• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.1
• /
• pp.98-109
• /
• 2001

This study aimed to investigate the effect of revegetation technique for water attacking point using waterlogged prevention frame revetment. In this study, we evaluate frame revetment stability, water quality, plant growth and ecological and envirnomental changes in Mooshim streamside landscape. The results are as follows; 1) The waterlogged prevention frame revetment appeared to be stable despite of two big floods. The materials used for the revetment were not eroded on the water attacking point. Thus, we confirmed the effect of scour prevention of the frame work. 2) The effects of the frame revetment on the water quality appeared to be good for the surrounding environment. Dissolved Oxygen(DO) was higher about $0.4{\sim}0.6mg/{\ell}$ at the frame revetment than that of the main stream flow. pH value was lower about 0.4~0.5. Electric Conductivity(EC) showed lower about $0.8{\sim}1.1{\mu}s/cm$. at submersion prevent frame than the low-flow of the stream. Turbidity was lower about $0.6{\sim}1.2mg/{\ell}$. 3) As the effects on ecological and environmental conditions, we discovered a number of carassius auratus and Zacco platypus in the frame revetment area. Also, sympetrum balteata, coenagrionidae was observed frequently. 4) The plant growth did not appear to tumble or wither despite of two big floods. The visual rating of plant growth was evaluated as medium (around 5 point) 5) The landscape analysis derived four factors(i.e. the harmony, the variation, the flexibility and the provincial characteristics) from the factor analysis.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.661-668
• /
• 2013

A safety critical system is a system that leads to injury of people, damage of property and environment due to functional failures or occurrence of undesired condition. Therefore, to ensure the safety of a system, system engineers should consider the inherent hazards of the system at design phase of the system development, and also should design the prevention actions to minimize damage when an accident occurred. The objective of these actions is preventing the serious damage from accidents that can occur due to unforeseen circumstance. Recently, many studies have been performed to identify and analyze their hazards at design phase of safety critical systems. This paper suggests a safety analysis technique for analyzing the collision among those prevention actions to reduce accident and its effect by the collision of these actions that did not mentioned in previous studies. Through the proposed technique, it would improve robustness of safety and would help the design of prevention actions into system for the occurrence of accidents.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2021

According to the Ministry of Employment and Labor's statistics on occupational fatalities in South Korea, more than half of the fatalities in the past five years have occurred in the construction industry. The stuck-by and caught-in-between accidents associated with construction equipment is the major source of fatalities from construction sites. In order to prevent such accidents in construction sites, the government has spent lots of efforts including proposing the "special law on construction safety" and encouraging the implementation of new technology for accident prevention. However, numerous accidents are still occurred at construction sites and further efforts are still required. In this manner, this study developed a collision prevention technique that can prevent collision between equipment and worker by recognizing location and type of the nearby objects through ultrasound scanning. The study conducted a pilot experiment and the analysis results demonstrate the feasibility of achieving high performance in both object recognition and location estimation. The developed technique will contribute to prevent collision accidents at construction sites and provide the supplemental knowledge on developing automated collision prevention system for construction equipment.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1213-1221
• /
• 2014

In the background of rapid urbanization and frequent earthquakes, earthquake disaster prevention planning has become an important topic of current research. Universities are irreplaceable disaster shelter, as they are public institutions with a lot of open space. This article puts forward the concept of "disaster prevention campus". With the refuge behavioral and psychological characteristics of people in the campus when the earthquake happens, it integrated uses GIS spatial analysis technique, takes Shandong Agricultural University as an example, and studies the spatial pattern of earthquake disaster prevention planning in campus from five aspects. The aspects include building distribution, population distribution, analysis of service radius, infrastructure configuration and choice of the optimal refuge path. On the basis of researches above, reform proposals and specific strategies are put forward to build the safe and harmonious disaster prevention campus.

• Management & Information Systems Review
• /
• v.22
• /
• pp.211-229
• /
• 2007

The ISO/TS16949 APQP goal of defect prevention and decrease of spread waste, is the customer satisfaction which leads a continuous improvement and profit creation. The quality expense where the most is caused by but with increase of production initial quality problem occurrence is increasing to is actuality. Like this confirmation amendment. with the problem which is forecast in the place development at the initial stage which it does completeness it does not confront not to be able, production phase to be imminent, the problem accumulates and it talks the development shedding of which occurs. In opposition, prediction confrontation. is forecast in development early stage to and it is a structure which does not occur a problem to production early stage. Like this development is a possibility of accomplishing competitive company from production phase. Which attains an goal of, chance cause it leads a APQP activity (common cause) with special cause prevention & detection the connection characteristic of the focus technique against a interaction is important. And the customer requirement satisfaction and must convert a APQP goal of attainment at the key characteristics action step. (1) The Prevention - with Design FMEA application prevention of the present design management/detection, (2) the Detection (prevention/detection) - with Process FMEA application prevention of the present process control/detection, (3) Special Cause - statistical process control (SPC) 4M cause spread removal, (4) Common Cause - statistical process control (SPC) the nothing zero defect which leads the continuous improvement back of spread with application it will be able to attain with application.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.259-262
• /
• 2007

In our country it develop damage reduction and prediction technology for prevention the danger of the rockfall and landslide which is repeated yearly. And it constructs integrated and efficient the misfortune management system it will be able to manage. So we will accomplish aims that is the rockfall and landslide damage occurrence reduction.

• 연구논문집
• /
• s.28
• /
• pp.137-143
• /
• 1998

In the case of a boiler, scale is made in the tube by the chemical reactions of Ca and Mg ions contained in the water, and heat transfer rate is reduced because of increasement of heat resistance in the pipe of the heat flow. Thus it brings to reduce the energy efficiency and to make environmental pollution by the use of chemicals for the prevention and removement of scale. In this paper, we discussed the design of electronic generator for dual ultrasonic transmitters and analyzed the effect of scale prevention by ultrasound.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.169-175
• /
• 2007

As the concept of Ubiquitous Computing has become an important issue, we need to have a voice in the field of Crime Prevention Technology. Ubiquitous Computing means that IT network based on realization of 6A(Anytime, Anywhere, Anybody, Anynetwork, Anydevice, Anyservice) is deeply penetrated into our daily life. As ITS has developed with the aid of IT and Crime Prevention Technology together, we need to discuss u-Crime Prevention or Crime Prevention sector is mentioned as a major application of Ubiquitous Computing.

• Journal of Korean Society on Water Environment
• /
• v.33 no.3
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.439-445
• /
• 2005

The stud bolt is one of crucial parts for safe operation of reactor vessels in nuclear power plants, Crack initiation and propagation were reported in stud bolts that arc used for closure of reactor vessel and head, Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure which could induce radioactive leakage from nuclear reactor, In conventional ultrasonic testing for inspection of stud bolts, cracks are detected by using shadow effect It takes too much time to inspect stud bolts by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread, In this study, the signal processing technique for enhancing conventional ultrasonic technique was introduced for inspecting stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. Detectability for small crack was enhanced by using this signal processing in ultrasonic inspection of stud bolts in Nuclear Power Plants.