• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1726-1732
• /
• 2008

사출성형은 다양한 형태의 제품을 대량 생산할 수 있는 플라스틱 성형 공법중의 하나이다. 플라스틱 제품을 만들기 위해서는 고상의 재료를 액상으로 녹인 후 다시 고상으로 굳히는 과정을 거치는 데, 이 과정 중에 많은 문제점들이 발생을 하게 된다. 과거에는 이러한 문제를 해결하기 위해서 성형 후 금형 설계 변경 등의 시행착오적 방법을 사용하였으나, 성형과정에 대한 사출성형 CAE(Computer Aided Engineering)를 적용함으로써, 사전에 문제점을 파악하는 기술이 도입되었다. 플라스틱 제품의 큰 문제점 중 하나가 치수안정성이다. 특히 박막사출성형품은 게이트의 위치, 냉각채널과 온도에 따라서 변형량이 크게 달라진다. 본 연구에서는 현재 Stackmold방식으로 4개의 Cavity에 4개의 Hot-Runner가 설치된 금형을 통해 생산중인 DVD Tray 박막사출제품의 생산 원가 절감을 위해서 Cavity하나에 한 개의 Hot-Runner를 설계하기 위해서 CAE 해석을 통해 게이트의 위치, 냉각채널과 온도에 따라 비교하여 해석해 최적의 제품 설계를 하였다. CAE 해석에는 상업화된 CAE 프로그램인 Moldflow를 사용하였고, 수지는 PC+ABS를 사용하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.232-232
• /
• 2019

The persistence of drought periods and water scarcity is a growing public concern, as climate change projections indicate a more critical scenario in the future. The sustainability of water resources for the increasing population, and to ensuring crop production will unarguably be a daunting task for the water resources managers, with a projected 9.8 billion people by 2050 as well as the need to increase food production by 70 to 100%. Consequently, there is a need for significant irrigation water use for more crop production in the face of stiff competition among water users. However, the available natural resources are already over-constrained, and the allocation of more resources for food production is not feasible. Currently, about two-thirds of global water withdrawer is used by the agricultural sector while 48% of water resources in Korea is used for agricultural production. Despite the apparent ecological deficit and unfavorable conditions of resources utilization, a staggering amount of food waste occurs in the country. Moreover, wastage of food translates to waste of all the resources involved in the food production including water resources. Food waste can also be considered a serious potential for economic and environmental problems. Hence, exploring an alternative approach to efficient resources utilization in a more sustainable way can ensure considerable resources conservation. We hypothesized that reducing food waste will decline the demand for food production and consequently reduce the pressure on water resources. We investigated the food wastage across the food supply chain using the top-down datasets based on the FAO mass balance model. Furthermore, the water footprint of the estimated food wastage was assessed using the representative of selected food crops. The study revealed that the average annual food wastage across the food supply chain is 9.05 million tonnes, signifying 0.51 kg/capita/day and 48% of domestic food production. Similarly, an average of 6.29 Gm3 per annum of water resources was lost to food wastage, which translates to 40% of the total allotted water resources for agriculture in the country. These considerable resources could have been conserved or efficiently used for other purposes. This study demonstrated that zero food waste generation would significantly reduce the impact on freshwater resources and ensure its conservation. There is a need for further investigation on the food waste study using the bottom-up approach, specifically at the consumer food waste, since the top-down approach is based on estimations and many assumptions were made.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.408-408
• /
• 2019

The persistence of drought periods and water scarcity is a growing public concern, as climate change projections indicate a more critical scenario in the future. The sustainability of water resources for the increasing population, and to ensuring crop production will unarguably be a daunting task for the water resources managers, with a projected 9.8 billion people by 2050 as well as the need to increase food production by 70 to 100%. Consequently, there is a need for significant irrigation water use for more crop production in the face of stiff competition among water users. However, the available natural resources are already over-constrained, and the allocation of more resources for food production is not feasible. Currently, about two-thirds of global water withdrawer is used by the agricultural sector while 48% of water resources in Korea is used for agricultural production. Despite the apparent ecological deficit and unfavorable conditions of resources utilization, a staggering amount of food waste occurs in the country. Moreover, wastage of food translates to waste of all the resources involved in the food production including water resources. Food waste can also be considered a serious potential for economic and environmental problems. Hence, exploring an alternative approach to efficient resources utilization in a more sustainable way can ensure considerable resources conservation. We hypothesized that reducing food waste will decline the demand for food production and consequently reduce the pressure on water resources. We investigated the food wastage across the food supply chain using the top-down datasets based on the FAO mass balance model. Furthermore, the water footprint of the estimated food wastage was assessed using the representative of selected food crops. The study revealed that the average annual food wastage across the food supply chain is 9.05 million tonnes, signifying 0.51 kg/capita/day and 48% of domestic food production. Similarly, an average of $6.29Gm^3$ per annum of water resources was lost to food wastage, which translates to 40% of the total allotted water resources for agriculture in the country. These considerable resources could have been conserved or efficiently used for other purposes. This study demonstrated that zero food waste generation would significantly reduce the impact on freshwater resources and ensure its conservation. There is a need for further investigation on the food waste study using the bottom-up approach, specifically at the consumer food waste, since the top-down approach is based on estimations and many assumptions were made.

