• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1059-1065
• /
• 2020

Demand for pressure sensors is increasing in various fields such as machinery, healthcare and medical care. A recent study is being conducted to create sensors that are more sensitive and have longer linear sections based on measurement principles. In this paper, a film-type sensor with a membrane structure was developed to measure the pressure distributed in the axial direction of a hot roll laminator. Performance of sensors was evaluated by resistance and durability according to membrane diameter. The resistance of the membrane sensor varies according to the contact state and contact area of the electrode. Therefore, the membrane diameter selection is important. Experiments showed the most pronounced variation in resistance under pressure at 8 mm in diameter of membrane. Reliability evaluation of sensors was carried out at room temperature and high temperature. The pressure on the sensor was pressurized 1000 times to measure the initial resistance and the resistance after the evaluation to analyze the change. Sensors showed stable results with low resistance changes of 5.15% and 6.27%, respectively. A large area sensor manufactured using the developed sensor also showed reliable results.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.919-925
• /
• 2006

An accurate mathematical model for complex stiffness of the pneumatic spring would be necessary for an efficient design of a pneumatic spring used in vibration isolation tables for precision instruments such as optical devices or nano-scale equipments. A diaphragm, often employed for prevention of air leakage, plays a significant role of complex stiffness element as well as the pressurized air itself Therefore, effects of the diaphragm need to be included in the dynamic model for a more faithful description of dynamic behavior of pneumatic spring. But the complex stiffness of diaphragm is difficult to predict In an analytical way, since it is a rubber membrane of complicated shape in itself. Moreover, the diaphragm should be expandable in response to pressurization inside a chamber, which makes direct measurement of complex stiffness of diaphragm extremely difficult. In our earlier research, the complex stiffness of diaphragm was indirectly measured, which was just to eliminate the theoretical stiffness of pressurized air from the measured complex stiffness of the pneumatic spring. In order to reflect complex stiffness of inflated diaphragm on the total stiffness at the initial design or design improvement stage, however. it is required to be able to predict beforehand. In this paper, how to predict the complex stiffness of inflated rubber diaphragm by commercial FE codes (e.g. ABAQUS) will be discussed and the results will be compared with the indirectly measured values.

• 멤브레인
• /
• 제24권3호
• /
• pp.194-200
• /
• 2014

본 연구의 목적은 대기공 정밀여과(Large Pore Micro-Filtration, LPMF)막의 수처리 응용을 위한 실험실 규모에서의 성능을 평가한 것으로 이를 통해 문제점 및 해결방안을 제시하는 것이다. 본 연구에 사용된 평균 기공이 $5{\mu}m$ LPMF막은 PET Braid가 보강되어 있는 PVDF 재질의 외압형 중공사막으로 여과실험은 30 cm의 수두차 혹은 1.5 bar 이하의 압력차로 수행하였으며, 역세는 여과수에 압축공기로 약 4 bar의 압력을 가한 후 수초 내에 순간 역세하는 가압역세였다. 0.2 bar의 TMP (Trans Membrane Pressure)에서 $0.05{\mu}m$ UF로 전처리한 시수로 $0.4{\mu}m$의 MF와 flux를 비교한 결과 UF에 비해 LPMF의 flux가 약 2배 정도 높았으며, 동일한 시수에 대해 15~30 cm의 수두차에 따른 flux를 측정한 결과 30 cm 수두차에서 800 LMH 이상의 높은 flux를 확인하였다. 또한 여과수의 탁도 향상과 여과 flux의 안정적 유지를 위해 여러 가지 무기응집제에 대한 $5{\mu}m$ 기공의 여지를 이용한 Time-To-Filter (TTF)를 통해 적정 응집제 및 그 주입량을 결정하였다. 고농도 무기응집제 주입 및 30 cm 이상의 수두차로 LPMF를 중력식으로 운전하였을 때 flux는 80 LMH 이상이었고, 탁도 제거율은 93.5~99.5%이었다. 특히 약 4 bar의 압력의 순간 가압역세를 한 결과 막의 충진율이 19%인 경우 여과수의 회수율을 약 97%로 유지하면서도 여과 flux가 안정적으로 유지되었으나, 막충진율을 약 43%인 경우 순간 가압역세만으로는 역세가 불안정하였던 관계로 여과압력이 지속적으로 상승하는 등의 여과공정이 불안정한 문제점을 보였다.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.403-408
• /
• 2017

