• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.167-176
• /
• 1999

Construction accidents occur reiteratively in similar fashions. There have been several attempts to develop a safety program for preventing construction accidents on sites. It will be very effective to use previous accident cases for establishing proper safety plan and managing safety process. This research develops a case-based construction safety management system which enables construction managers or safety managers to prevent potential accidents during the construction process. The case-oriented approach is performed through the representation of previous accident cases in accordant with the similarity to the conditions of current site. It uses a case-based reasoning which is one of the reasoning methods of an expert system. A prototype system for the reasoning model was implemented using one of the case based system development tools. The system was applied to a real construction site to verify its capability and validity. It was founded that the causes of accidents were successfully removed, so the proposed model proved to be reasonable. Additional research is needed to resolve the technical problem how to adapt the countermeasures for accident prevention provided by the reasoning model.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.9-10
• /
• 2014

Cracks on the surface of latex-modified concrete using ready mix concrete (R-LMC) are attributable to its sensitivity to air temperature, relative humidity and wind velocity. Insufficient curing under the windy condition causes plastic shrinkage cracks. The cracked areas should be replaced to prevent development of larger cracks. This paper investigated how the vibration resulted from crushing concrete for replacement of the partial cracked area affects bond strength of R-LMC at early age. To analyze bond strength of R-LMC, the commercial Finite Element (FE) program, ABAQUS Standard/Implicit version 6.12 was used, and bond strength was tested by ASTM C1583-04. The real vibration was applied to this FE model using an acceleration measurement equipment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.133-144
• /
• 2003

Generally, diaphragms are installed in the box girder to prevent or decrease the distortion of tile cross section. In engineering practice, diaphragms are spaced in 5m intervals without reasonable basis. ANd the usual diaphragm type is solid-plate type. It is considered to be noneconomical design to the almost design engineers. In this paper, the parametric study was performed to present the design proposal about the diaphragm stiffness and spacing only in tire single cell box girder. For that, the distortional warping normal stress, bending normal stress and transverse bending normal stress were analyzed using finite element program 'SMB' for the accurate structural analysis.

• Journal of the Korean Dietetic Association
• /
• v.22 no.3
• /
• pp.225-231
• /
• 2016

The study suggests the possibility of using internet of things for a dietary intake survey. The development scenario of the dietary intake survey was composed of a weighing sensor for measuring food weight, bluetooth module for communicating through smart-phones, and smart-phone application. The weighing sensor attached to the bottom of utensils was designed to measure the weight of initial food & food eaten, and the results were transmitted to the smart-phone through the bluetooth module. The exclusive application in the smart-phone displayed the results of the amount of food intake, calorie intake, and eating rate. Through this system, subjects could continuously monitor their dietary intake & eating rate and recognize their actual eating environment, which leads to prevent overconsumption of food intake & form balanced eating habits. Based on this system, we need to consolidate and develop a weight control program.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1685-1691
• /
• 2004

This paper describes the fault detection and failsafe logic to be used in an Electronic Stability Program(ESP). The aim of this paper is to prevent of erroneous controls in the ESP. Developed this paper introduces the fault detection logic and evaluation of residual signals. The failsafe logic consists of four redundant sub-models, which can be used for detecting the faults in various sensors (yaw rate, lateral acceleration, steering wheel angle). We present two mathematical residual generation methods : one is a method using the average value and the other is a method using the minimum value of the each residual. We verified a failsafe logic developed using vehicle test results also we compare vehicle model based simulation results with test vehicle results.

• Korean Journal of Human Ecology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2007

The purpose of this study was to analysis on the victims of sexual violence. Data was obtained from the interview resources between January 2001 and June 2003. Data were analyzed using SPSS program. The major findings of this study were as follows. The most of sexual violence was female. The sexual violence occurred mainly from victim circumference but, the report was low. Type of sexual violence was many rape and sexual harassment. Therefore, sexual violence victims mainly visited an obstetric & gynecologic clinic. Injuries of sexual violence were physical (rupture of the hymen and vaginal injury), psychological (phobia, anxiety and confusion) and sexual (retire from the world) injuries. The results will be useful to furnish a guideline for prevent sexual violence.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2013

Even if transmissions through normal channel between ubiquitous devices and terminal readers are encrypted, any extra sources of information retrieved from encrypting module can be exploited to figure out the key parameters, so called side channel attack. Since side channel attacks are based on statistical methods, making side channel signal weak or complex is the proper solution to prevent the attack. Among many countermeasures, shielding the electromagnetic signal and adding noise to the EM signal were examined by applying different thicknesses of thin films of ferroelectric (BTO) and conductors (copper and gold). As a test vehicle, chip antenna was utilized to see the change in radiation characteristics: return loss and gain. As a result, the ferroelectric BTO showed no recognizable effect on both shielding and adding noise. Cu thin film showed increasing shielding effect with thickness. Nanometer Au exhibited possibility in adding noise by widening of bandwidth and red shifting of resonating frequencies.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.96-105
• /
• 1992

The use of fixed-point digital signal processors, such as the TMS 320C25, requires scaling of data at each arithmetic step to prevent overflows while keeping the accuracy. A software which automatizes this process is developed for TMS 320C25. The programmers use a model of a hypothetical floating-point digital signal processor and a floating-point format for data representation. However, the program and data are automatically translated to a fixed-point version by this software. Thus, the execution speed is not sacrificed. A fixed-point variable has a unique binary-point location, which is dependent on the range of the variable. The range is estimated from the floating-point simulation. The number of shifts needed for arithmetic or data transfer step is determined by the binary-points of the variables associated with the operation. A fixed-point code generator is also developed by using the proposed automatic scaling software. This code generator produces floating-point assembly programs from the specifiations of FIR, IIR, and adaptive transversal filters, then floating-point programs are transformed to fixed-point versions by the automatic scaling software.

• The Journal of Society for e-Business Studies
• /
• v.15 no.1
• /
• pp.1-16
• /
• 2010

Confidentiality is one of the most important requirements of information protection systems. The access control technique has been used to provide confidentiality, but it has fundamental problems in that it cannot prevent violations of confidentiality committed by authorized users. Information flow control is a technique introduced to resolve such problems, and many approaches based on programming languages have been proposed. However, it is not easy for a programmer to implement the technique at the source code level. Furthermore, the practicality of information flow control is difficult to demonstrate because it does not provide control over programs that have already been developed. This paper proposes a method that enables a practical information flow control through using a protected area, a separate part of computer system storage. Case studies are given to show its usefulness.

• Journal of muscle and joint health
• /
• v.18 no.1
• /
• pp.5-15
• /
• 2011

Purpose: Osteoporosis is often considered as a women's disease, but men's osteoporosis is also increasingly recognized as an important public health problem. This study was carried out to identify the important modifiable risk factors for osteoporosis in men. Methods: Two hundred and fourteen men were selected among those who checked bone mineral density by dual energy x-ray absorptiometry in lumbar vertebrae from June to September, 2009 at 3 general hospitals in Busan. Self-administrated questionnaires and BMD results of lumbar vertebrae were used for data. Collected data were analyzed by using SPSS 14.0 program. Results: The sports activity level in 30's, body weight, and fracture history of mother were the most powerful influencing factors on the bone mineral density of lumbar vertebrae. Conclusion: These results highlight the need to participate vigorously in sports activity during 30s as a means of increasing peak bone mass in lumbar vertebrae in order to prevent osteoporosis and fracture in men.