• Journal of Environmental Science International
• /
• v.15 no.1
• /
• pp.77-84
• /
• 2006

An effective technique of sludge separation is required for excess sludge of sewage or wastewater plant. The separation of bulking sludge of paper manufacturing plant was studied using DAF(Dissolved Air Flotation) system. The effects of parameters such as nozzle type, A/S(air/solid) ratio. pressure, injection time of pressured water and saturation time were examined. The results showed that the best nozzle type was flat which had small orifice hole, The optimum A/S ratio and pressure were $7.070\times10^{-3}$(recycle ratio of pressured water $20\%$) and 5atm, respectively. Injection times of pressurized water around 20-25 sesc and flotation time of 30 min appeared to be optimal for the DAF operation. The order of performance of packing was 18 mm > 22 mm > 32 mm.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.146-150
• /
• 2005

A comparative study of pretreatment and extraction methods was conducted to investigate their effects on nutritional and bioactive components during hot-water extraction of Acanthopanax senticosus. The herb samples, ground and sifted $(8\~20\;mesh)$ were pretreated with ultrasound (20 kHz), microwave (2,450 MHz) or roasting $(180^{\circ}C)$ for 10 min, and then extracted by a boiling $(180^{\circ}C)$ under atmospheric pressure or a pressured boiling $(121^{\circ}C)$ for 2 hr. In general, the pretreatments improved the extraction efficiency and the DPPH radical scavenging activity of extract. Particularly, the extraction yields of soluble solids, total sugar and phenolic compounds were increased in microwaving methods, and the protein yield and the radical scavenging activity were higher in roosting pretreatment. Yields of soluble solids, total sugar, protein and phenolic compouds in pressured extraction were higher than those in nonpressured extraction. These results suggested that pretreatment including microwave radiation, sonication and roasting and pressured extraction can be utilized for improving the extraction efficiency of A. senticosus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1322-1331
• /
• 2004

This paper presents studies on the design of water hydraulic system and components to replace oil with tap-water as the pressure transmission medium in hydraulic systems. In order to improve the performance of water hydraulic system, the thermal and hydraulic properties of tap-water are first investigated. Based on these characteristics, the design parameters, such as the clearances of the moving parts, the cross-sectional area of pipes and relative roughness, are proposed so that the performance of water hydraulic system is the same as that of oil. In addition, the operating ranges, which show the possibility of using water hydraulic system, are examined.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.130-134
• /
• 2005

This study was conducted to investigate the effects of pretreatment and extraction methods on the water extraction yields of sugar, protein and phenolic compounds, and the antioxidative activity of extract from Ganoderma lucidum. The herb was ground, sifted, and treated for 10 min with microwave (2,450 MHz) and ultrasound (20 kHz), and then extracted by boiling underatmospheric pressure and pressured boiling. Particle size $(0.8\~2.4\;mm)$, extraction time (2 hr) and solvent/solid ratio (20:1) were selected as optimal conditions for extraction.. Microwave and ultrasound treatment increased the extraction yields of total sugar, protein and phenolic compounds and the radical scavenging activity of extract. In comparison with microwave treatment and ultrasound treatment, microwave treatment was more effective than that of ultrasound treatment. The yields of all three compounds and the radical scavenging activity of extract were higher in pressured boiling extraction than in boiling underatmospheric pressure. The results showed that microwave radiation and sonication prior to extraction, and pressured extraction could be utilized for improving the extraction efficiency of G. lucidum.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.205-212
• /
• 1998

In this study, the effects of water vapor in inlet air on combustion efficiency, general performance, knock characteristics and emission gas concentration were investig- ated through the experiments of combustion and vibration analyses, emission gas analysis by changing water vapor quantity in inlet air with temperature and humidity auto control unit. With partial vapor pressure increase, the brake torque at wide open throttle status decreased and the average ignition delay angle increased, IMEP (indicated mean effective pressured using the integral and 3rd derivatives of filtered cylinder pressure as knock intensity, which matched well with the method of frequency power spectrum of block vibration signal. Water vapor in intake air had influence on the spark knock sensitivity. With the increase of water vapor content in intake air NOx emission was decreased and HC emission was increased.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.859-872
• /
• 1996

