• Nuclear Engineering and Technology
• /
• v.15 no.4
• /
• pp.236-247
• /
• 1983

Analyzed are the the DNBR(Departure from Nucleate Boiling Ratio) sensitivities to variations in various PWR operating parameters utilizing the Korea Nuclear Unit 1(KNU-1) design and operating data. Studied parameters in the analysis are core power level, system pressure, core inlet flow rate, core inlet temperature, enthalpy rise hot channel factor, and axial power peaking factor and axial offset. The calculations are performed using the steady state and transient thermal-hydraulics computer program, COBRA-IV-K, which is the revised version of COBRA-IV-i that has been adapted, partially modified and verified at KAERI. A reference case is established based on the design and operating condition of the KNU-1 reactor core, and this provides a basis for the subsequent sensitivity analysis. From the calculation results it is concluded that the most sensitive parameter in the DNBR thermal design is the coolant core inlet temperature while the axial power peaking factor is the least sensitive.

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2013

The aim of this study is to assess thermal hazards of polystyrene polymerization process by bulk polymerization with accelerating rate calorimeter(ARC) and Multimax reactor system(MM). From this study, we found out that the polymerization process should be operated at reaction temperature of $120^{\circ}C{\sim}130^{\circ}C$. At reaction temperature over $130^{\circ}C$, there was a runaway reaction hazard due to the temperature control failure following a viscosity increase of reaction products. With a cooling failure of a reactor in the early stage of process operation at the reaction temperature ($120^{\circ}C{\sim}130^{\circ}C$), there was a high thermal hazard of burst of a reactor's rupture disk or explosion of a reactor caused by the rapid rise of temperature and pressure to $340^{\circ}C$, 5.3 bar respectively within 30 - 50 minutes.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.105-113
• /
• 2017

Recently the direct injection diesel engine is the most efficient one available for road vehicles, so this fundamental advantage suggests the compression injection diesel engine are a wise choice for future development efforts. The compression ignition diesel engine, with its bigger compression ratios if compared to the SI engine, offers a higher thermodynamic efficiency, also additionally the diesel engine with its less pumping losses due to the throttled intake charge as in a SI engine has higher fuel economy. But the largest obstacle to the success of this engine is meeting emission standards for Nitric oxides and particulate matter while maintain fuel consumption advantage over currently available engines. Thus its use should be largely promoted, however, diesel engine emits more Nitric oxides and particulate matter than other competing one. There has been a trade-off between PM and NOx, so efforts to reduce NOx have increased PM and vice versa, but trap change this situation and better possibility emerge for treating NOx emission with engine related means, such as injection timing, equivalence ratio, charge composition, and engine speed. The common rail direct injection system is able to adjust the fuel injection timing in a compression ignition engine, so this electronically controlled injection system can reduce the formation of NOx gas without increase in soot. In this study it is designed and used the engine test bed which is installed with turbocharge and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.33-39
• /
• 2019

The improvement of emissions, fuel economy, and combustion noise is a primary target in the development of heavy-duty diesel engines. Multiple injection has been introduced as one of the most promising strategies for this goal. In this research, various multiple injection methods were applied to achieve the optimal strategy in terms of emissions, fuel economy, and combustion noise. In the case of one pilot injection, the smoke emission deteriorated, while the NOx emission was reduced. In the case of 2 pilot injections, the NOx and smoke emissions were reduced by 73% and 84%, respectively. In this case, the combustion noise was analyzed with the maximum pressure-rise rate, and the fuel economy was evaluated with the help of the indicated specific fuel consumption. A 15%:15% 2-pilot injection strategy accomplished improvements of 32.9% for NOx, 60.4% for smoke, 1.95% for fuel consumption, and 19.4% for combustion noise compared to the case of single injection. Based on the data, an optimal injection strategy will be developed for a greater operating range in future work.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.11-15
• /
• 2018

