• Title/Summary/Keyword: Price Control

Search Result 814, Processing Time 0.029 seconds

Study on the Establishment of Barley Cultivation System using the Power Tiller (동력경운기를 중심으로한 맥류재배의 기계화 -관작업체계 확립에 관한 연구)

  • 이영렬;최규홍
    • Journal of Biosystems Engineering
    • /
    • v.3 no.2
    • /
    • pp.22-33
    • /
    • 1978
  • To maintain the self-sufficiency of food production , it is required to improved the productivity and increase the effective utilization of land in the double cropping areas using improved cultivation technology. The following reasons encourage this cours of action because the overlapping rice harvest and barely seeding seasons complete for labour, the lower price of barley makes it financially less attractive to grow and these two facts together are responsible for a decrease in barley being planted in certain more seasonably marginal double cropping areas. Fro these reasons, it is desirable to carry out tests to improve the current cultivation techniques . In this interest , the following studies were carried out in the experimental field located at Banweol-myeon, Whasung-jkun, Gyeonggi-do from October 1977 to July 1978 in order to establish the mechanical method of barley cultivation using the power tiller. The summarized results are as follows. 1. The work performance in the seeding operation using the rotary barley seeder was 68 minutes per 10 ares which compares favourably with 408 min/10a using the conventional method. This is only one sixth of the time required by th conventional method. The operating costs using the rotary barley seeder was 1, 463 won per 10 areas as against 3, 486 Won per 10 ares for the conventional method, showing a saving of about 50% in comparison with the conventional method. 2. In the manure spreading operation, the work performance was 25 min/10a for the manure spreading machine , compared to 1089 min/10a for the manual operations. This is about one fourth of the time required by the conventional method, The operating costs were 810 Won/10a for the machine and 857 Won/10a for the manual labour. This cost shows little advantage by the machine over the manual labor costs. The conventional method of manure spreading will continue pending decision which will develope and improve the machine.3. Work performance in the rolling operation using the barley rolIer was 30 min/lOa which compares favourably with 135 min/10a using conventional method. This was one fourth of the time required by the conventional method. The operating costs were 514 Won/103. for the machine and 1, 003 Won/lOa for manual labour. In the weed control operation, the work performance and operating costs were 45min/lOa, 1, 399won/10a for the herbcide application using the power sprayer, 1, 149min/10a 8, 541won/lOa for the conventional method respectively. This is 26 times higher efficiency in comparison to the conventional method. 4. In the harvesting operation using the reaper binder and tiller attachment, the work performance was 60min/lOa and represents a cost of 2, 039won/10a. The con\ulcornerventional method took 640min/10a at a cost of 4, 757won/lOa. The reaper binder showns a saving of one tenth over the conventional method. The automatic thresher is already recommended for the current situations, and is now being used. 5. From a comparison of the results of the above trials, the serial cultivation system using the attachment for the power tiller such as the rotary barley seeder is now to be recommended for the current barley cultivation system. It is also recommend from these results that the mechanized technology now available must be used to improve and maintain the increase in barley production. It is seen th1t this is the only course now avaihble to solve the peak seasonal requirements of labour needed for l11rvesting and seeding between rice and barley cultivation.

  • PDF

Dental Care Utilization pattern of City Residents (소도시(小都市) 주민(住民)의 치과의료(齒科醫療) 이용양상(利用樣相))

