• Geomechanics and Engineering
• /
• v.5 no.6
• /
• pp.595-611
• /
• 2013

This paper presents a three-dimensional (3D) integrated numerical model where the wave-induced pore pressures in a porous seabed around breakwater heads were investigated. Unlike previous research, the Navier-Stokes equation is solved with internal wave generation for the flow model, while Biot's dynamic seabed behaviour is considered in the seabed model. With the present model, a parametric study was conducted to examine the effects of wave and soil characteristics and breakwater configuration on the wave-induced pore pressure around breakwater heads. Based on numerical examples, it was found that the wave-induced pore pressures at breakwater heads are greater than that beneath a breakwater. The wave-induced seabed response around breakwater heads become more important with: (i) a longer wave period; (ii) a seabed with higher permeability and degree of saturation; and (iii) larger angle between the incident waves and breakwater. Furthermore, the relative difference of wave-induced pore pressure between fully-dynamic and quasi-static solutions are larger at breakwater heads than that beneath a breakwater.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.105-119
• /
• 2004

To enhance our understanding of the loads on the foot during treadmill running, we have used a pressure-sensitive insole system to determine pressure, rate of loading and impulse distributions on the plantar surface during treadmill running, both in minimally cushioned footwear and in cushioned shoes. This report includes pressure, rate of loading, impulse and contact time data from a study of ten subjects running on a treadmill at 4.0m/s. Among heel-toe runners, the highest peak pressures and highest rates of loading were observed under the centre of the heel and in the medial forefoot. The arch regions were only lightly loaded. Contact time was greater in the forefoot than in the heel. Two-thirds of the impulse recorded during the step was the result of forces applied through the forefoot, mostly in the region of the metatarsal heads. The distribution of loads in the shoe suggests that the load distributing properties of the cushioning system are most important in the centre of the heel, under the metatarsal heads and great toe. Shock attenuation is primarily required under the centre of the heel and to lesser extent under the metatarsal heads. Some energy dissipation may be desirable in the heel region because it causes shock to be absorbed with less force. All the 'propulsive' effort is applied through the forefoot. Therefore, this region should as resilient as possible.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.585-589
• /
• 2008

This study is performed to analyze the fluid flow about 150mm shower heads of semiconductor device. Under the air pressure, the ideal gas of moving fluid is injected as 5m/s velocity into inlet of shower heads and the flow distribution in shower heads is measured according to pitch of plasma distribution device. As results, the maximum and minimum value of fluid velocity are investigated with their position. The velocity values at outlet are also studied. From two experiment using the plasma distribution device, the results of CFD are compared with the experimental results. That results shows stable flow of fluid in that case of corrected design from CFD.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.349-352
• /
• 2008

In this study, a design method of developed shape for double-curved pressure vessel segment heads was proposed in consideration of in-plane strain induced by forming works. In order to obtain the developed shape of double-curved plate, at first, the segments are subdivided into elements and then they are stacked into a series of strips producing the outline of the approximately developed shape. The developed shape was determined by imposing the in-plane displacement obtained from forming analysis and regression analysis on the outline of the approximately developed shape. The validation of the proposed design method was verified by applying it to the actual products.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.118-125
• /
• 2007

In this study, we analyzed the plantar shear stress and normal pressure in lateral heel diabetic foot patients during walking by using in-shoe local shear stress and plantar pressure measurement systems. The shear force transducer based on the magnetic-resistive principle, was a rigid 3-layer circular disc. Shear transducers were mounted on the locations of four metatarsal heads and heel in the insole. Twelve normal subjects and three diabetic foot patients with diabetic neuropathy in the lateral heel participated in this study. The center of pressure in lateral heel diabetic foot patients moved more medially and directed toward the first, medial to the second metatarsal heads, and the hallux during late stance, making pressure at the medial heel and the second metatarsal head significantly larger than in the normal. Shear stress at the heel changed significantly in early stance and the magnitude of shear stresses in each metatarsal head also changed. Further studies would be very helpful to design foot orthoses in patients with diabetic neuropathy or other diseases.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.3
• /
• pp.9-16
• /
• 2007

