• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.35-42
• /
• 2019

Risk assessment and analysis for a medium-to-small sized chemical plant that manufactures a polyester resin by the process of batch-type condensation reaction was conducted using K-PSR technique which is one of the risk assessment methods used to implement the Process Safety Management System (PSM). K-PSR is a risk assessment technique developed by KOSHA to compensate for difficulties caused by the lack of infrastructure of medium-to-small sized chemical plants in the re-evaluation. To apply the K-PSR technique, the entire process of a selected chemical palnt was classified in two review sections, i.e., the condensation reaction process and the dilution/filtration process, and the potential risks of the process about these review sections were identified and classified based on the four guide-words (release, fire.explosion, process trouble, and injury). As the results of the research, refer to recommend of risk rating has been confirmed that non-destructive testing of old facilities and the preparation of LOTO procedures for the electrical equipments are necessary as specific measures to prevent the risk of release and fire.explosion. It was also shown that pressure gauges and thermometers should be installed on the hot-oil supply piping to minimize the process trouble, and exhausting hood should be installed to prevent potential injury.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.713-718
• /
• 2018

In many previous studies, monte carlo simulation is used to produce lead-free shielding sheet, and the possibility of radiation shielding capability and weight reduction is presented. But it is difficult to simulation for binder and micro-pores because of In fact it does not provide sufficient information necessary for the commercialization process. Therefore, in this paper, the results of radiation shielding capability corresponding to filling factor was presented by using the screen printing method to provide information on gel-paste required for the commercialization process. In this study, the geometric setup for evaluate of radiation shielding ability was designed to comply with IEC 61331-1:2014 and KS A 4025. In addition, radiation irradiation conditions were 100 kVp filtered with 2.0 mmAl total filtration was applied according to KS A 4021 standard. In this study, Pb $1270{\mu}m$, $BaSO_4$ $3035{\mu}m$, $Bi_2O_3$ $1849{\mu}m$ and $WO_3$ $2631{\mu}m$ were analyzed based on ten value layer. Additionally, the filling factor was analyzed as $BaSO_4$ 38.6%, $Bi_2O_3$ 27.1%, $WO_3$ 30.15%. However, in the case of applying low-temperature high-pressure molding in the future, it is expected that the radiation shielding capability can be sufficiently improved by reducing the porosity while increasing the filling factor.

• Childhood Kidney Diseases
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2023

Purpose: Angiotensin-converting enzyme inhibitors and angiotensin II receptor blockers (ARBs) are frequently employed to counteract the detrimental effects of proteinuria on glomerular diseases. However, the effects of ARBs remain poorly examined in pediatric patients with immunoglobulin A (IgA) nephropathy. Herein, we evaluated the efficacy and safety of losartan, an ARB, in pediatric IgA nephropathy with proteinuria. Methods: This prospective, single-arm, multicenter study included children with IgA nephropathy exhibiting proteinuria. Changes in proteinuria, blood pressure, and kidney function were prospectively evaluated before and 4 and 24 weeks after losartan administration. The primary endpoint was the difference in proteinuria between baseline and 24 weeks. Results: In total, 29 patients were enrolled and received losartan treatment. The full analysis set included 28 patients who received losartan at least once and had pre- and post-urinary protein to creatinine ratio measurements (n=28). The per-protocol analysis group included 22 patients who completed all scheduled visits without any serious violations during the study period. In both groups, the mean log (urine protein to creatinine ratio) value decreased significantly at 6 months. After 24 weeks, the urinary protein to creatinine ratio decreased by more than 50% in approximately 40% of the patients. The glomerular filtration rate was not significantly altered during the observation period. Conclusions: Losartan decreased proteinuria without decreasing kidney function in patients with IgA nephropathy over 24 weeks. Losartan could be safely employed to reduce proteinuria in this patient population. ClinicalTrials.gov trial registration (NCT0223277)

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.51-61
• /
• 2013

Researches on the oil recovery enhancement using the nanotechnology has recently been studied in the United States. The previous researches has focused mainly on the flow characteristics of nanoparticles in porous media, and the stability of the nano-emulsion itself. However, the analysis did not deal with the size effects between a nano-emulsion and the pore size which has an important role when nano-emulsion flows in the porous media. In this research, nano-based emulsion was fabricated which is able to be applied for the enhanced oil recovery techniques and its characteristics was analyzed. In addition, in order to identify the characteristics of nano-emulsions flowing through the porous media, the size effect was analysed by filtering test. According to the results, when the emulsion was fabricated, SCA(Silane Coupling Agent) or PVA(Poly Vinyl Alcohol) are added to improve the stability of emulsion. As the ratio of the decane to water increased, the viscosity of emulsion and the droplet size also increased. For the filtering test at the atmospheric conditions, the droplet did not go through the filter; only the separated water from the emulsion was able to be filtered. This phenomenon occurred because the droplet was not able to overcome the capillary pressure. At the filtering test by suction pressure, most of the emulsion was filtered over the filter size of $60{\mu}m$. However, the ratio of filtration was rapidly degraded at less than $45{\mu}m$ filters. This is caused due to deformation and destruction of the droplet by strong shear stress when passing through the pore. The results from the study on the basic characteristic of nano-emulsion and filtering test will be expected to play as the important role for the fabrication of the stable nano-emulsion or the research on the recovery of residual oil in porous media.