The purpose of this study was to evaluate the effect of low concentrative ${\beta}-APN$ on the periodontal ligament and relationship between lathyrintic bodies and osteoclast cells near the by alveolar bone. Mandibles including teeth and periodontiums of 24 Sprague-Dawley rat was used. ${\beta}-APN$ 0.2g/kg/day soluted in mineral water was administrated for 5 days before sacrifice in experimental group. 3 rats on each day was sacrificed on 1, 3, 7, 11 days after stop administration ${\beta}-APN$. Histologic examination and the activity of osteoclasts by tartrate resistant acid phosphatase was observed. The results were as follows : 1. In experimental group, the The small foci of lathyrintic bodies surrounded by palisading fibroblasts were seen obviously on 1, 3 days and decreased after 7 days. On 11 days, fibroblasts of periodontal ligament similar to control group. 2. The lathyrintic bodies were seen in the middle zone of periodontal ligament of pressured area like furcation area, alveolar crest, bone resorption area than tensioned area of apposition area. 3. In experimental group of 1, 3 days, lathyrintic bodies were much seen in the area that osteoclasts was much distributed area. After 7 days, experimental group was seen the control group. In conclusion, rathyrintic bodies were formed by low concentrative ${\beta}-APN$ chiefly on the pressured area like furcation area, alveolar crest, bone resorption area than tensioned area of apposition side in periodontal tissue and concerned with osteoclast cells.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1658-1663
• /
• 2004

The feasibility test was performed to check the possibility of 2-phase flow visualization and water distribution at inside the PEMFC using neutron radiography image technique. It was composed using water and pressured air. From the image, several 2-phase flow patterns were discovered and water fraction was estimated by the reference specimen and image analysis.

• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.85-91
• /
• 2015

This study was initiated to evaluate ethanol production by a Korean isolate of white rot fungus Irpex consors. It was found that the fungus could produce ethanol by converting glucose, mannose, xylose, and cellobiose under semi-aerobic condition with yields of 0.23, 0.19, 0.21, and 0.17 g ethanol per g sugars, respectively. Furthermore, the strain produced ethanol by simultaneous saccharification and fermentation of rice straw treated with steam pressured boiling water, 3% NaOH, and 3% $H_2SO_4$ with maximum yields of 0.12, 0.15, and 0.19 g ethanol per g rice straw, respectively. These results suggested that I. consors could produce ethanol from the components of cellulose and hemicellulose including glucose, mannose, xylose, cellobiose as well as rice straw treated with steam pressured boiling water, dilute sodium hydroxide, and dilute sulfuric acid. This is the first report that I. consors mycelia produce ethanol from various sugars and lignocellulosic substance including rice straw.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.341-348
• /
• 2011

As a result of the detailed site investigation performed for the design of a 4.3 km long tunnel, geological anomalies of four fault zones and a rock boundary were discovered on the tunnel route. Most of all, it was confirmed that pyrite, which may corrode steel material, is contained inside the geological anomalies, and pressured ground water flows out of the fault fractured zone. To overcome these geological conditions, antisulfur concrete for the concrete lining and anticorrosive swelling rock bolts are designed in the pyrite-containing sections. For the sections where a great amount of groundwater outflows, water blocking methods including grouting are applied according to the result of numerical analyses on the seepage. In addition, since the past earthquakes occurred around Korea have take place mainly near fault zones, seismic analyses were performed based on the Soil-Structure Interaction (SSI) concept and the strength of concrete tunnel lining is designed to be 27 MPa from 24 MPa in order to reinforce the tunnel structure.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.2
• /
• pp.159-165
• /
• 2004

Fuel cell makes electricity through chemical reaction. Bipolar-plate distribute hydrogen, oxidation using channel geometry condensation of water vapor inside channels of bipolar-plates lowers efficiency of fuel cell. Usually high pressured gas supply is used to solve the water condensation problem with serpentine type channel geometry. In this study, a new channel geometry shows feasible to minimize lowering efficiency due to water condensation through numerical and experimental analysis.