  • Park, Myung-Ja
    • Journal of Technologic Dentistry
    • /
    • v.14 no.1
    • /
    • pp.67-79
    • /
    • 1992
  • This study was conducted to analyze the dental care utilization pattern of the city residents. An interview and questionnaire survey was carried for 1008 people who lived in Kimchun-city, Kyungsangpook-do, from february 1 to March 30, 1992. The summarized results are as follows : The rate of persons who experienced the oral disease was 32.7 per 100 persons during 1 year and it was highest in the age group of 20$\sim$29. During 1 year period, 90.3% of the cases had treated the perceived oral disease, 9.7% had done no action. 65.8% had treated experienced oral disease at dental clinics. The rate of person who dad experienced dental prosthesis during ten-year period was 37.5% among 18year and older, and it was higher in male as compared to female and it was highest in age group of 40$\sim$64 year old. The rate of person who had treated dental prosthetics by the unauthorized illegally was 27.0%, and the reason for it was cheap-price free(44.2%). Of the person who dad treated dental prosthetics by the unauthorized illegally, 64.3% had satisfied and 4.3% had done out of use, while each was 80.1%, 2.7% at dental clinics. The rate of persons with missing teeth was 18.0%. Of the persons with missing teeth, 57.6% did not treat the missing teeth due to economic reason and 89.6% hopped treating the dental prosthetics at dental clinics. In consideration of above finding, we may conclude that oral health community program to prevent oral diseases should be intensified, oral health education to raise oral health knowledge should be performed periodically and the control of unlicensed activities should be enforce at community health center and allows benefits for prosthetics.

  • PDF

Quality Preservation of Shredded Carrots Stored in UV LED Packaging System (자외선 LED 포장용기 시스템에 의한 포장절단당근의 품질보존)

  • Kim, Nam Yong;Lee, Dong Sun;An, Duck Soon
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.1
    • /
    • pp.135-140
    • /
    • 2014
  • Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.

Effects of Private Insurance on Medical Expenditure (민간의료보험 가입이 의료이용에 미치는 영향)

  • Yun, Hee Suk
    • KDI Journal of Economic Policy
    • /
    • v.30 no.2
    • /
    • pp.99-128
    • /
    • 2008
  • Nearly all Koreans are insured through National Health Insurance(NHI). While NHI coverage is nearly universal, it is not complete. Coverage is largely limited to minimal level of hospital and physician expenses, and copayments are required in each case. As a result, Korea's public insurance system covers roughly 50% of overall individual health expenditures, and the remaining 50% consists of copayments for basic services, spending on services that are either not covered or poorly covered by the public system. In response to these gaps in the public system, 64% of the Korean population has supplemental private health insurance. Expansion of private health insurance raises negative externality issue. Like public financing schemes in other countries, the Korean system imposes cost-sharing on patients as a strategy for controlling utilization. Because most insurance policies reimburse patients for their out-of-pocket payments, supplemental insurance is likely to negate the impact of the policy, raising both total and public sector health spending. So far, most empirical analysis of supplemental health insurance to date has focused on the US Medigap programme. It is found that those with supplements apparently consume more health care. Two reasons for higher health care consumption by those with supplements suggest themselves. One is the moral hazard effect: by eliminating copayments and deductibles, supplements reduce the marginal price of care and induce additional consumption. The other explanation is that supplements are purchased by those who anticipate high health expenditures - adverse effect. The main issue addressed has been the separation of the moral hazard effect from the adverse selection one. The general conclusion is that the evidence on adverse selection based on observable variables is mixed. This article investigates the extent to which private supplementary insurance affect use of health care services by public health insurance enrollees, using Korean administrative data and private supplements related data collected through all relevant private insurance companies. I applied a multivariate two-part model to analyze the effects of various types of supplements on the likelihood and level of public health insurance spending and estimated marginal effects of supplements. Separate models were estimated for inpatients and outpatients in public insurance spending. The first part of the model estimated the likelihood of positive spending using probit regression, and the second part estimated the log of spending for those with positive spending. Use of a detailed information of individuals' public health insurance from administration data and of private insurance status from insurance companies made it possible to control for health status, the types of supplemental insurance owned by theses individuals, and other factors that explain spending variations across supplemental insurance categories in isolating the effects of supplemental insurance. Data from 2004 to 2006 were used, and this study found that private insurance increased the probability of a physician visit by less than 1 percent and a hospital admission by about 1 percent. However, supplemental insurance was not found to be associated with a bigger health care service utilization. Two-part models of health care utilization and expenditures showed that those without supplemental insurance had higher inpatient and outpatient expenditures than those with supplements, even after controlling for observable differences.

