Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation of FIV Characteristics on a Coaxial Double-tube Structure

동심축 이중관 구조에서 유동기인진동 특성 고찰

  • Published : 2009.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

A Very High Temperature Gas Cooled Reactor (VHTR) has been selected as a high energy heat source of the order of $950^{\circ}C$ for nuclear hydrogen generation, which can produce hydrogen from water or natural gas. A primary hot gas duct (HGD) as a coaxial double-tube type cross vessel is a key component connecting a reactor pressure vessel and an intermediate heat exchanger in the VHTR. In this study, a structural sizing methodology for the primary HGD of the VHTR is suggested in order to modulate a flow-induced vibration (FIV). And as an example, a structural sizing of the horizontal HGD with a coaxial double-tube structure was carried out using the suggested method. These activities include a decision of the geometric dimensions, a selection of the material, and an evaluation of the strength of the coaxial double-tube type cross vessel components. Also in order to compare the FIV characteristics of the proposed design cases, a fluid-structure interaction (FSI) analysis was carried out using the ADINA code.

Keywords

References

  1. Chang, J. H. et al., 2007, 'A Study of a Nuclear Hydrogen Production Demonstration Plant,' Nuclear Engineering and Technology, Vol. 39, No .4, pp. 111-112 https://doi.org/10.5516/NET.2007.39.2.111
  2. Lohnert, G.H., 1990, Engineering and Design Vol. 121, p. 259
  3. Huang, Z. Y. et al., 2002, 'Design and Experiment of Hot Gas Duct for the HTR-10,' Nuclear Engineering and Design, Vol. 218, p. 137 https://doi.org/10.1016/S0029-5493(02)00206-6
  4. Nakase, T., Midoriyama, S., Roko, K. and Yoshizaki, A., 1984, 'Two Layers Thermal Insulations Tests for Designing of Hot Gas Ducts,' Specialist's Meeting on Heat Exchanging Components of Gas-cooled Reactors, Duesseldorf, Germany, April 16-19
  5. Chen, Y. N., 1970, 'Flow-induced Vibration in Tube Bundle Heat Exchangers with Cross and Parallel Flow, Part I: Parallel Flow,' in Flowinduced Vibration in Heat Exchangers, ASME, New York, pp. 57-66
  6. Paidoussis, M. P., 1981, 'Fluidelastic Vibration of Cylinder Arrays in Axial and Cross Flow: State of the Art,' Journal of Sound and Vibration, Vol. 76, pp. 329-360 https://doi.org/10.1016/0022-460X(81)90516-2
  7. Reavis, J. R., 1969, 'Vibration Correlation for Maximum Fuel Element Displacement in Parallel Turbulant Flow,' Nuclear Science and Engineering, Vol. 25, pp. 626-628
  8. Wambsganss, M. W. and Chen, S. S., 1971, 'Tentative Design Guide for Calculating the Vibration Response of Flexible Cylindrical Elements in Axial Flow,' Argonne National laboratory Report ANL-ETD-71-07
  9. Kang, H. S. et al., 2003, 'Axial-flow-induced Vibration for a Rod Supported by translation Springs at Both Ends,' Nuclear Engineering and Design, Vol. 220, pp. 83-90
  10. Blevins, R. D., 1990, Flow-Induced Vibration, 2nd ed., Van Nostrand Reinhold, New York, pp. 268-271
  11. McEligot, D. M., Ormand, L. W. and Perkins, H. C., 1966, 'Internal Low Reynolds Number Turbulent and Transitional Gas Flow with Heat Transfer' , Journal of Heat Transfer, Vol. 88, pp. 239–245
  12. ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection ND-Class 3 Components, 1993
  13. US NRC Standard Review Plan, Chapter 3.7.2., 1985
  14. ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NF-Component Support, 1993
  15. Kim, Y. W. et al., 2009, Development of Essential Technology for VHTR, KAERI/RR-2992/2008
  16. GT-MHR Conceptual Design Description Report, 1996, GA-910720, Rev. 1, General Atomics
  17. H2-MHR Pre-conceptual Design Report, GA-A25401, 2006, General Atomics
  18. Song, K. N., 2007, Calc. note No. NHDD-KA07- ME-002, Rev.02, KAERI
  19. Kim, W. G., 2006, 'Heat Property Data of Alloy 617,' Internal Memorandum of KAERI NHDD Project, NHDD-KA-06-MA-BT-002
  20. Kim, S. H., 2006, 'Properties of Pressure Vessel Candidates(SA508-Gr.3 and Modified 9Cr-1Mo),' Internal Memorandum of KAERI NHDD Project, NHDD-KA-06-MA- BT-003
  21. Kim, D. W., 2006, 'Properties of Core Barrel Candidate(Alloy 800),' Internal Memorandum of KAERI NHDD Project, NHDD-KA-06-MA-BT-001
  22. NIST, Thermo-physical Properties of Fluid System, http://webbook.nist.gov/chemistry/fluid/
  23. ADINA R&D Inc., ADINA Theory and Modelling Duide Vol. III: ADINA CFD & FSI, Report ARD 08-9, Feb. 2008

Cited by

  1. Forensic Engineering Study on Structure Stability Evaluation of Deep Cement Mixing Vessel using ADINA Software vol.38, pp.11, 2014, https://doi.org/10.3795/KSME-A.2014.38.11.1283
  2. Macroscopic High-Temperature Structural Analysis Model of Small-Scale PCHE Prototype (II) vol.35, pp.9, 2011, https://doi.org/10.3795/KSME-A.2011.35.9.1137
  3. High-Temperature Structural Analysis of a Small-Scale Prototype of a Process Heat Exchanger (IV) - Macroscopic High-Temperature Elastic-Plastic Analysis - vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1249
  4. Macroscopic High-Temperature Structural Analysis Model for a Small-Scale PCHE Prototype (I) vol.35, pp.11, 2011, https://doi.org/10.3795/KSME-A.2011.35.11.1499
  5. High-temperature Structural Analysis of Small-scale Prototype of Process Heat Exchanger (III) vol.35, pp.2, 2011, https://doi.org/10.3795/KSME-A.2011.35.2.191