Soil vapor extraction (SVE) is an effective and cost efficient method of removing volatile organic compounds (VOCs) and petroleum hydrocarbons from unsaturated soils. Incorporating PVDs in an SVE system can extend the effectiveness of SVE to lower permeability soils by shortening the air flow-paths and ultimately expediting contaminant removal. With this approach, the real bounded system is replaced for the purposes of analysis by an imaginary system of infinite areal extent. The boundary conditions for the contaminant remediation model test include constant head and no flow condition. Due to these parallel boundaries conditions, image wells should be developed in order to maintain the condition of no flow across the impermeable boundary. It is also assumed that the flow is drawdown along the constant head boundary condition. The factors contributing to the difference between the theoretical and measured pressure heads were also analyzed. The flow factor increases as the flow rate is increased. The flow rate is the most important factor that affects the difference between the measured and theoretical pressure heads.

• Journal of Korean Foot and Ankle Society
• /
• v.7 no.1
• /
• pp.36-40
• /
• 2003

Purpose: To investigate the relationship between radiographic parameters of the forefoot and plantar pressure in patients with hallux valgus. Materials and Methods: Plantar pressures of 21 patients with hallux valgus were examined with EMED-ST system. The data were compared with the parameters on the simple weightbearing dorsoplantar radiographs of the feet. The radiographic parameters that were measured were hallux valgus angle, 1-2 intermetatarsal angle, relative lengths of the metatarsals which were measured with the methods described by Maestro et al. and Okuda et al. Results: Statistically significant correlation was found between peak pressures under 2, 3 metatarsal heads and the relative lengths of 2, 3 metatarsals which were measured with the method described by Maestro et al. However they could explain only 13% of the pressures under the 2, 3 metatarsal heads by multivariate analysis. Conclusion: These results suggest that we cannot predict the plantar pressures under the foot with the parameters on the simple weightbearing dorsoplantar radiographs of the feet.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.77-95
• /
• 2003

Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. However, speed has not been taken into account in foot kinematics and kinetics during walking. This study examined the effect of walking speed on foot joint motion and peak plantar pressure during the walking phase. Eighty healthy subjects (40 men, 40 women) were recruited. Maximal dorsiflexion and excursion were measured at the first metatarsophalangeal joints during walking phase at three different cadences (80, 100, and 120 step/min) using a three dimensional motion analysis system (CMS70P). At the same time, peak plantar pressure was investigated using pressure distribution platforms (MatScan system) under the hallux heads of the first, second, and third metatarsal bones and heel. Maximal dorsiflexion and excursion and excursion at the ankle joint decreased significantly with increasing walking speed. Peak plantar pressure increased significantly under the heads of the first of the first, second, and third metatarsal bones, and heel with increasing walking speed: three was no change under the hallux. There were no significant changes in maximal dorsiflexion or excursion at the first metatarsophalangeal joint. The results show that walking speed should be considered when comparing gait parameters. The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot.

• Journal of Korean Physical Therapy Science
• /
• v.22 no.2
• /
• pp.43-47
• /
• 2015

Background : Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. This study examined the effect of walking speed on peak plantar pressure during the walking. Method : Thirty two normal healthy subjects (16 men, 16 women) were recruited. Peak plantar pressure was investigated using pressure distribution platforms (Pedoscan system) under the hallux heads of the first, second, and third metatarsal bones, and heel. Result : The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot(p<0.05). Conclusion : The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with restricted low extremity range of motion who have a high risk of skin breakdown under the forefoot.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.35-41
• /
• 2004

The water spray characteristics of the sprinkler heads is a very important factor affecting the fire suppression performance, and it is largely dependent on the shape of the head nozzle. This study investigated shape factors and spray distribution performances for the sprinkler heads of four domestic companies with big market shares. The experimental results revealed that all flow constants exceeded the required regulation limits, however showed big differences between head types although they have the same design limit. They were however relatively consistent regardless of the pressure increases. The spray distribution of some head samples showed severe directional eccentricity, which suggests more study for the improvement.