• 제목/요약/키워드: Pressuremeter

검색결과 63건 처리시간 0.019초

자가굴착식 프레셔미터 시험을 이용한 비배수 전당강도 산정 (Determination of Undrained Shear Strength of Clayey Soils from Self-Boring Pressuremeter Test)

  • 장인성;권오순;정충기;김명모
    • 한국지반공학회논문집
    • /
    • 제16권6호
    • /
    • pp.117-125
    • /
    • 2000
  • 자가굴착식 프레셔미터 시험(Self-Boring Pressuremeter Test, SBPT)은 지반의 교란을 최소화할 수 있기 때문에 점성토의 비배수 전당강도($S_{u}$ )를 비교적 정확하게 평가할 수 있는 방법 중의 하나로 알려져 있으며, 많은 연구자들에 의하여 SBPT 결과로부터 $S_{u}$ 를 산정하는 여러 가지 방법들이 제안되었다. 본 연구에서는 국내 5개지역에서 총 33회의 SBPT를 수행한후, 기존에 제안된 여러 가지 방법들을 이용하여 $S_{u}$ 를 산정하고, 그 중 변형률 경화 거동을 보이는 지반에서의 $S_{u}$ 를 동일 현장에서 수행한 현장베인시험 결과와 비교. 분석하여 각 방법들의 적용성과 신뢰성을 분석하였다. 그리고, $S_{u}$ 산정 결과에 대한 프레셔미터 멤브레인의 유일한 길이의 영향을 수치해석으로 분석하였으며, 그 결과를 이용하여 기존의 접선영 방법(Subtangent method)을 보정하는 식을 제안하였다. 새로이 보정된 방법으로 산정한 $S_{u}$ 를 현장베인시험 결과와 비교하여 개선 효과를 확인하였다.

  • PDF

프레셔미터 시험을 이용한 사질토 지반의 최대 전단탄성계수 결정 (Determination of Maximum Shear Modulus of Sandy Soil Using Pressuremeter Tests)

  • 권형민;장순호;정충기
    • 대한토목학회논문집
    • /
    • 제28권3C호
    • /
    • pp.179-186
    • /
    • 2008
  • 프레셔미터 시험은 지중 내 설치된 프루브를 통해 지반에 압력을 가하여 지반의 변형특성을 평가하는 시험 방법으로, 주로 경험적인 상관관계를 통하여 지반의 변형계수를 평가하는 여타의 현장 시험방법들과 달리 하중에 따른 변위 곡선에 기초하여 지반의 변형특성을 직접적으로 평가할 수 있는 시험 방법이다. 그러나, 자가 굴착 방식을 사용하더라도 시험체의 관입에 따른 교란이 발생하기 때문에 초기 재하 시험곡선으로부터 지반의 변형특성을 평가하는 것은 부적절할 수 있으며, 이에 대한 대안으로 하중 제하-재재하 곡선을 이용하는 방법 등이 제안되어 사용되고 있다. 그러나, 공내 재하 압력 및 공벽의 변위 측정 시에 발생하는 데이터의 분산과 계측 장비의 해상도 문제로 인하여 하중 제하-재재하 곡선으로부터 최대 전단탄성계수와 같은 미소 변형 영역에서의 변형 특성을 평가하기에는 많은 제약이 따른다. 본 연구에서는 하중 재재하 곡선의 회귀분석 및 이를 바탕으로 한 외삽법을 사용하여 미소 변형 영역에서 지반의 최대 전단탄성계수를 직접적으로 평가할 수 있는 해석 방법을 제안하였다. 또한, 하중 재재하 시 원지반에 비하여 증가하는 응력 수준을 초기 응력 수준에 맞도록 고려할 수 있는 방법을 함께 제안하고 있다. 대형 압력 토조를 이용하여 다양한 상대밀도 및 응력 조건을 가지는 모래 지반을 조성한 뒤, 프레셔미터 시험 및 벤더 엘리먼트 시험을 수행하였고, 제안된 해석 방법의 적절성을 기존의 경험식들 및 벤더 엘리먼트 시험에서 얻어진 값들과 비교, 검증하였다.

