• 한국터널지하공간학회 논문집
• /
• 제6권4호
• /
• pp.315-326
• /
• 2004

터널 주변지반에 다양한 형태로 존재하는 불연속면이 터널 라이닝의 거동에 미치는 영향을 규명하기 위해, 주절리의 각도와 지반의 측압조건을 변화시켜가면서 실내모형실험을 수행하였다. 실험결과, 터널라이닝에 발생하는 축력은 터널 주변지반에 존재하는 절리의 방향 및 위치에 따라 대체로 감소하는 경향을 나타내며, 이러한 경향은 측압계수가 증가함에 따라 더욱 두드러진 양상을 보이고 있다. 또한 절리각도에 따라 터널라이닝에 발생하는 최대변위와 최대응력의 발생위치가 달라지며, 절리의 영향으로 측압계수가 증가함에 따라 접선응력과 법선응력이 최대 20배 이상의 차이를 보이며, 전반적으로 터널 라이닝에는 인장응력이 집중되는 경향을 탄성이론을 통해 확인하였다.

• Wind and Structures
• /
• 제20권1호
• /
• pp.37-58
• /
• 2015

As wind flows around a sharp-edged body, the resulting separated flow becomes complicated, with multiple separations and reattachments as well as vortex recirculation. This widespread and unpredictable phenomenon has long been studied academically as well as in engineering applications. In this study, the flow characteristics around rectangular prisms with five different aspect ratios were determined through wind tunnel experiments and a detached eddy simulation, that placed the objects in a simulated deep turbulent boundary layer at $Re=4.6{\times}10^4$. A series of rectangular prisms with the same height (h = 80 mm), different longitudinal lengths (l = 0.5h, h, and 2h), or different transverse widths (w = 0.5h, h, and 2h) were employed to observe the effects of the aspect ratio. Furthermore, five wind directions ($0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $45^{\circ}$) were selected to observe the effects of the wind direction. The simulated results of the surface pressure were compared to the wind tunnel experiment results and the existing results of previous papers. The vortex and spectrum were also analyzed to determine the detailed flow structure around the body. The paper also highlights the pressure distribution around the rectangular prisms with respect to the different aspect ratios. With an increasing transverse width, the surface suction pressure on the top and side surfaces becomes stronger. In addition, depending on the wind direction, the pressure coefficient experiences a large variation and can even change from a negative to a positive value on the side surface of the cube model.

• Tribology and Lubricants
• /
• 제2권1호
• /
• pp.61-68
• /
• 1986

Effects of the ram-pressure on the THD-performance of pivoted pad thrust bearings are investigated experimentally. A sector-shaped tilting pad thrust bearing and a rotating disk are used. Temperature distribution on the disk surface as well as on the pad surface, distribution of the pressure generated within the fluid film, and the film thickness are measured continuously in the circumferential direction after thermal equilibrium is established. The ram-pressure is proportional to the mean pressure of oil film and to the rotational speed of the disk and affects the maximum pressure and the pressure distribution. The temperature rise on the mating surface of the disc and the pad, contacting with the oil film, is proportional to to the bearing load and the disk speed. The ram-pressure and the temperature rise on the disk surface are dominant factors that affect the THD-performance of pivoted pad thrust bearings.

• 지구물리
• /
• 제6권2호
• /
• pp.107-119
• /
• 2003

The behavior of pore pressure and effective stress in a highly saturated sand bed under variations in the water pressure in its surface were investigated to determine the mechanism of the collapse of hydraulic structures during flooding or when attacked by storm waves. The vertical, one-dimensional model was used as a basic model to clarify the effect of water pressure variation on only to the vertical direction. The theoretical results show that a sand bed under variations of water pressure is weakened by an increase in excess pore pressure and that under certain conditions the sand bed will liquefy. Although many factors related to water pressure variation and property of the material determine this phenomenon, the mist important factor seems to be the small amount of air present in the sand bed. The theoretical results reported are verified by experiments.

• 한국의류학회지
• /
• 제12권2호
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.

