• 한국음향학회지
• /
• 제19권4호
• /
• pp.69-76
• /
• 2000

본 연구에서는 Class IV Flextensional 트랜스듀서의 여러 설계변수들에 따른 음압 변화 및 열 발생 경향성을 유한요소 해석법으로 해석하였다. 해석되어진 결과를 바탕으로 최대 음압을 구현하고, 열 발생이 최소인 중심 주파수 1 kHz를 가지는 Class IV extensional 트랜스듀서의 최적구조를 설정하였다. 본 연구에서 설정한 최적구조는 기본모델에 비해 음압이 2배 이상 크고 열 발생은 아주 작은 것으로 나타났다. 본 연구의 결과는 향후 다양한 중심 주파수 및 최대 음압을 구현하고 열 발생이 최소인 Class IV Flextensional 트랜스듀서를 설계함에 있어 유용한 자료로 활용될 수 있을 것이다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.1-10
• /
• 2010

The present study is a fundamental approach to develop the measuring technology for minute fluctuating pressures on the three-dimensional blade surfaces of the fan which rotates with an arbitrary rotation-axis direction. In this situation, we are required to correct the centrifugal-force effect, the gravitational-force effect and the other leading-error effects for accurate measurements of the minute pressures. The working fluid is air. A pressure transducer rotating with an arbitrary attitude is closely sealed by a twofold shroud system. The rotational motion with an arbitrary attitude is produced by fixing the pressure transducer to the cantilever which is connected to a motor-driven disc of 500mm in diameter and 5mm in thickness. As a result, we have quantitatively determined main governing effects upon the non-effective component of the pressure-transducer signal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1564-1567
• /
• 1998

This paper presents a smart thin film pressure transducer which is highly suitable for a precise and remote measurement of pressure and has the following smart functions: automatic zero tracking, automatic span adjustment, temperature compensation, continuous self-diagnostics for faults(open strain gages, abnormal data, incorrect A/D conversion, and overpressure), data memory and multi-drop communication with PC.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.46-52
• /
• 2019

This work proposes a noncontact ultrasonic transducer for detecting wall-thinning of containment liner plates of nuclear power plants by measuring their thickness without physical contact. Because the containment liner plate is designed to prevent atmospheric leakage of radioactive substances under severe nuclear accident, its wall-thinning inspection is important for safety of nuclear power plants. Wall-thinning investigation of containment liner plates have been carried out by measuring their thickness with contact-type ultrasonic thickness gauge by inspectors and needs a lot of time and cost. As an alternative, an electromagnetic acoustic transducer measuring precisely thickness of containment liner plates without any physical contact or couplant was suggested in this research. A transducer generating and measuring shear ultrasonic waves in thickness direction was designed and wave field produced by the transducer was analyzed to verify the design. The working performance of the suggested transducer was tested with carbon steel plate specimens with various thicknesses. The test result shows that the proposed transducer can measure thickness of the specimens precisely without any couplant and implies that swift scanning of wall-thinning of containment liner plates will be possible with the proposed transducer.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.123-130
• /
• 2001

The research described in this paper was aimed toward improving the understanding of the interaction of tire inflation pressure and the soil-tire interface stresses. A three-directional stress transducer was developed to measure stress distribution on undertread for a tractor tire. The transducer can directly measure three-directional stresses (normal stress, tangental stress and lateral stress and lateral stress) simultaneously and has both strong structure and high sensitivity, which is not changed by the abrasion of the detecting plate. Measurements of soil-undertread interface stresses were made at tire center on undertread on a 12.4-R24 radial tractor tire opeated at three combinations of a dynamic load (11.8kN) and three inflation pressures (59kPa, 108kPa and 157kPa). These measurements showed that as inflation pressure increased, the soil-undertread interface stresses increased. The results of three stresses comparisons were shown that the peak normal stresses were considerably higher than the tangential peak stresses and the peak lateral stresses.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.1-6
• /
• 2012