국내 화강 풍화대 지반의 표준관입시험 N 값과 프레셔미터시험 결과의 상관관계에 대한 사례 분석 (Case Study of Correlation between the SPT-N Value and PMT Results Performed on Weathered Granite Zone in Korea)

  • 이승환;백성하;송영우;정충기
    • 한국지반공학회논문집
    • /
    • 제35권12호
    • /
    • pp.15-24
    • /
    • 2019
  • 국내 다수의 지역에 분포하는 화강 풍화대 지반은 지반구조물의 주요 지지층으로 활용되고 있으므로 화강 풍화대의 지반특성을 평가하는 것은 중요하다. 풍화대 지반은 실내시험을 위한 불교란 시료를 채취하는 것이 어렵기 때문에 일반적으로 표준관입시험(SPT: Standard penetration test)을 통해 지반특성을 평가하고 있다. 프레셔미터시험(PMT: Pressuremeter test)은 풍화대 지반의 응력 - 변형률 거동을 신뢰도 높게 평가하는 대표적인 현장시험이지만 소요 시간과 비용의 제약으로 제한적인 시험만을 수행하고 있다. 본 연구에서는 화강 풍화대에서 수행된 SPT-N60 값과 PMT 결과의 상관성 분석을 수행하였으며, N60 - Em(Em: Pressuremeter modulus)과 N60 - PL(PL: Limit pressure) 관계식을 제안하였고 선행 연구 결과와 비교 분석하였다.

공내재하시험을 이용한 제주 현무암의 p-y 곡선 연구 (A Study on p-y Curves with Pressuremeter Tests in Jeju Basalt Rock)

  • 양기호;허종철;박정준
    • 한국지반신소재학회논문집
    • /
    • 제14권4호
    • /
    • pp.129-137
    • /
    • 2015
  • 최근 해상풍력발전 단지 조성은 많은 양의 에너지를 창출할 수 있어 그 기대는 점차적으로 증가하고 있다. 특히 제주도는 풍황이 우수하여 해상풍력발전 시스템 운영을 위한 최적의 대상지이기는 하나, 화산활동에 의해 형성된 지형으로 육지부와 달리 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 이에 본 연구에서는 프레셔미터 시험으로부터 제주 현무암에 근입된 수평재하말뚝의 p-y 곡선을 유도하기 위하여 프랑스석유협회(IFP, 1983)과 Briaud et al.(1983)의 방법을 이용하였다. 이들의 방법을 이용하여 유도된 p-y 곡선을 LPILE 프로그램에 입력하여 말뚝두부에서 하중-변위 관계를 분석한 후 재하시험으로 측정된 하중-변위 곡선과 비교하였다. 결과, pressuremeter test로부터 제주 현무암에 근입된 수평재하말뚝의 p-y 곡선을 유도할 때 IFP 방법은 매우 합리적인 결과를 도출할 수 있을 것으로 판단된다.

수평재하시험 결과를 이용한 말뚝의 수평방향 지반반력계수 예측에 관한 연구 (A Study on Prediction of the Coefficient of Horizontal Subgrade Reaction for Pile Using Lateral Pile Loading Test Results)