Torque tubes in High Temperature Superconducting (HTS) motor transfer torque from superconducting field winding rotor to the room temperature shaft. It should have minimum heat conduction property for minimizing the load on cryo-refrigerator. Generally, these torque tubes are made with stainless steel material because of high strength, very low outgassing and low thermal contraction properties at cryogenic temperatures and vacuum conditions. With recent developments in composite materials, these torque tubes could be made of composites such as Kevlar and S-Glass, which have the required properties like high strength and low thermal conductivity at cryogenic temperatures, but with a reduced weight. Development and testing of torque tubes made of these composites for HTS motor are taken up at Bharat Heavy Electricals Limited (BHEL), Hyderabad in collaboration with Central Institute of Plastics and Engineering Technology (CIPET), Chennai and Indian Institute of Technology (IIT), Kharagpur. As these materials are subjected to vacuum, it is important to measure their outgassing rates under vacuum conditions before manufacturing prototype torque tubes. The present study focusses on the outgassing characteristics of Kevlar and S-Glass, using an Outgassing Measurement System (OMS), developed at IIT Kharagpur. The OMS facility works under vacuum environment, in which the test samples are exposed to vacuum conditions over a sufficient period of time. The outgassing measurements for the composite samples were obtained using pressure-rise technique. These studies are useful to quantify the outgassing rate of composite materials under vacuum conditions and to suggest them for manufacturing composite torque tubes used in HTS motors.

• Sleep Medicine and Psychophysiology
• /
• v.29 no.1
• /
• pp.4-8
• /
• 2022

Obesity hypoventilation syndrome (OHS) is defined as the triad of obesity (body mass index, [BMI] ≥ 30 kg/m²), daytime hypercapnia (PaCO2 ≥ 45 mm Hg), and sleep breathing disorder, after excluding other causes for hypoventilation. As the obese population increases worldwide, the prevalence of OHS is also on the rise. Patients with OHS have poor quality of life, high risk of frequent hospitalization and increased cardiopulmonary mortality. However, most patients with OHS remain undiagnosed and untreated. The diagnosis typically occurs during the 5th and 6th decades of life and frequently first diagnosed in emergency rooms as a result of acute-on-chronic hypercapnic respiratory failure. Due to the high mortality rate in patients with OHS who do not receive treatment or have developed respiratory failure, early recognition and effective treatment is essential for improving outcomes. Positive airway pressure (PAP) therapy including continuous PAP (CPAP) or noninvasive ventilation (NIV) is the primary management option for OHS. Changes in lifestyle, rehabilitation program, weight loss and bariatric surgery should be also considered.

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.38-50
• /
• 2006

Objectives: The aim of this study was to evaluate the effects of Korean ginseng (KG), Korean red ginseng (KRG) and fermented Korean red ginseng (FKRG) extracts on cerebral hemodynamics and to compare distinction of each extract. Methods: Ten healthy male volunteers $(26.0{\pm}1.8yrs)$ participated in the study according to double-blind and cross-over protocols. Each volunteer was blindly administered 500mg of KG, KRG, FKRG extract or placebo (Dextrin). Blinded researchers measured changes of hyperventilation-induced cerebrovascular reactivity (CVR), mean blood flow velocity (MBFV) of middle cerebral arteries (MCAs) and corrected blood flow velocity at $P_{ETCO2}=40mmHg$ (CV40) using transcranial Doppler ultrasound (DWL Co., Germany). Researchers also observed changes of mean blood pressure (MBP), pulse rate (PR) and expiratory $CO_2$ using S/5 Collector (Datex-Ohmeda Co., Finland). The evaluation was performed at basal condition, and repeated at 1, 2, 3, 4 and 5 hours after administration. Results: MBFV and CV40 in the KRG group tended to rise at I hour after administration, while those of the FKRG group tended to rise at 2 hours after administration. CVR increased significantly after 1 hour in the KRG group (p=0.009) and after 2 hours in the FKRG group (p=0.035), respectively. The KG group showed increasing tendency at 4 hours after administration. No group showed significant difference from the placebo in changes of MBP and PR. Conclusions: It is suggested that KG, KRG and FKRG extracts have effects of enhancing CVR and thus of increasing cerebral blood flow in human subjects.