  • PDF

Calculating the Audit Fee Based on the Estimated Cost (예정원가계산에 의한 감사보수 산정)

  • Mun, Tae-Hyoung
    • Management & Information Systems Review
    • /
    • v.35 no.1
    • /
    • pp.189-206
    • /
    • 2016
  • It was required to attach the documents on the details of external audit including the number of the participants in external audit, audited parts and audit times under the Article 7-2 on the audit report to the accounting audit report from 2014 in accordance with the amendment to the Act on External Audit of Stock Companies. This study aim to calculate the audit fee based on the estimated cost of service calculation of the government contribution agencies by reflecting the implementation of the revised external audit. This study calculated the audit fee for the target company (a listed company assumed to have no internal control risks and relevant audit risks for unqualified opinion in the previous year, 100 billion won of total amount of asset, manufacturing company in the previous year and preliminary client request) by putting together four items of expenditure including employment costs, expenditure, general management expenses and profit in accordance with the calculation system of cost of service under the State Contract Act. Then, it used the data collected from the documents on the details of the revised external audit after requesting estimation on the target company with the estimated cost to Big-4 accounting firms to identify the participants and times of the accounting audit. The employment costs applied 150% of participation rate of the base price of employment costs for the academic research service cost in 2014, the expenditure used the average value of accounting firms of corporate business management analysis of the Bank of Korea (2013), the general management expenses applied 5% of the general management rate of service business under Article 7-1 of the Enforcement Rule of the Act on Contracts to which the State is a Party and the profit applied 10% of profit rate of service business under Article 7-2 of the Enforcement Rule of the Act on Contracts to which the State is a Party. Based on the calculation of the estimated costs by applying the above, the audit fee was estimated at 50,617,769won. Although the result is not the optimal audit fee, it may be used as a basic scale to compare the audit fees of companies without criteria. Also, such amendment to the Act on External Audit of Stock Companies may improve independence of auditors and transparency of the accounting system rather than previous announcing only the total audit times.

  • PDF

Establishment of Economic Threshold by Evaluation of Yield Component and Yield Damages Caused by Rice Leaf Blast (Magnaporthe grisea) (벼 잎도열병 피해해석에 의한 경제적 방제수준 설정)

  • Yeh, Wan-Hee;Park, Hong-Hyun;Nam, Young-Ju;Kim, Seol-A;Lee, Jeong-Hee;Shim, Hong-Sik;Kim, Yong-Ki;Lee, Yong-Hwan;Lee, Yeong-Hoon
    • Research in Plant Disease
    • /
    • v.14 no.1
    • /
    • pp.21-25
    • /
    • 2008
  • This study was conducted to decide disease incidence level of rice leaf blast required for reasonable fungicide application in paddy field. We induced the disease development by inoculating rice blast pathogens on rice seedlings (Jinmibyeo) in the greenhouse and transplanting the infected seedlings in the field two weeks after rice plants were transplanted. We scored the disease incidence, grouped and marked according to degree of percentage of diseased leaf area at maximum stage of disease development. The percent diseased leaf area (PDLA) had negative correlations with panicle number per hill, ripened grain (%), and total yield; their correlation coefficients (r), $-0.97^{**}$, $-1.00^{**}$ and $-0.96^{**}$, respectively. However, it had positive correlations with spikelets per panicle and thousand grain weight; their correlation coefficients (r), $0.98^{**}$ and $0.98^{**}$, respectively. Gain threshold (GT) calculated based on control cost and market price was estimated to be 8.35. Economic injury level (EIL) obtained based on GT and coefficient of damage of regression equation between disease incidence and the different yield components; panicle number per hill, spikelets per panical, ripened grain(%), thousand grain weight and yield were 41.8, 9.7, 19.1, 291.1 and 3.4%, respectively. Economic threshold (ET) for yield was 2.7% ($3.4%(EIL){\times}0.8$) on PDLA. These results suggest that application of fungicide is necessary when two under leaves are almost covered with lesions or contained more than twenty large lesions under leaves at maximum tillering stage.