  • 천병식;서덕동;이용재
    • 한국지반환경공학회 논문집
    • /
    • 제7권2호
    • /
    • pp.15-24
    • /
    • 2006
  • 본 연구에서는 수평재하시험과 공내수평재하시험 결과를 이용하여 지반반력계수를 각각 분석하였다. 또한 이들 값과 수평재하시험 실시 위치에서의 N치를 이용하여 도로교표준시방서, 일본토목학회, Hukuoka식, 일본도로협회 제안식으로 산정한 수평방향 지반반력계수를 비교 및 분석하여 제안식별 적용성을 평가하고자 하였다. 수평방향 지반반력계수 산정시 지반의 변형계수가 큰 영향을 미치는 것으로 볼 때 합리적인 지반의 변형계수 산정이 매우 중요하며, 제안식별 변형계수 적용에 대해 재하시험 결과를 이용하여 검토하였다. 특히 공내수평재하시험 결과를 이용하여 지반반력계수를 산정하는 방법은 수평변위를 고려할 수 없는 등의 문제점이 있는 것으로 나타나 사질토 지반의 수평방향 지반반력계수 산정시 말뚝의 직경과 수평변위를 고려할 수 있는 식을 제안하였으며, 아울러 N치를 이용한 지반의 변형계수를 고려하는 제안식에 대해서는 수평재하시험과 비교하여 지반의 변형계수 추정식을 제안하였다.

  • PDF

유한요소해석을 이용한 SBP 시험의 결과해석 - 점성토 지반의 압밀특성 (Numerical analysis of Self-Boring Pressuremeter test results using FEM - Consolidation characteristics of clay)

  • 장인성;정충기
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.67-74
    • /
    • 1999
  • Self-Boring Pressuremeter Test(SBPT) is known to be the most effective in-situ test method which can reliably determine consolidation characteristics as well as deformation modules and untrained shear strength. In order to derive the coefficient of consolidation using SBPT results it is necessary to obtain the dissipation behavior from the pore pressure change with time during constant radial strain(generally 10%) and to derive the reliable time factor(Τ) from the analytical method which considers the real in-situ conditions. As previous studies on time factor are based on the assumptions of plane strain condition that the membrane of SBP is infinite, of untrained condition during the expansion of the probe and of elastic soil behavior during consolidation, these analyses can't consider the real boundary conditions and the real soil behaviour. In this study, consolidation analysis similar to real in-situ conditions including test procedure is conducted using finite element program which employs MCC model and Biot theory. Time factor considering the effects of finite membrane length, the total pressure change during consolidation and partial drainage is proposed and compared with previous results.

  • PDF

화강풍화토 지반에 타설된 가드레일 지주의 횡방향 거동 분석 (Analyses of Horizontal Behavior of Guardrail Posts Installed in Compacted Weathered Granite Soil)

  • 임유진;누엔티엔 하이
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.41-48
    • /
    • 2005
  • A small scale impact apparatus, pressuremter and soil chamber were used to investigate horizontal behavior and bearing capacity of the steel guardrail post installed in compacted soil. A useful test and data reduction method for pressuremter was developed to evaluate soil parameters of surrounding soil and stability of the post. From the analyses of the PMT, horizontal bearing capacity of the post impacted by a boggie was 12.7% bigger than that of the post with static loading. The increased horizontal bearing capacity is due to generated inertia force that is dependent on the shape of failed soil wedge around the post. P-y curves were obtained from the pressuremeter test and were applied to a finite difference program which predicted a load-deflection and a bending moment contours along the post.

  • PDF

공내재하시험을 이용한 지반정수 평가 (Evaluation of Soil Properties using Pressuremeter Test)

  • 한상연;장서만;전성곤;이종규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.175-182
    • /
    • 2001
  • The PMT test results are compared with other in situ test such as Standard Penetration Test (SPT), Cone Penetration Test (CPT), Field Vane Test (FVT) and the laboratory test in order to investigate the correlationships for the strength parameters obtained from Busan and Incheon areas. Many proposed correlation formulas also make a comparative study and new correlation formulas for domestic soils are introduced. Limit pressure ( $P_1$) could be determined by P-log($\Delta$V/V) and Relative volume Method. PMT for the granular soils showed relatively high correlation with SPT, while CPT has good correlation with PMT for cohesive soil. The predicted undrained shear test ( $S_{u}$) by the PMT test results for Incheon and Busan samples showed low correlativity with proposed equations, therefore, new correlation formulas are proposed for domestic soils.s.

  • PDF