• Journal of Sasang Constitutional Medicine
• /
• v.23 no.3
• /
• pp.391-401
• /
• 2011

1. Objectives: Though the eating habits have improved and the living method has become convenient according to the economic growth thanks to the modern industrialization, because of the lack of exercise, obesity, wrong eating habits and stress etc, various symptoms of disease of adults are on the rise. This is the phenomenon that happens as the eating life has become life in the West along with the inundation of the western culture in our society. In this perspective, there has been many various clinical research that's been proceeded so far about the physical constitution and obesity, but there has been little research on the objective analysis of the clinical research about the alimentotherapy using taeeumjoweetang. 2. Methods: In this research we have checked the weights, fat rates, fat weight, abdominal fat rate, blood pressure, and BMI over the objects of the women that were diagnosed as lunisolar system as their physical constitution, and assessed the paramecium lipid, in-blood antioxidation enzyme and the damage of oxidization in the urine by physical constitution-specific of the body shapes that were determined by BMI. The statistical analysis of the current research was processed by using of SPSS 17.0 program. We have figure out statistical amounts such as the arithmetic average, average deviation rate and percentage number. Fro the verification of he significancy of each elements, we have used the paired t-test, ANOVA, Chi-square test at the level of p<0.05. 3. Results and Conclusions: Their characteristics are age $21.20{\pm}1.35$, height $160.30{\pm}6.11cm$, weight $64.66{\pm}8.72kg$, fat rates are $35.97{\pm}4.87%$, fat amount $23.40{\pm}5.48$, abdominal fat rate $0.823{\pm}0.03$, BMI $25.12{\pm}2.79kg/m^2$, and systolic blood pressure $111.60{\pm}10.28mmHg$ and diastolic blood pressure $68.60{\pm}7.43mmHg$ and we have let them take the medicine twice a day for 8 weeks. The clinical result for the Cholesterol, Triglyceride, HDL-cholesterol, LDL-cholesterol, SGOT, SGPT, of the object people was that for the function of the liver, the result of the SGOT and SGPT test was $17.16{\pm}3.05$, $15.00{\pm}2.99IU/L$, which was a decrease, and had statistical meaning, but for the SGOT, though the figure reduced to $11.92{\pm}4.61$, $10.80{\pm}3.07$, it had no statistical meaning. For the whole cholesterol level, the figure reduced to $169.00{\pm}19.95$, $160.08{\pm}22.52$ mg/dL and had statistical significance(p<0.05). Neuter fat number, Triglyceride has slightly increased to $67.52{\pm}36.32$, $68.08{\pm}47.33$ mg/dL but did not have any statistical meaning. The antioxdant enzyme marker standard marker, SOD has increased to $2.52{\pm}0.73$, $2.86{\pm}0.60U/ml$, and had statistical significance(p<0.01). Catalase also increased by $0.63{\pm}0.18$, $1.07{\pm}0.25mmol/ml$ and had statistical meaning(p<0.01). GPx also increased to $204.76{\pm}32.64$ nmol/ml and had statistical meaning(p<0.01). But, for the Total antioxidant, though it has raised to $1.51{\pm}0.26$, $1.57{\pm}0.17nmol/{\mu}l$, it did not have any statistical meaning. MDA of oxidative stress marker has decreased to $1.70{\pm}0.68{\mu}g/ml$, $1.21{\pm}0.50{\mu}g/m$ and had statistical significance(p<0.01). 8-OHdG also decreased $3.35{\pm}0.95ng/ml$, $2.21{\pm}0.50ng/ml$ and had statistical meaning(p<0.01). In this research, we have analyzed the various markers relating to BFM and changes in oxidative enzyme in blood by takingtaeeumjoweetang. Taeeumjoweetang has the positive effect on inbody antioxidant system and reducing the content of cholesterol, which is proven to help losing weight and improving hyperlipidemia statistically. With this research, we hope to improve the lifestyle of those who are either obese or need to manage their dietary habits, and also to become the touchstone of integrating Oriental Medicine with the science of food & nutrition.

• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.181-185
• /
• 2001

Background: Bradycardia frequently occurs in intravenous anesthesia with propofol. Additionally, the thoracic sympathetic nerves influence the heart so that the heart rate (HR) and blood pressure are expected to decrease due to this procedure. Therefore, we measured changes in HR, mean arterial pressure (MAP) and both thumb temperatures before and after thoracic sympathicotomy under total intravenous anesthesia with propofol. Methods: The subjects included 21 outpatients of ASA class I who received thoracoscopic thoracic sympathicotomy under total intravenous anesthesia. Anesthesia was induced with propofol (2 mg/kg) and vecuronium (0.1 mg/kg) and maintained with propofol-fentanyl-oxygen (100%). The surgical procedure was performed at the T3 level in the order of left sympathicotomy (LST) and right sympathicotomy (RST). Measurements of HR, MAP and both thumb temperatures were taken before induction of anesthesia, before and after LST and RST, and 1 hour after the completion of anesthesia. Additionally, the time to the beginning of a rise in temperature in both thumbs after sympathicotomy was recorded. Results: HR did not show any significant difference before or after sympathicotomy, however it decreased at 1 hour after the completion of anesthesia. MAP decreased after LST and decreased further after RST. Left thumb temperature began to increase at $45.8{\pm}10.7$ seconds after LST. Right thumb temperature initially decreased after LST and increased from $45.2{\pm}11.8$ seconds after RST. Subsequently, both increased temperatures were maintained at 1 hour after the completion of anesthesia. Conclusions: Although HR and MAP decreased, there were no severe hemodynamic changes. An increase in the thumb temperature was confirmed within 1 minute after sympathicotomy on the same side.

• Journal of Chest Surgery
• /
• v.12 no.3
• /
• pp.281-288
• /
• 1979

For years, physicians and anatomists have been interested in the heart that has one functioning ventricle. Various terms have been suggested for this entity including single ventricle, common ventricle, double-inlet left ventricle, cor biatriatum triloculare, and primitive ventricle. In this report, the term "single ventricle" is utilized as suggested by Van Praagh, and is defined as that congenital cardiac anomaly in which a common or separate atrioventricular valves open into a ventricular chamber from which both great arterial trunks emerge. An outlet chamber, or infundibulum, may or may not be present and give rise to the origin of either of the great arteries. This definition excludes the entity of mitral and tricuspid atresia. An 11 year old cyanotic boy was admitted chief complaints of exertional dyspnea and frequent upper respiratory infection since 2 weeks after birth. He was diagnosed as inoperable cyanotic congenital heart disease, and remained without any corrective treatment up to his age of 11 year when he suffered from aggravation of symptoms and signs of congestive heart failure for 2 months before this admission. On 22nd of May 1979, he was admitted for total corrective operation under the impression of tricuspid atresia suggested by a pediatrician. Physical check revealed deep cyanosis with finger and toe clubbing, and grade V systolic ejection murmur with single second heart sound was audible at the left 3rd intercostal space. Development was moderate in height [135 cm] and weight[28Kg]. Routine lab findings were normal except increased hemoglobin [21.1gm%], hematocrit [64 %], and left axis deviation with left ventricular hypertrophy on EKG. Cardiac catheterization and angiography revealed 1-transposition of aorta, pulmonic valvular stenosis, double inlet of a single ventricle with d-loop, and normal atriovisceral relationship [Type III C solitus according to the classification of Van Praagh]. At operation, longitudinal incision at the outflow tract of right ventricle in between the right coronary artery and its branch [LAD from RCA] revealed high far anterior aortic valve which had fibrous continuity with mitral annulus, and pulmonic valve was stenotic up to 4 mm in diameter positioned posterolaterally to the aorta. Ventricular septum was totally defective, and one markedly hypertrophied moderator band originated from crista supraventricularis was connected down to the imaginary septum of the ventricular cavity as a pseudoseptum of the ventricle. Size of the defect was 3X3 cm2 in total. Patch closure of the defect with a Teflon felt of 3.5 x 4 cm2 was done with interrupted multiple sutures after cut off of the moderator band, which was resutured to the artificial septum after reconstruction of the ventricular septum. Pulmonic valvotomy was done from 4 mm to 11 mm in diameter thru another pulmonary arteriotomy incision, and right ventriculotomy wound was closed reconstructing the right ventricular outflow tract with pericardial autograft of 3 x 4 cm2. Atrial septal defect of 2 cm in diameter was closed with 3-0 Erdeck suture, and atrial wall was sutured also when rectal temperature reached from 24`C to 35.5`C. Complete A-V block was managed with temporary external pacemaker with a pacing rate of 110/min. thru myocardial wire, and arterial blood pressure of 80/50 mmHg was maintained with Isuprel or Dopamine dripping under the CVP of 25-cm saline. Consciousness was recovered one hour after the operation when his blood pressure reached 100 /70 mmHg, but vital signs were not stable, and bleeding from the pericardial drainage and complete anuria were persisted until his heart could not capture the pacemaker impulse, and patient died of low output syndrome 320 min after the operation.