Experimental Comparison and Analysis of Measurement Results Using Various Flow Meters (유량측정 기기별 측정성과에 대한 실험적 비교분석)

  • Lee, Jae-Hyug;Lee, Suk-Ho;Jung, Sung-Won;Kim, Tae-Woong
    • Journal of Wetlands Research
    • /
    • v.12 no.1
    • /
    • pp.95-103
    • /
    • 2010
  • Discharge data examine the process of hydrologic cycle and used significantly in water resource planning and irrigation and flood control planning. However, it needs lots of time and money to get the discharge data. So discharge rating curve is usually used in converting discharge data. Therefore reliability of discharge rating curve absolutely depends on quality of discharge data. Many engineers who study hydrologic engineering make high quality discharge data to develop reliable discharge rating curve. And they carry out research on standard and method of discharge measurement, and equipment improvement. Now various flow meters are utilized to make discharge data in Korea. However, accuracy of equipment and experimental research data from measurement are not enough. In this paper, constant discharge flowed through standard concrete channel, and the velocity is measured using various flow meters. Also Discharge is calculated by measured data to compare and analyze. The equipment for the experiment is Price AA(USGS Type AA Current meter), flow meter, ADC, C2 small current meter, flow tracker, Electromagnetic current meter. The discharge got form various flow meters which are widely used for discharge measurement. The various depths of water were examined and compared such as 0.30 m, 0.35 m, 0.40 m, 0.45 m, 0.50 m, 0.55 m. The experiment progresses a round-measurement on 6-case. Wading measurement(one point method : the 60 % height in surface of the water) was applied to improve creditability and accuracy among measurement methods. USGS Type AA current Meter, Flow Meter, ADC, C2 Small Current meter got the certificate of quality guaranteed. So the results of experiment were used to compare discharge. The Results showed the difference based on USGS Type AA current Meter at average discharge and velocity. Electromagnetic current meter made differences over $\pm$ 10 % and Flow Meter made differences under $\pm$ 10 %. Also ADC, Flow Meter, C2 Small Current meter made differences under $\pm$ 5 %.

The Study on the Qualities of Commercial Anchovy Sauces and Kimchies Prepared with Different Anchovy Sauces (시판 멸치 액젓의 품질과 그 액젓으로 제조한 김치의 품질 연구)

  • 문갑순;송영선;류복미;전영수
    • Korean journal of food and cookery science
    • /
    • v.13 no.3
    • /
    • pp.272-277
    • /
    • 1997
  • To evaluate the quality of commercial anchovy sauces, 8 varieties (2 products from the Fishery Cooperation, 2 from small companies, and 4 well-known brands) were chosen and their physicochemical and sensory properties were examined. The salinity of anchovy sauces ranged from 19.8% to 26%, where product E was the saltiest and followed by F> H > B > E > A> C = G > D. Product D with the least salinity was turbid, rancid, and high in ammonia content, suggesting that it is difficult to control the quality of anchovy source with a low salt content. Protein content of anchovy sauces ranged from 2.51% to 2.64%. The unit price of anchovy source A was the highest, whereas B was the lowest. Sensory evaluation scores of anchovy sauces were in the order of B > G > A > F > E > C > H > D for color, B > G = C > H > E = F > G > D for odor, E > C > F > G > H > D > B > A for saltiness, and B > A > C > H > E = F > G > D for overall acceptability. Above results suggest that product B was the best in quality as well as the cheapest among all. Based on the above results, kimchies were prepared with product A, B, C with a high sensory quality and product H with a high market occupancy, and sensory evaluation was performed. The kimchi with product C got the highest sensory score in appearance and the one with product A and H in odor. Although the kimchi with product A generally had high scores throughout the fermentation period, there were no significant differences in texture, salty taste, and overall acceptability among kimchies with different varieties of anchovy sauces.

