• 한국세라믹학회지
• /
• 제38권4호
• /
• pp.380-387
• /
• 2001

140$0^{\circ}C$ 환원 분위기(질소-수소) 조건에서 열처리하여 반도성 SrTiO$_3$하소분말을 제조하였다. 하소분말을 이용하여 135$0^{\circ}C$에서 2시간동안 상압 소결하여 소결체를 제조하였으며, 이때 소결 분위기에 따른 소결체 입계의 전기적 특성을 고찰하였다. 이들 소결체는 전형적인 바리스터 특성을 나타내었으며, 특히 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라서 소결체의 문턱 전압, 입계 비저항 그리고 입계 전위 장벽은 430V/cm, 10MΩ.cm 그리고 2.0$\times$$10^{-3}$eV로부터 1000V/cm 이상, 240 MΩ.m 그리고 1.1eV로 변하였다.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.288-293
• /
• 2004

The application concept of using a fail safety filter on the filtering system is to prevent the particle leakage when the main filter element is broken at high temperature. In this study, the metal filters were fabricated by pressureless sintering method. The mixture of stainless steel powders and filler metal binder solved in the water solutions of 5% PVA was compacted to form the cylindrical filter without pressure. The compacted filter were sintered in the vacuum sintering furnace at 120$0^{\circ}C$ for 1 hour. The metal filter(produced with powder of 640-840 ${\mu}m$ size) having more than above 50% porosity, 500${\mu}m$ pore size, and permeability of 7.3${\times}$10$^{-11}$m$^{2}$ plugged within 2.5 minute to prevent the leakage of maximum slip particle size of less than 3${\mu}m$.

• 한국세라믹학회지
• /
• 제29권6호
• /
• pp.471-479
• /
• 1992

AlN powder was synthesized by carbothermal reduction and nitridation using Al2(SO4)3.18H2O as the starting material. The synthesized AlN powder was fine but contained oxygen. Therefore carbonaceous material (carbon black or phenol novolac) was added teogether with the sintering aids (CaO, CaF2, CaCl2, Y2O3 and YF3). It was found that pressureless sintering at 1700~180$0^{\circ}C$ after deoxidation at 150$0^{\circ}C$ suppressed the formation of second phase (27R) and reduced the contents of lattice oxygen within AlN ceramics.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.369-382
• /
• 1990

ZrO2-Toughened Alumina-Ceramics(ZTA) with Cr2O3 and HfO2 as addition were synthesized by assintering method for solid solution of Al2O3/Cr2O3 and ZrO2/HfO2, and were prepared by pressureless sintering at 1$600^{\circ}C$. The effects of Cr2O3 and HfO2 on the thermal and mechanical properties, the sintering mechanism, and the wearness between theory and experiment were investigated. Among three kinds of mechanisms such as stress-induced transformation, microcracking, and crack deflection it contributed to the ZTA system with a few exceptons according to composite. We show that wearness can be estimated sufficiently by HV and KIC through theory and experiment.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1999-2003
• /
• 2014

Indium tin oxide ($In_2Sn_{1-x}O_{5-y}$) nanoparticles were synthesized by hydrothermal method from stable indium tin acetylacetone complexes and postannealing at $600^{\circ}C$. The absence of chlorine ions shortened the synthesis process, decreased the particle agglomeration and improved the particle purity. The introduced complexing ligand acetylacetone decreased the obtained nanoparticle size. The improved powder properties accelerated the sintering of the $In_2Sn_{1-x}O_{5-y}$ nanoparticles and reached a relative density of 96.4% when pressureless sintered at $1400^{\circ}C$.

• 한국분말재료학회지
• /
• 제4권1호
• /
• pp.9-17
• /
• 1997

The mullite-zirconia composites were prepared by the pressureless sintering with addition of 10~20 vol% ZrO$_2$(TZ3Y) in the fused mullite and sol-gel mullite matrix. The densification rate of sol-gel mullite was higher than that of fused mullite, and the addition of ZrO$_2$(TZ3Y) was effective on the densification of fused mullite. The enhancement of densification and anisotropic growth of mullite in ZrO$_2$added specimen can be explained by the solid solution effect of $Zr^{+4}$ ion in mullite. Both mechanical strength and fracture toughness of mullite-zirconia composite were enhanced compared to those of mullite. The enhancement of mechanical properties is attributed to the hinderance of grain growth and the combined toughening effects of tetra-mono phase transformation and crack deflection due to the residual stress between mullite/ZrO$_2$.

• 한국분말재료학회지
• /
• 제2권3호
• /
• pp.216-222
• /
• 1995

$SiC/TiB_2$ composites of varying $TiB_2$ content from 0 to 52 vol.% were prepared by pressureless sintering. When these composites were sintered at $2150^{\circ}C$ the mechanical properties such as elastic modulus, strength and toughness increased with increasing $TiB_2$ content. On the other hand, at a sintering temperature of $2200^{\circ}C$, the mechanical properties reduced gradually with increasing $TiB_2$ content. The main reason was deduced from the onset of spontaneous microcracking and the critical particle size for microcracking was calculated approximately 5.6 $\mu\textrm{m}$.

• 한국세라믹학회지
• /
• 제37권12호
• /
• pp.1150-1158
• /
• 2000

반도성 SrTiO$_3$분말을 이용하여 상압에서 제조된 소결체의 소결 분위기에 따른 소결체 입계의 결함 화학 및 전기적 특성을 고찰하였다. 소결 분위기를 질소-수소, 질소, 공기로 변화시킴에 따라서 입계에서 O/(Sr+Ti)의 비는 1.6로부터 2.1로 증가하였으며, 또한 입계의 과잉 음전하층에서 전하 밀도는 1C/$ extrm{cm}^2$로부터 1.26C/$\textrm{cm}^2$로 증가하였다. 소결체의 문턱 전압, 입계 저항 그리고 입계 전위 장벽은 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라 6.40-1000 V/cm, 2.70-3050 kΩ 그리고 0.08-10.9 eV로 각각 증가하였다.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.347-358
• /
• 1994

Creep densification and grain growth of alumina powder compacts during high temperature processing were investigated. The creep densification and grain growth of alumina powder compacts during various sintering processes were analyzed by employing the consitutive model by Kwon and Kim. Theoretical results from the constitutive model were compared with various experimental data of alumina powder compacts in the literature including pressureless sintering, sinter forging and hot pressing. The proposed constitutive equations were implemented into finite element analysis program (ABAQUS) to simulate densification for more complicated geometry and loading conditions. The effects of friction between die and powder compact or punch and powder compact during sinter forging and hot pressing are investigated by using the finite element method. Also, high temperature forming processing of alumina compact with complicated shape was simulated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.282-283
• /
• 2006

Densification behavior of nano-agglomerate powder during pressureless sintering of Fe-Ni nanopowder was investigated in terms of diffusion kinetics and microstructural development. To understand the role of agglomerate boundary for sintering process, densification kinetics of Fe-Ni nano-agglomerate powder with different agglomerate size was investigated. It was found that activation energy for densification was lower in the small-sized agglomerate powder. The increase in the volume fraction of inter-agglomerate boundary acting as high diffusion path might be responsible for the enhanced diffusion process.