• 제목/요약/키워드: Pressure sensors

검색결과 954건 처리시간 0.022초

전기저항식 워터마크센서기반 소형 관수장치의 토양 수분퍼텐셜 자동제어 효용성 평가 (Feasibility Test on Automatic Control of Soil Water Potential Using a Portable Irrigation Controller with an Electrical Resistance-based Watermark Sensor)

  • 김학진;노미영;이동훈;전상호;허승오;최진용;정선옥;이중용
    • 생물환경조절학회지
    • /
    • 제20권2호
    • /
    • pp.93-100
    • /
    • 2011
  • 본 연구에서는 국내의 시설 내 작물재배에 적합한 자동관수 기술을 개발하기 위한 첫 단계로 전기저항의 변화원리를 이용하는 워터마크 센서를 장착한 소형 컨트롤러를 작물재배에 활용하여 자동관수기술의 효용성을 구명하고자 하였다. 이를 위해 비닐하우스 내에 다른 토성을 갖는 토양을 격리베드에 인공적으로 조성한 후 토마토를 정식하여 수분퍼텐셜을 -20kPa 수준으로 자동으로 조절하면서 재배하였다. 점적관수에 따른 토양 내 깊이별 수분변화는 Sentek 축전형 수분센서를 이용하여 측정하였다. 워터마크센서를 이용한 수분퍼텐셜 제어성능은 (-)20kPa 수준부근에서 유지되지 않고 반복적으로 0~(-)20kPa 대역에서 높은 변화 값을 나타내어 안정적이지 못한 것으로 나타났다. 특히, 물 공급은 관수시마다 약 50~60분 비교적 긴 시간동안 진행되어 수분공급이 과잉되는 문제가 나타났으며 건조시에도 수분퍼텐셜의 변화가 계단응답 반응의 형태로 변하는 불량한 측정해상도를 나타내었다. 이러한 문제는 워터마크센서의 토양과 전극 접촉형태가 다공컵식 수분장력계에 비해 수분값에 연속적으로 반응할 수 없는 구조이기 때문인 것으로 판단하였다. 자동관수에 따른 토양종류별 수분변화는 그 기울기가 토성별로 서로 달랐으며 양질사토의 경우 수분함량의 변화정도가 가장 높았다. 수분함량의 변화속도는 낮과 밤의 경우 시간에 따른 변화율이 달라서 변곡선의 형태를 나타내었다. 이러한 이유는 낮과 밤의 일교차와 태양광 유무에 의하여 수분증발량 차이가 발생하였기 때문인 것으로 판단하였다. 직물에서 20cm 떨어진 지점의 깊이별 수분함량은 작물에 인접한 위치와 비교하였을 때 세가지 토양 모두 관수에 의한 변화정도는 미미하여 직물에 인접한 곳만 수분공급이 효율적으로 이루어지는 것을 확인하였다. 추후 연구에서 양질사토 베드에서 관찰된 토마토 생육 불량 문제 개선과 관수멈춤 시간을 적용하여 물공급의 과잉 문제를 해결하는 보완실험이 요구되었다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

컬러센서를 위한 $TiO_{2}$/Se : Te 이종접합의 스펙트럼 응답 (Spectral Response of $TiO_{2}$/Se : Te Heterojunction for Color Sensor)

  • 우정옥;박욱동;김기완;이우일
    • 센서학회지
    • /
    • 제2권1호
    • /
    • pp.101-108
    • /
    • 1993
  • 컬러센서를 위한 $TiO_{2}$/Se : Te 이종접합을 고주파 반응성 스퍼터링법과 진공증착법을 이용하여 제작하였다. 제조된 $TiO_{2}$ 막형성의 최적조건은 $1000{\AA}$$TiO_{2}$ 두께에서 고주파전력 120 W, 기판온도 $100^{\circ}C$, 산소농도 50% 및 분위기압 50 mTorr였다. 이 때 광투과율은 파장 550 nm에서 85%, 저항률은 $2{\times}10^9{\Omega}{\cdot}cm$, 굴절률은 2.3이었다. 제조된 $TiO_{2}$막은 직접천이형 에너지 밴드구조를 가지며 광학적 밴드갭은 3.58 eV였다. 제조된$TiO_{2}$막을 $400^{\circ}C$에서 30분간 열처리함으로써 광투과율이 파장 $300{\sim}580$ nm범위에서 $0{\sim}25%$까지 개선되었다. 또한 화학양론적 조성비를 조사하기 위하여 AES 분석을 한 결과 Ti 및 0의 조성비는 1 : 1.7로 나타났다. 한편 Se : Te 막형성의 최적조건은 $190^{\circ}C$에서 1분간 열처리했을 때였다. 이러한 조건으로 제조된 Se : Te막의 광학적 밴드갭은 1.7 eV였으며 육방정계구조의 (100) 방향 및 (110) 방향으로 Se : Te 막이 결정화됨을 알 수 있었다. 1000 lux의 조도에서 Se : Te막의 광전변환률은 0.75였다. 또한 Se에 Te를 첨가함으로써 장파장영역의 분광감도가 향상되었다. $TiO_{2}$/Se : Te 이종접합의 분광감도는 가시광 전영역에서 비교적 넓은 분광감도를 나타내었으며, 특히 청색영역에서 a-Si박막보다 우수한 분광감도를 나타내었다.

  • PDF

치의학 교육을 위한 프로토타입 시뮬레이터의 개발 (Development of a prototype simulator for dental education)

  • 김미엘;심재훈;에인 몬;김명주;박영석;권호범;박재흥
    • 대한치과보철학회지
    • /
    • 제61권4호
    • /
    • pp.257-267
    • /
    • 2023
  • 목적. 이 연구의 목적은 치의학 교육을 위한 프로토타입 로봇 시뮬레이터를 제작하고, 하악운동을 시뮬레이션 할 수 있는지 여부를 테스트하며, 치과실습 중 자극에 대한 시뮬레이터의 반응 가능성을 평가하는 것이었다. 재료 및 방법. 가상 시뮬레이터 모델은 cone-beam computed tomography (CBCT) 데이터를 사용하여 경조직을 구획화한 후 제작되었다. 시뮬레이터의 프레임은 polylactic acid (PLA) 소재를 사용하여 3D 프린팅 되었으며, 덴티폼과 실리콘 얼굴 스킨을 장착하여 모델을 형성하였다. 서보 액추에이터는 시뮬레이터의 움직임을 제어하는데 사용되었고, 다양한 센서들로 시뮬레이터의 반응을 생성하였다. 수위 센서가 반응하는 물의 양을 측정하기 위해 수위테스트가 수행되었다. 또한, 컴퓨터 시뮬레이션과 실제 모델을 통해 시뮬레이터의 하악운동과 하악운동 범위를 테스트하였다. 결과. 프로토타입 로봇 시뮬레이터는 작동 장치, 전기 장치가 있는 상반신, 턱관절을 포함하는 머리 및 덴티폼으로 구성되었다. 시뮬레이터의 턱관절은 회전 및 병진 운동을 구현하면서 2자유도를 구동할 수 있었다. 수위 테스트에서 수위 센서의 특정 임계값은 10.35 ml였다. 컴퓨터 시뮬레이션과 실제 모델 모두에서 인간의 움직임을 모방하였고, 시뮬레이터의 하악운동 시 개구범위는 50 mm였다. 결론. 효율성과 안정성을 개선하기 위해서는 더 많은 발전이 필요하지만, 본 상반신 프로토타입의 시뮬레이터는 향후 치과실습 교육에 잠재적으로 유용할 것으로 기대된다.