• Journal of Nutrition and Health
• /
• v.36 no.1
• /
• pp.9-17
• /
• 2003

The preparation method of a soluble dietary fiber from oak wood (Quercus mongolica) and the effect of the soluble dietary fiber on physiological function in rat fed high cholesterol diets was investigated. The best condition for steam explosion method was 25 kgf/㎤ pressure for 6 min. The exploded samples were delignified by the filtration treatment with 1% NaOH for several times, which is the best condition. The enzymatic hydrolysis of Cellusoft cellulase was more effective than Onozuka R-10 cellulase. The manufactured soluble dietary fiber was assayed using gel permeation chromatography (GPC) and it was dissolved in water. Average molecular weight distribution of manufactured soluble dietary fiber was about 348-1,200 and it was assumed the oligomer form fraction. In order to compare the manufactured soluble dietary fiber with commercial soluble dietary fiber (pectin) on the physiological function, Sprague-Dawley male rats weighing 100$\pm$10 g were randomly assigned to one normal diet and five high cholesterol diet containing 1% cholesterol. The high cholesterol diet groups were classified to fiber free diet (FF group), 5% pectin (5P group), 10% pectin (l0P group), 5% manufactured soluble dietary fiber (5M group) and 10% manufactured soluble dietary fiber (10M group). Body weight gains in all soluble dietary fiber groups were lower than FF group. Food intakes were increased in all soluble dietary fiber groups than that of FF group. Food efficiency ratio (FER) was significantly decreased in all soluble dietary fiber groups than that of the FF group, and it was especially was highest in 10% supplemented soluble dietary fiber group. The weight of liver of the soluble dietary fiber supplemented groups were lower than those of the FF group, but weights of cecum and small intestine of all supplemented soluble dietary fiber groups were significantly increased, compared with that of FF group. The weights and water contents in feces were significantly increased by the soluble dietary fiber. The activity of the glutamic oxaloacetic transaminase in soluble dietary fiber groups were significantly decreased than those of FF group. The hepatic glutathione S-transferase activity in all soluble dietary fiber supplemented groups were higher than that of FF group. The physiological effects of the manufactured soluble dietary fiber are the same as the commercial soluble dietary fiber (pectin). The preparation method of the soluble dietary fiber from the oak chips suited to its purpose. (Korean J Nutrition 36(1) : 9~17, 2003)

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.151-161
• /
• 1986

In order to develop sensitive and sepcific assay methods for E. coli heat labile enterotoxin(LT) hybridoma cell lines secreting LT specific monoclonal antibody were obtained. LT was purified from cell lysate of E. coli O15H11. The steps included disruption of bacteria by French pressure, DEAE Sephacel ion exchange chromatography, Sephadex G200 gel filtration, and second DEAE Sephacel ion exchange chromatography, successively. Spleen cells from Balb/c mice immunized with the purified LT and $HGPRT^{(-)}$ plasmacytomas, $P3{\times}63Ag8.V653$ were mixed and fused by 50% (w/v) PEG. Hybrid cells were grown in 308 wells out of 360 wells, and 13 wells out of them secreted antibodies reacting to LT. Among these hybridoma cell 1G8-1D1 cell line was selected since it had produced high-titered monoclonal antibody continuously. By using culture supernatant and ascites from 1G8-1D1 cells the monoclonal antibody was characterized, and an assay system for detecting enterotoxigenic E. coli was established by double sandwich enzyme-linked immunosorbent assay (ELISA). The following results were obtained. 1. Antibody titers of culture supernatant and ascites from 1G8-1D1 hybridoma cells were 512, and 102, 400, respectively by GM1-ELISA and its immunoglobulin class was IgM. 2. The maximum absorption ratio of 1G8-1D1 cell culture supernatant to LT was 90% at $300\;{\mu}g/ml$ of LT concentration. LT concentration shown at 50% absorption ratio was $103.45{\mu}g$ and the absorption ratio was decreased with tile reduction of LT concentration. This result suggests that monoclonal antibody from 1G8-1D1 hybridoma cell bound with LT specifically. 3. The reactivities of 1G8-1D1 cell culture supernatant to LT and V. cholerae enterotoxin(CT) were 0.886 and 0.142(O.D. at 492nm) measured by the GM1-ELISA, indicating 1G8-1D1 monoclonal antibody reacted specifically with LT but not with CT. 4. The addition of 0.1ml of ascites to 0.6mg and 0.12mg of LT decreased the vascular permeability factor to 41% and 44% respectively, but it did not completely neutralize LT. 5. By double sandwich ELISA using monoclonal antibody, as little as 75ng of the purified LT per ml could be detected. 6. The results by assay of detecting LT in culture supernatants of 14 wild strains E. coli isolated from diarrhea patients by the double sandwich ELISA were almost the same level as those by reverse passive latex agglutination.