In these days, wastewater reclamation and seawater desalination play essential role in addressing the challenge of worldwide water scarcity. Particularly, reverse osmosis (RO) for seawater desalination process is commonly used due to less energy consumption than conventional thermodynamic systems. However, membrane fouling and electrical energy consumption during operation of RO system for seawater desalination haver continued to be a obstruction to its application. In this study, therefore, wastewater secondary effluent is used for osmotic dilution of seawater. Firstly, fouling behaviour of RO by simulating wastewater effluent in osmotic dilution process was measured and we calculated energy consumption of overall desalination process by theoretical equations and commercial program. Our results reveal that RO membrane fouling can be efficiently controlled by pre-treatment systems such as nano filtration (NF) or forward osmosis (FO) process. Especially FO system for osmotic dilution process is a non-pressurized membrane system and, therefore, the operating energy consumption of overall desalination system was the lowest. Moreover, fouling layer on FO membrane is comparatively weak and reversible enough to be disrupted by physical cleaning. Thus, RO system with low salinity feed water through FO process is possible as a less energy consuming desalination system with efficient membrane fouling control.

• Nuclear Engineering and Technology
• /
• 제38권5호
• /
• pp.449-454
• /
• 2006

Neutron imaging technique was used to investigate the water distribution and movement in Polymer Electrolyte Membrane Fuel Cell (PEMFC) at HANARO, KAERI. The Feasibility tests were performed in the first and second exposure rooms at the neutron radiography facility (NRF) at HANARO in order to check the ability of each exposure room, respectively. The feasibility test apparatus was composed of water and pressurized air before making up the actual test apparatus. Due to the low neutron intensity in the second exposure room, the exposure time was too long to investigate the transient phenomena of PEMFC. Although the exposure time was improved to 0.1 sec in the first exposure room, it was difficult to discriminate detail water movement at the channel due to the high noise level. Therefore, the experimental setup must be optimized according to the test conditions. Water discharge characteristics were investigated under different flow field geometries by using feasibility test apparatus and the neutron imaging technique. The water discharge characteristics of a 3-parallel serpentine are superior to those of a 1-parallel serpentine, but water at Membrane Electrode Assembly (MEA) was not removed, regardless of the flow field type.

• 유공압시스템학회논문집
• /
• 제4권3호
• /
• pp.7-12
• /
• 2007

This paper presents an energy saving hydrostatic pressure exchanger for sea water desalination equipment. In a reverse osmosis(RO) system for desalinating sea water, more than 70 percent of the supplied sea water, brines which were impassable through RO membrane are bypassed, resulting in high energy losses. In this paper, a hydrostatic pressure exchanger consisting of an embedded water hydraulic piston motor and a water hydraulic piston pump was proposed and investigated in order to recover the energy of the bypassed brines. The pressurized brines are supplied to the embedded water hydraulic piston motor as power sources and the water hydraulic piston pump is driven by the output torque of the embedded water hydraulic piston motor as well as electric motor. Consequently, the energy of the bypassed brines can be recovered. To examine the electric energy saving characteristics of the hydrostatic pressure exchanger, a simulation model was constructed using commercial software and experiments were conducted. Through the results of simulation and experiment, the feasibility of the electric energy saving effect of the proposed hydrostatic pressure exchanger was investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.85.1-85.1
• /
• 2011

