• Fisheries and Aquatic Sciences
• /
• 제13권1호
• /
• pp.1-11
• /
• 2010

The study was performed to optimize the processing conditions (alkali concentration, extraction time, and temperature) for rockfish skin gelatin based on yield using response surface methodology and comparison of the physicochemical properties with those of rockfish skin gelatin pretreated and extracted under ordinary conditions (alkali treatment concentration: 1.0 M; extraction time: 2 hr; extraction temperature: $60^{\circ}C$). Predicted maximum gelatin yield of 19.1% and gelatin content of 87.8% were obtained by extraction at $106.6^{\circ}C$ for 69.0 min after pretreatment with 1.1 M calcium hydroxide. Yield of gelatin extracted under high temperature/high pressure (G-HT/HP) was 54% higher than that extracted under ordinary temperature/time (G-OT/T). However, G-HT/HP was inferior in gel strength and gelling point to (G-OT/T), but comparable in transmission. Based on the physicochemical properties, G-HT/HP was unsuitable for use in products requiring higher physical properties, but could be useful for health-functional foods.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2023년도 임시총회 및 춘계학술대회
• /
• pp.23-23
• /
• 2023

The Hairy labrador tea (Ledum palustre L. var. diversipilosum Nakai) is a evergreen small shrub, belonging to the Ericaceae and mainly distributed along the alpine areas of Hamgyeong-do in North Korea. Through seed physiological research on North Korean plants, we intend to obtain basic data for the development of mass propagation methods and use them for vegetation restoration. The internal and external morphological characters of the seed were observed using scanning electron microscopy or stereoscopy, and full seeds were selected through X-ray test. Seeds were cultured on a growth condition at 15/6℃ and 25/15℃ to examine the germination response according to temperature, and the number of germinated individuals was examined every 24 hours to calculate germination percentage and mean germination time. Low-temperature treatment (4℃) and hormone treatment (GA3) were performed to investigate the effect of dormancy breaking, and analysis of variance (ANOVA) was performed on the experimental results using SAS 9.4. The seeds of the Hairy labrador tea were elliptical-narrow in shape, and the epidermal cell wall pattern was reticulated. The final germination rate (FGP) was the highest at 58.9% under the condition of low temperature treatment at 25/15℃. The average number of days to germination (MGT) was the highest at 25.1 days without treatment at 15/6℃, and the average of the last germination days was confirmed to be about 13 days. As a result of low temperature treatment, it was confirmed that the final germination rate (FGP) increased by 43.3%. The significance of the final germination rate (FGP) was verified according to the pretreatment at 25/15℃.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.243-243
• /
• 2009

Bi2O3 doped ZnO nanostructures structure were successfully synthesized by a thermal evaporatiion process and their structural characteristics were investigated. It is demonstrated that the growth condition such as the areal density, pretreatment of the substrates and growth temperature have great influence on the morphology and the alignment of the nanorods arrays. The density of Bi2O3 doped ZnO nanostructures is controlled by the gold (Au) nanoparticle density deposited on the silicon substrates. Relatively homogenous size and shape were observed by introducing gold(Au) seed-layer as nucleation centers on the substrates prior to the VLS reaction. The samples were characterized by X-ray diffraction, scanning electron microscopy.

• 한국의류학회지
• /
• 제37권4호
• /
• pp.590-597
• /
• 2013

This study examined the change in the dyeability of natural dyes on cotton fabrics by a PEI (polyethyleneimine) pretreatment instead of mordants. Cotton fabrics were treated with PEI and the changes in the dyeability were shown by measuring the amount of PEI on cotton fabrics. Samples treated with PEI were dyed with two natural polychromatic dyes with a different affinity to cotton fibers: Alizarin Red S and Curcumin. The changes in dyeability by three variables (time, temperature and concentration of dyes) on cotton fabrics were analyzed by the K/S value to define optimum dyeing conditions. Subsequently, the PEI treatment improved the dyeability of cotton fabrics with both dyes of low and high affinity to cotton fibers. Thus, PEI could be a suitable heavy metal mordant replacement.

