• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.559-566
• /
• 2011

본 연구에서는 적외선 윈도우의 냉각을 위해 포펫 밸브와 방사형 오리피스로 구성된 냉각장치 유로를 설계하였다. 필요한 냉각제의 양은 운용조건에 따라 달라지므로 포펫 행정거리에 따른 유동장의 유량과 윈도우 전후단 압력 변화를 유동해석을 통해 예측하고 실험을 통해 이를 확인하였다. 설계된 포펫과 방사형 오리피스 유로는 윈도우 냉각에 필요한 유량을 공급하며 윈도우 구조 강도를 만족하도록 내부 압력을 낮추고 적외선 이미지 신호의 왜곡이 없도록 아음속으로 유지하여 요구 조건을 충족시켰다. 실험으로 측정된 유량을 이용하여 윈도우에서의 송출계수와 2차원 해석결과 사이의 보정계수를 확인하였으며 이를 냉각장치의 유량제어에 사용하였다.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.41-46
• /
• 2002

Effect of secondary air injection (SAI) on hydrocarbon reduction has been investigated in a single cylinder Sl engine operating at cold-steady/cold-start conditions. The hydrocarbon emission and exhaust gas temperature with and without catalytic converter were compared with continuous and synchronized SAIs, which injected secondary air intermittently into exhaust port. Effects of SAI location, SAI pressure, SAI timing, and location of catalytic converter have been investigated and the results are compared for both SAls with base condition. At cold-steady condition, the rate of HC reduction increased as the location of SAI was closer to the exhaust valve for both synchronized and continuous SAls. The emission of HC decreased with increasing exhaust-A/F when it was rich, and was relatively insensitive when it was lean. The timing of SAI in synchronized SAI had significant effect on HC reduction and exhaust gas temperature and the synchronized SAI was found to be more effective in HC reduction and exhaust gas temperature compared to the continuous SAI . At cold-start condition, when the catalytic converter was located 20 cm downstream from the exhaust port exit, the catalytic converter warm-up period for both SAls decreased by about 50%, and the accumulated hydrocarbon emission during the first 120 s decreased about by 56% and 22% with the synchronized and continuous SAIs, respectively, compared to that of the base condition.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.59-66
• /
• 2008

Recently, automobile parts progress with modularization, which a great many allied products are modularized. Therefore, the purpose of this study is to develope modular housing for modularization of steering gear. Generally, steering gear housing is composed of valve housing and rack housing, it is important to combine two housings. However, housing having the pipe shape is very sensitive to welding distortion, and welding trajectory is very complicated. In order to solve this subject, cooperative control by using robots was constructed. Further, we developed the dedicated system to suit modular housing based on it, and applied laser welding to there. Moreover, welding speed was controlled in the rapid curve section so that the defect in trajectory of housing was reduced to obtain sound weldment. Accordingly, produced housing by this way is presented enough withstanding pressure to $100kg/cm^2$, and roundness and straightness are measured about 10/100 and 0.9/100 respectively.

• Journal of Chest Surgery
• /
• 제26권1호
• /
• pp.36-43
• /
• 1993

Sixty four children [aged 2 days to 9 years] , 58 with complete transposition of the great arteries, 5 with Taussig-Bing double outlet right ventricle, and 1 with double outlet left ventricle plus left ventricular type single ventricle, have undergone anatomic correction from November 1987 to August 1992. Eleven underwent previous operations: pulmonary artery banding[7], modified Blalock-Taussig shunt[2], coarctoplasty[2], aortic arch reconstruction[1] . Of 58 patients with TGA, Type A coronary arteries of Yacoub were seen in 50[86%]. U-shaped coroanry arterial flaps were transfered to the neoaorta using trap door technique, and neopulmonary arterial tract was constructed using glutaraldehyde fixed autopericardium with Lecompte maneuver. There were 18 hospital deaths [28.1%] with no late mortality. Mean follow-up of 20.4\ulcorner11.9 months were achieved in all survivors. Postoperative cardiac catheterizations were done in 14 cases. Mean pressure gradients of pulmonary and aortic outflow tract were 15.0 $\pm$2.6 and 4.2$\pm$1.4mmHg, mild aortic valve insufficiencies were found in 2, and mean cardiac index was 5.18$\pm$0.19 L/min/M2. We conclude that we should continue anatomic correction for the complex congenital heart anomalies with the malposition of the great arteries because myocardial function seems to be well preserved, though we are still on the learning curve.