In this study, Grafoil$^{TM}$ which has comparable electric resistance and chemical stability but is flexible, fragile, and cheap material was adopted as bipolar plates for proton exchange membrane fuel cell(PEMFC) having only one straight line flow channel. Because of its flexibility, pressurizations of cell with various pressures showed different operating characteristics compared to ordinary graphite-used PEMFC. While performances of both cells decreased as these were pressurized, investigation of ohmic and faradaic resistance by electrochemical impedance measurement indicated different tendency of change. Ohmic resistance of graphite-used cell increased with increasing pressure, which is reversed in Grafoil$^{TM}$-used cell. It is speculated that effective chemical reaction area is decreased with increasing pressure in case of graphite-used one, but because of flexible property of Grafoil$^{TM}$, gas diffusion layer in Grafoil$^{TM}$-used cell was well-activated. Different rate of change of faradaic resistances in both cells support this supposition. However, although optimum point of pressurization is found, it is required to investigate other operating conditions because of low performance compared to graphite-used cell.

• 대한환경공학회지
• /
• 제36권7호
• /
• pp.492-497
• /
• 2014

해수담수화 시설에서 전처리와 역삼투막(reverse osmosis, RO) 공정의 유기물 제거특성을 살펴보고, 유기물의 특성변화가 막오염 지수에 미치는 영향을 조사하였다. 연구에서 비교된 전처리 공정은 다중여재여과(dual media filter, DMF), 가압형 정밀여과(MF), 침지형정밀여과(SMF) 이다. 유기물의 특성변화를 알아보기 위해 원수와 공정별 처리수의 탁도, $UVA_{254}$, DOC, size exclusion chromatography (SEC), fluorescence excitation emission matrix (FEEM), transparent exopolymer particles (TEP) 등을 분석하였다. 이온성 물질과 무기물 항목은 전처리 공정의 종류에 관계없이 처리되지 않았고 RO공정을 거치면서 99% 이상 제거되었다. 유기물에 의한 막오염에 큰 영향을 미치는 소수성 유기물은 전처리를 통해 상대적으로 제거가 용이하였다. 전처리 공정의 유기물 제거율은 막여과 공정(MF, SMF)이 기존 DMF 공정에 비해 높았다. 처리수내 유기물의 농도가 감소할수록 막오염지수 중 하나인 silt density index (SDI) 값도 감소하였다. MF로 전처리한 경우 SDI값이 가장 낮게 나타났는데, 처리수 내의 $0.1-0.4{\mu}m$ TEP 농도가 MF와 SMF 막오염지수의 차이와 상관관계를 보였다.

• 한국세라믹학회지
• /
• 제36권3호
• /
• pp.244-254
• /
• 1999

폐윤활유 재생용 TiO2 한외여과막은 정밀영과용 지르코니아 복합막(즉, 복층담채) 및 알루미나 단층 담체(기공크기 0.1$mu extrm{m}$)상에 졸-겔 코팅법에 의하여 TiO2 분리막 층을 코팅하여 제조 하였다. TiO2 졸의 특성 분석을 통하여 봉입침지(sealed dip-coating) 및 가압 코팅(pressurized coating)법으로 결함이 없는 TiO2 복합막을 제조할 수 있는 코팅조건을 최적화 하였다. 합성 TiO2 한외여과막의 분리막층 두께는 1$\mu\textrm{m}$이하의 범위에서 조절되었으며,기공값을 보여주었으며 75$0^{\circ}C$까지 열처리하여도 80%정도의 용질배제율(기공크기 22.5nm)을 유지하는 점으로 봐서 고온 공정을 요하는 폐윤활유 재생막으로서 충분한 열적 안정성을 갖고 있었다.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.118-125
• /
• 1992

Theoretical equations for hoop stress, longitudinal or meridian stress and Von Mises stress of an axismmetric conical pressure vessel and a frustum of conical pressure velle, both of which are pressuized by hydrostatic loading, are derived from equilibrium equations. The membrane stresses conputed by theoretical equations for a conical pressure vessel and a frustum of conical pressure vessel are compared with the values obtained from finite elelment method. Based on the fact that the computational values by theoretical equations are well agreed with the finite element results, derived equations are proved to be valid and it is possible for those equations to be conveniently used for structural analysis or design of frustum of conical pressure vessel which is a part of silo body.