• 전산구조공학
• /
• 제9권4호
• /
• pp.189-198
• /
• 1996

콘크리트 중력댐 상부면의 균열에 작용하는 수압의 영향을 주로 고려하여 댐의 파괴거동을 조사하였다. 첫째, 표면적분법에 의하여 응력확대계수를 구하는 경우에 작용하는 수압의 형태를 등분포형태 외에, 삼각형 분포 및 포물선분포도 고려하여 보았다. 둘째, FRANC(FRacture Analysis Code)를 이용하여 균열면에 작용하는 수압의 형태에 따른 기존균열의 전파방향을 추적하였다. 셋째, 월류수위 아래에서 균열이 전파되지 않을 수 있는 한계균열길이를 수압의 분포형태에 따라 구분하여 구하여 보았다. 표면적분법으로 수압의 형태에 따라 응력확대계수를 구한 결과는 FRANC를 이용하여 얻어진 결과와 비교 되었으며 비교적 잘 일치함을 알 수 있었다. 균열면에 작용하는 수압의 형태가 삼각형분포의 경우에 균열의 전파방향은 등분포의 경우에 비하여 댐의 기초쪽으로 기우는 것을 알 수 있었으며, 또한 월류수위 아래에서 한계균열길이는 댐높이의 대략 2/5-1/2되는 곳에서 최대가 됨을 알 수 있었다.

• 대한임상전기생리학회지
• /
• 제1권2호
• /
• pp.69-76
• /
• 2003

The purpose of this study was to determine the effect of transcutaneous electrical nerve stimulation(TENS) on the alteration of pressure pain threshold of myofascial trigger points. We used fifty nine patients with upper trapezius mayofascial pain syndrome. Participants classified according to each group in conventional TENS(high rate, low intensity) and acupuncture like TENS(low rate, high intensity). The test was measured continuously pre test, post-test by algometer. The following results were obtained; 1. Pressure pain threshold were significantly increased in all groups(p<.001). 2. In comparison between groups, pressure pain threshold were not significantly differenced. These results lead us to the conclusion that each method by TENS were significantly increased pressure pain threshold of upper trapezius trigger points. Therefore, a further direction of this study will be to provide more evidence that TENS method have an effect on pressure pain threshold of myofascial trigger points.

• Structural Engineering and Mechanics
• /
• 제13권3호
• /
• pp.329-343
• /
• 2002

In this research, the dynamic stability of an orthotropic elastic conical shell, with elasticity moduli and density varying in the thickness direction, subject to a uniform external pressure which is a power function of time, has been studied. After giving the fundamental relations, the dynamic stability and compatibility equations of a nonhomogeneous elastic orthotropic conical shell, subject to a uniform external pressure, have been derived. Applying Galerkin's method, these equations have been transformed to a pair of time dependent differential equations with variable coefficients. These differential equations are solved using the method given by Sachenkov and Baktieva (1978). Thus, general formulas have been obtained for the dynamic and static critical external pressures and the pertinent wave numbers, critical time, critical pressure impulse and dynamic factor. Finally, carrying out some computations, the effects of the nonhomogeneity, the loading speed, the variation of the semi-vertex angle and the power of time in the external pressure expression on the critical parameters have been studied.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1449-1457
• /
• 1997

Since a non-nulling method of five-hole probes is valid only when the flow angle is within the calibrated angle range, it can not be used in a complex flow field. Full angle range pressure coefficient maps show that widely used nulling methods do not guarantee correct alignment of the probe with the flow direction in the unknown complex flow field. Zone decision method and features of zone map were studied by investigating the full angle range pressure coefficient maps. A reliable and efficient new nulling algorithm using zone decision by pressure ordering is proposed and verified. Since the zone decision method by pressure ordering can decide whether the flow is within the calibration angle range or not, it is useful in wide angle nonnulling methods, too.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.580-583
• /
• 2012

The dependency of processing pressure on the electrical performances in amorphous silicon-zinc-tin-oxide thin film transistors (SZTO-TFT) has been investigated. The SZTO channel layers were deposited by using radio frequency (RF) magnetron sputtering method with different partial pressure. The field effect mobility (${\mu}_{FE}$) increased and threshold voltage ($V_{th}$) shifted to negative direction with increasing pressure during deposition processing. As a result, oxygen vacancies generated in SZTO channel layer with increasing partial pressure resulted in negative shift in $V_{th}$ and increase in on-current.