• Journal of Chest Surgery
• /
• 제35권4호
• /
• pp.267-273
• /
• 2002

배경: 저자들은 한국인에 있어서의 급성대동맥박리에 대한 nicardipine의 혈압강하요법에 대한 임상적 유용성을 검토하고자 국내 제4상 임상시험을 실시하였다. 대상 및 방법: 31명의 대동맥 질환 환자에서 시험약의 투여 전후의 수축기 및 이완기 혈압, 심박수 등을 시간변화에 따라 비교 관찰하였다. 시험약식 투여기간은 원칙적으로 3일 이상 14일 이하로 하였으며, 투여 3일째의 평균혈압강하도를 평가하였다. 시험약 사용전 다른 강압제를 사용하고 있었던 경우는 기존 사용약제의 용량을 줄이면서 시험약으로 대체하여 결국 기존 사용약제를 사용하지 않는 것을 원칙으로 하였다. 결과: 연구의 대상이 된 환자는 급성 대동맥 박리가 28명, 대동맥궁류 파열이 2명, 외상성 대동맥 파열이 1명이었다. 연령은 53.9$\pm$14.9(29~89)세였고, 남자가 21명 (67.7%)이었다. 대동맥질환에 기인한 합병증은 대동맥판 폐쇄부전이 7례, 혈성심낭 6례, 급성 신부전 1례, 하지마비 1례, 하지허혈 1례 등이었다. 목표혈압 도달은 15분이내가 16례로 가장 많았고, 15분이상 30분이내가 10명, 30분이상 45분이내가 3명, 45분이상 60분 이내에 도달한 경우가 2명이었다. 관찰기 혈압은 수축기혈압, 이완기혈안, 평균혈압이 각각 147$\pm$23mmHg, 82.3$\pm$18.6mmHg, 104$\pm$18mmHg이었고, 3일째 측정하였을 때 119$\pm$12mrnHg, 69$\pm$grnmHg, 86$\pm$BmmHg로 의미있게 감소하였음을 확인하였다. Nicardipine 투여 종료 시에측정한 수축기 혈압, 이완기혈압, 평균혈압은 각각 119$\pm$ 15mmHg, 70$\pm$ 14mmHg, 86$\pm$ 13mmHg로 3일째 측정한 혈압과 비교하였을 때 의미있는 상승 혹은 하강현상은 관찰되지 않았고 비교적 혈압 하강 상태가 잘 유지되고 있음을 알 수 있었다. 지속적 정맥 투여 중 부작용은 뚜렷하게 관찰할 수 없었다. 결론: 대동맥 박리에 동반된 고혈압에서 nicardipine을 사용하여 만족할만한 혈압하강 효과를 얻었으며, 뚜렷한 부작용이 없이 안전하게 사용할 수 있다는 결론을 내렸다.

• 한국지반공학회논문집
• /
• 제28권7호
• /
• pp.5-16
• /
• 2012

쏘일네일링 공법은 흙막이 또는 사면안정을 위해서 가장 많이 사용되는 공법이다. 일반적으로 쏘일네일링 공법의 설계에서는 인발에 의한 파괴와 전단에 의한 파괴를 고려한다. 쏘일네일링의 파괴거동은 인발파괴와 전단파괴와 같이 파괴면을 가지면서 사면이 무너지는 경우도 발생하지만 굴착에 의해서 사면 표면의 수평응력이 감소함에 따라 점점 표면이 쓸려가는 얕은 파괴에 의해서 파괴에 이르는 경우가 실제 현장에서 자주 발생하게 된다. 따라서 쏘일네일링의 파괴거동을 크게 인발파괴, 전단파괴, 그리고 얕은파괴로 나누어 정의하였다. 본 논문에서는 각각의 파괴모드에 대한 제약조건을 이론적으로 산정하였다. 또한 각각의 파괴를 막기 위한 설계 최적화를 실시하였으며, 네일링의 정착길이, 개수, 그리고 얕은파괴를 막기 위한 전면에서의 최소 구속압을 설계변수로 두어 최적화 과정을 진행하였다. 최적화 과정은 먼저 네일링의 정착길이와 인장력을 설계변수로 하여 인발파괴 및 전단파괴에 대하여 최적화를 실시한다. 다음으로 각 굴착단계별 사면의 표면에서 얕은파괴를 막기 위한 최소의 구속압을 산정한 후 최적화를 반복수행하여 각각의 설계 변수를 산정하게 된다. 이와 같은 설계 최적화 프로그램을 통해서 인발파괴와 전단파괴만을 고려하는 기존의 설계 시스템에서 프리스트레스까지 산정할 수 있게 되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• 한국진공학회지
• /
• 제22권3호
• /
• pp.111-118
• /
• 2013

