Frequency Domain Decomposition technique combined with model updating to provide data that could be used to assess the structural condition of the selected bridge. The application of the proposed methodology led to a relatively faithful linear elastic model of the bridge in its present condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.619-624
• /
• 2002

A prestressed/precast concrete system was used to build the new Asian Olympic Stadium Project in Pusan, Korea. The stadium(mainly intended for cycle racing) is designed for the 2002 Asian Olympic Games and has a seating capacity of 20,000 spectators plus a few private suites. More than 1300 prestressed/precast components were used and they include single columns, primary beams, cantilever beams, double riser stands, and double tees. Especially, a total of 24 cantilever beams is used on the fourth story for the stands and double tees. These 8m long beams are post-tensioned to prevent cracking, to increase their durability and to serve serviceability by vibration. A cantilever section with cast-in-place topping is 800mm wide and 1500mm deep. Cantilever beams are connected to the column with the corbel by cast-in place concrete. Bonded post-tensioning tendons were assembled at the job site. Dead-end anchorages were installed in the end of cantilever beams and live-end anchorage is the opposite of them. This article presents the geometric layouts, design features and so on.