• 한국자동차공학회논문집
• /
• 제2권4호
• /
• pp.27-38
• /
• 1994

In this paper, a simplified model of a hydraulic actuator system for a low-band type active suspension system is derived. To reduce the order of model, time constants of each chamber in hydraulic system are neglected except that of an accumulator. And the dynamics of a spool in the pressure control valve is regarded as a first-order system. The step response and the frequency response of the simplified second-order simulation model exhibit a good agreement with those of the actual system as well as those of the tenth-order simulation model. It is possible to simplify the tenth-order model to the second-order one. The low-band type active suspension model is built up by combining of a quarter car model test rig to testify the validity of the simplified model. The experimental results of suspension characteristics show that the simplified second-order hydraulic actuator model is reasonable to describe the dynamics of the actual hydraulic actuator system for a low-band type active suspension system.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.28-36
• /
• 2000

Spray characteristics of diesel fuel injection is one of the most important factors in diesel combustion and pollutant emissions especially in HSDI (High Speed Direct Injection) diesel engines where the interval between the onset of combustion and the evaporation of atomized fuel is relatively short, An investigation into various spray characteristics from different holes of VCO(Valve Covered Orifice) nozzles was performed and its results were compared to standard sac nozzle. The global characteristics of spray, including spray angle, spray tip penetration, and spray pattern were measured from the spray images which were frozen by an instantaneous photography with a spark light source. For better understanding of spray behavior, SMD of the fuel sprays from multi hole nozzles were measured with back light imaging while the sprays from the other holes are covered by a purpose-built nozzle cap. The investigation manifestly reveals the different spray patterns at the beginning of injection produced by VCO nozzles can be identified as three distinct types with their own macroscopic and microscopic characteristics, while macroscopic non-uniformity disappears at 0.9∼1.0ms from the start of injection.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.22-29
• /
• 2003

KSR-III 추진기관 공급계는 각종 배관류, 밸브류 및 이를 제어하는 제어기로 구성되어 있으며, 엔진으로 유입되는 추진제의 제어를 담당하고 있다. 이러한 공급계 시스템의 특성을 검증하고, 구성부품의 성능을 확인하기 위하여 PTA-I 수류시험을 실시하였다. PTA-I 시험설비는 엔진과 헬륨가압탱크를 제외한 공급계 전체와 지원설비로 이루어져 있다. PTA-I에서는 밸브, 제어기와 같은 단품에 대한 시스템 시험, 배관특성시험, 추진제 유량조절 시험, 배관부 압력 변동폭 및 주파수 특성 시험, 레귤레이터 성능 시험등을 수행하였다. PTA-I 시험을 통하여 구성단품에 대한 문제점을 발견하고 이를 수정보완 하였으며, 공급계 시스템의 설계 데이터와 시험데이터 비교를 통한 설계 검증을 완료하였다. PTA-I 시험의 결과는 PTA-II 및 연소시험을 수행하기 위한 시스템 구성에 적용하였다.

• 항공우주시스템공학회지
• /
• 제8권2호
• /
• pp.7-13
• /
• 2014

In order to enable fail-safe operation the electro-hydrostatic actuators can be dualized. When a symmetrical actuator is combined in series with an asymmetrical actuator with single rod cylinder, the flow rates of their cylinders are unmatched. If their position controller has same configuration, one of their pumps can supply too much flow rate under particular load conditions, which should be bypassed into low pressure side e.g. by a relief valve. In this paper it is shown how the hydraulic circuit for the asymmetrically combined electro-hydrostatic actuator can be designed without sacrificing power consumption.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.43-48
• /
• 2018

The hydraulic control valve, used in the CPB (cold-pad-Batch) cold dyeing system, passes through a pressurized material that absorbs the dye. The hydraulic control of the hydraulic control panel shall be driven in a uniform and precisely controlled manner, as it interferes directly with the dyschromatism. In this study, an acceleration test model was employed to verify the durability of the hydraulic control of the hydraulic control panel, which was manufactured by the scenic model, and the pre-roll angle was analyzed before the performance of acceleration test. Based on the change in the amount of deformation of the padder roll the durability of the padder roll was analyzed along with verification of the durability of the skin and the rubber coating in contact with the fabric. Furthermore, the accelerated test method used for hydraulic controlled multi-cell padder rolls was verified.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.