대기압 플라즈마 제트 장치의 유량 변화에 대한 플라즈마 방전 특성을 실험적으로 조사하고 이를 유체역학적으로 해석하였다. 유리관에 주입되는 아르곤 기체의 유량 변화에 대한 레이놀즈 수(Re)로 결정되는 기체 흐름의 형태 변화와 베르누이 정리에 의한 압력 변화가 플라즈마 발생에 영향을 준다. 유리관 내부에 발생하는 플라즈마의 길이 변화의 실험을 통하여, 아르곤 기체에 대한 레이놀즈 수가 Re<2,000이면 층류이고, Re>4,000이면 난류가 형성된다. 이는 일반 유체에서 알려진 결과와 일치한다. 층류에서 유량의 증가로 플라즈마의 길이가 증가한다. 층류와 난류의 전환 영역에서 플라즈마의 길이는 줄어든다. 난류 영역에서는 방전 기체의 흐름이 불규칙함으로서 방전 경로가 흐트러져 플라즈마 칼럼의 길이가 매우 짧아지고 급기야 플라즈마가 소멸된다. 층류에서 주입 유량의 증가로 유리관 내의 유속이 증가하면, 베르누이 정리에 의하여 유리관 내부의 압력이 낮아진다. 관내의 압력이 낮아지면, 파센 법칙에 의하여 관내의 전기장의 세기가 증가하여 방전 전압이 낮아진다. 따라서 주입 유량이 증가하면, 동일한 구동 전압에서 유리관에 발생하는 플라즈마의 길이는 길어진다. 층류의 방전은 유리관 밖에서도 층류의 흐름이 일정 길이로 유지되므로 시료 표면에 조사되는 플라즈마 빔의 직경은 유리관의 직경 이하로 유지된다.

• 대한한방내과학회지
• /
• 제32권2호
• /
• pp.153-169
• /
• 2011

Objectives : This study was performed to investigate the anti-fibrogenic effect and the effect on cell growth and apoptosis in YJCGT, YJCGT YSO and YJCGT YSCO on thioacetamide-induced rat liver tissue and the immortalized human hepatic cell line LX2. Materials and Methods : LX2 cells were treated with various concentrations (0, 50, 150, 300 ug/ml) of YJCGT, Y+YSO, and Y+YSCO extract for 24, 48 and 72 hours. After the treatment, cell viability was measured by using MTT assay. Caspase inhibitor assay, and cell viability were determined by a colorimetric assay with PMS/MTS solution. Rat liver fibrosis was induced by intraperitoneal thioacetamide injection 150 mg/kg 3 times a week for 5 weeks. After the treatment, body weight, liver & spleen weights, liver function test, the complete blood cell count and the change of portal pressure were studied. After YJCGT, Y+YSO, and Y+YSCO treatment, percentages of collagen in thioacetamide-induced rat liver tissue were measured. Results : The viability of the LX2 cell decreased in a dose- and time-dependent manner. Exposure of LX2 cells to YJCGT, YJCGT+YSO and YJCGT+YSCO induced caspase-3 activation, but co-treatment of YJCGT, YJCGT+YSO and YJCGT+YSCO with the pan-caspase inhibitor Z-VAD-FMK, and the caspase-3 inhibitor Z-DEVE-FMK, blocked apoptosis. There was no difference in rat body weight between the thioacetamide only group and the YJCGT, YJCGT+YSO and YJCGT+YSCO groups. In the YJCGT, YJCGT YSO and YJCGT YSCO groups, the serum level of GPT significantly went down compared with the thioacetamide only group. In the YJCGT, Y+YSO, Y+YSCO groups, white blood cell elevated by thioacetamide injection decreased but RBC, Hgb, and Hct increased. In the Y+YSO group, the portal pressure elevated by thioacetamide injection significantly decreased. In the histological finding, thioacetamide injections caused severe fibrosis, but YJCGT, Y+YSO, and Y+YSCO treatment significantly reduced the amounts of hepatic collagens. Conclusions : YJCGT, Y+YSO, and Y+YSCO inhibit the growth of LX2 cells by inducing apoptosis through caspase activity. YJCGT, Y+YSO, and Y+YSCO have beneficial effects on the treatment of cirrhotic patients as well as patients with chronic hepatitis.