• 한국미생물·생명공학회지
• /
• 제25권1호
• /
• pp.51-55
• /
• 1997

To utilize the alkaline protease produced by Halomonas sp. ES-10 as an enzyme detergent, the crude enzyme was obtained by methanol precipitation and lyophilization. And it was processed to coated enzyme.The best mixing ratio of components such as coated enzyme, builders, actives, fillers and adjuvants on detergency was examined, and temperature and pH influencing detergency were also tested. Detergency test 0.15% detergent solution was carried out on EMPA test cloth #116 with shaking(90 rpm) for 10 min after 30 min of pretreatment. The detergent which contained coated-enzyme 1%, Zeolite 4A 20%, Tween 80 1. 5%, sodium borate 30%, sodium meta silicate 7.5% and water 40% showed about 90% of washing efficiency at 40$\circ $C and pH 10.0.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.396-402
• /
• 1992

Carbon solid was prepared from dormant mesophase pitch (DMPP) without using a binder and its properties were characterized. DMPP powder was stabilized with air or nitric acid in pretreatment stage so that it might not soften in later heat ttreatment stage. Optimum sintering properties were obtained from carbon powder with 2.36∼2.38 of C/H atomic ratio and 1.27∼1.40 of C/O atomic ration in air stabilization. In nitric acid stabilization, optimum sintering properties were obtained when 20∼40 vol.% of nitric acid solution was used. Compressive strength increased up to 1200$^{\circ}C$ of heat treatment temperature, and the highest compressive strength and bulk density of carbon solid from DMPP were 3000 kgf/㎤, respectively. The optical properties of carbon solid obtained was fine mosaic structure. Carbon solid after graphitization showed the properties of hard carbon due to stabilization and its shore hardness was 120.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.418-421
• /
• 2009

Effects of aqueous ammonia soaking to three annual plants (hemp woody core, tobacco stalk and corn stover) awere investigated to focus on the enzymatic saccharification characteristics change by this treatment. At two different levels of treatment ($90^{\circ}C$-16 h and $45^{\circ}C$-6 days), higher temperature treatment led to more enzymatic saccharification of cellulose to glucose by commercial cellulase mixtures (Celluclast 1.5L and Novozym 342 from Novozyme Korea). Difference among annual plants were significant. corn stover was the best response to enzymatic saccharification of cellulose and xylan by comercial enzymes all treatment conditions but tobacco stalk was the worst response to all of them. chemical composition or physical structure difference may brought this difference.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.15-21
• /
• 1996

Friction and wear properties of MoS$_2$ bonded films were studied using the Falex testing machine, and their properties were evaluated in terms of the life and the load carrying capacity of the films. MoS$_2$ bonded films were formulated from the mixtures of MoS$_2$ solid particles and epoxyphenol resin, and they were applied onto AISI 4130 steel surface by dipping method to form lubricating bonded films. The results of the life and the load carrying capacity of the films showed that films were mainly affected by the surface temperature arisen from the frictional heat at the contact surface. To obtain enhanced tribological properties of the films, various combinations of solid lubricants and additives with a basic polymer resin were attempted and evaluated. The effects of surface pretreatment, such as sand blast or Zn-phosphating, were also investigated.

• 에너지공학
• /
• 제20권3호
• /
• pp.252-258
• /
• 2011

Nickel fiber mat was investigated as a potential structured catalyst for steam reforming of biogas in the temperature range of $600-700^{\circ}C$. The activity of as-received catalyst was very low owing to the smooth surface of fibers. Pretreatment of the catalyst by oxidation followed by reduction under methane partial oxidation condition significantly improved the catalytic activity, although degradation of the activity was found during the reaction due to oxidation and sintering. This deactivation was retarded by supplying additional hydrogen in the inlet gases or by coating $CeO_2$ over the catalyst surfaces.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.781-788
• /
• 2007

The Carbon source to enhance the denitrification is essential matter in the advanced sewage treatment. For the high level of nutrient removal, external carbons such as ethanol, methanol, volatile fatty acids and so on should be needed. In this study, the methods to increase the sludge solubilization and acidification rate were compared with waste activated sludges and food waste leachate. Ultrasonication and acids were used for the pretreatment of organic particles in sludges. As a results, the optimal temperature and HRT were $60^{\circ}C$ and 5 days, respectively. HAc, HPr, HBr, and other VFAs for acid fermentations reduced up to 22, 16, 14, and 48% with HRT reduction. For the increase of solubilization, 28% of solids destruction rate was shown at 0.3 watts/mL.