본 연구에서는 광대역(100 kHz - 1 MHz) 탐촉자를 사용하여 자동차용 CNG연료탱크의 파열시험시 발생하는 음향방출신호의 분석을 통해 압력용기의 손상정도를 평가하였다. 압력이 420 bar까지 올라가기 전의 각 단계에서는 Kaiser 효과가 나타나고 creep 효과가 거의 나타나지 않으나, 420 bar 이상 상승시 creep 효과가 현저히 나타남으로써 용기가 손상을 입었다는 것을 알 수 있었으며, 480 bar 압력 상승 단계에서는 Kaiser 효과가 없어졌다. 540 bar의 압력 단계에서 공진형 탐촉자의 경우에서는 480 bar의 압력단계에 비하여 energy나 count 같은 activity가 감소하였으나 광대역 탐촉자의 경우 계속적으로 증가하였다. 또한 rise time이나 주파수 분석을 통해서 복합재료 압력용기의 손상 메카니즘을 관찰하기 위해서는 일반적으로 금속압력용기에서 많이 사용되는 공진형 탐촉자(150 kHz)보다 광대역 탐촉자가 효과적임을 알 수 있었다.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.833-839
• /
• 2013

Cardiopulmonary resuscitation (CPR) is performed by thoracic compression and artificial ventilation for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are facing the whole area perpendicular to the flow axis. The present study developed a new air flow transducer conveniently applicable to CPR. Specially designed "sensing rod" samples the air velocity at 3 different locations of the flow cross-section, then transforms into average dynamic pressure by the Bernoulli's law. The symmetric structure of the sensing holes of the sensing rod enables bi-directional measurement simply by taking the difference in pressure by a commercial differential pressure transducer. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1%. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• 센서학회지
• /
• 제18권5호
• /
• pp.377-384
• /
• 2009

The ultrasonic hyperthermia for oncology has been developed and studied. The HIFU(high intensity focused ultrasound) is the most recent method to treat the tumor by using ultrasound. In this study, an insertion-type transducer for treating a prostate cancer, which can focus the ultrasonic beam mechanically and electrically, was designed and developed. The developed transducer was composed of three arrays, and each array has 32 elements. For the purpose of the mechanical focusing, both side arrays are slanted to the center array by $15^{\circ}$. With this structure, NFL(near field length) was set up as 30 mm. The PZT-4 and two matching layers were used, and the backing layer was excepted to prevent energy losses. The acoustic field analysis and the heating test were performed to evaluate the performance of developed transducer. The shape of an acoustic field, peak pressure, and acoustic pressure distribution were compared with numerical simulation. The NFL was 32 mm, the beam width was 5 mm, focal area was $40\;mm^2$, and peak pressure was 5.5 MPa. With heating by using developed transducer, the temperature increased up to $33^{\circ}C$ at focal zone. As a result of this study, the usefulness of suggested transducer for prostate cancer hyperthermia was confirmed by the acoustic field analysis and the heating test with TMM(tissue mimicking) phantom.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.137-146
• /
• 2019

다수의 초음파 트랜스듀서를 이용한 초음파 위상 배열은 초점제어에 의해 인체 내 종양을 치료하는 목적 등으로 사용되고 있다. 초점제어에 의해 결정된 각 초음파 트랜스듀서 표면음압의 크기와 위상은 각 초음파 트랜스듀서에 인가되는 전압의 크기와 위상을 제어하여 구현 가능하다. 본 논문에서는 초음파 트랜스듀서의 인가전압과 표면음압 사이의 관계를 모델링하고, 요구되는 초음파 트랜스듀서의 표면음압을 생성하기 위한 인가전압을 PWM 기법으로 제어하는 방법을 제안한다. 제안한 방법의 타당성은 61개의 초음파 트랜스듀서로 구성된 초음파 위상배열의 초점제어를 예로 들어 시뮬레이션으로 검증하였다.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.270-277
• /
• 2021

강력초음파 분야에 있어서, 트랜스듀서의 고정을 위한 프렌지의 위치설정은 트랜스듀서의 변환효율에 큰 영향을 주는 중요한 요소이다. 본 연구에서는 볼트 체결형 란주반 초음파 트랜스듀서의 공진모드에 따른 프렌지의 설치 위치를 결정하기 위한 실험적 방법을 제안하였다. 제안된 방법에서는 반원형 쐐기 형태의 지그를 제작하여 트랜스듀서의 측면을 따라 이동하며 지그에 일정한 압력을 가한 후 트랜스듀서의 진동특성을 분석하였다. 압력을 가하는 위치에 따른 트랜스듀서의 입력 어드미턴스의 변화를 분석하여 프렌지의 최적의 위치를 결정할 수 있었다. 이 위치들은 메이슨 등가회로를 적용하여 계산한 공진 주파수 및 전송선로 모델 해석으로부터 계산한 각 공진 모드에 대한 입자속도 분포로부터 예측한 진동 모드의 절의 위치와 좋은 대응을 보이고 있어 본 연구에서 제안된 방법의 유효성을 확인할 수 있었다.