  • PDF

A Study on the Fabrication and Comparison of the Phantom for CT Dose Measurements Using 3D Printer (3D프린터를 이용한 CT 선량측정 팬텀 제작 및 비교에 관한 연구)

  • Yoon, Myeong-Seong;Kang, Seong-Hyeon;Hong, Soon-Min;Lee, Youngjin;Han, Dong-Koon
    • Journal of the Korean Society of Radiology
    • /
    • v.12 no.6
    • /
    • pp.737-743
    • /
    • 2018
  • Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

The Development of Coin Circulation Institutes and their Regional Impact during the Reign of King Hyojong(孝宗) (효종조(孝宗朝) 행전사목(行錢事目)과 행전책(行錢策), 성과와 한계)

  • JUNG, Suhwan
    • (The)Study of the Eastern Classic
    • /
    • no.73
    • /
    • pp.153-184
    • /
    • 2018
  • The aim of this thesis was to examine the circumstances that led up to successful coin use across the entire nation in 1678 (the $4^{th}$ year of King Sukjong's reign), during the Joseon Dynasty. To this end, this thesis analysed the Sa-Mouk(事目, Provisions) that contained the institutional protocol for coin circulation, implemented by King Hyojong and the statesman Kim Youk(金堉) who had practical experience in these matters over the ten years of King Hyojong's reign(1649-1659). To regulate the problematic wide circulation of coarse cotton cloth as currency in the market of 1650 (the $1^{st}$ year of King Hyojong's reign), prohibition measures were implemented. Besides the superficial justification given for these measures(i.e., that the market price was disturbed by the use of coarse cotton cloth), there was another purpose to prohibiting the circulation of cotton cloth as money, following the standard ruled by the government: the state aimed to ensure momentum for the upcoming coin circulation policy, by strengthening its control of the current economy. In 1651 (the $2^{nd}$ year of King Hyojong's reign), the government fully cracked down on the use of coarse cotton cloth as currency, and simultaneously implemented its coin circulation policy in the Pyeongan(平安) region. The pretext for this policy was to raise finances to support people who were starving as a result of poor harvests and famine. People who received coins from government officials could purchase food in the market, and the coin circulation policy was judged to be successful. Subsequently, to extend coin circulation further throughout the region, the Sa-Mouk for Seoul was established. The Sa-Mouk included stipulations regarding the use of coin in transactions and for government expenditure; it aimed thereby to enhance the national policy's market credit. The hasty implementation of the policy for the expansion of coin circulation caused some problems that required its modification. In 1652 (the $3^{rd}$ year of King Hyojong's reign), coin circulation was increased to encompass the Gyeonggi(京畿) region, and some of the tax that had been paid in rice was now paid in coin. However, coins were in short supply, since there was insufficient copper, the main material used in coin production, and the policy faced a significant limitation. Therefore, in 1655(the $6^{th}$ year of King Hyojong's reign), a new Sa-Mouk for coin circulation was established. This Sa-Mouk included specifications regarding the determination of coin values based on rice and silver, and mandated the wide spread installation of stores for exchanging spot goods for coins throughout the region in which coins were circulating. This policy's objective was to secure stability for the national economy by further regulating coin circulation. The sustained implementation of the coin circulation policy for ten years by King Hyojong and the statesman Kim Youk offered the government an opportunity to accumulate experience in coin circulation in the market, and also to learn from institutional trial and error. This may have been one of the contributing factors to the nation-wide coin circulation that was established in 1678. The objective of the policy implemented during King Hyojong's reign was not to meet the market's requirements, but rather to ensure the preservation of the national economy, and this misjudgement constituted the policy's key limitation. At this time, the government urgently needed to secure finances to cope with the war against China's Qing Dynasty.