건조 모래지반의 상대밀도에 따른 무리말뚝의 동적거동특성 (Dynamic Behavior Characteristics of Group Piles with Relative Density in Sandy Soil)
-
- 한국지반환경공학회 논문집
- /
- 제24권9호
- /
- pp.33-40
- /
- 2023
지진 시 상부구조물을 지지하는 말뚝기초에 가해지는 수평 하중은 상부구조물의 관성력과 지반의 운동력으로 구분된다. 상부구조물의 관성력과 지반의 운동력은 서로 다른 복잡한 메커니즘을 통해 말뚝기초에 피해를 입힐 수 있기 때문에 지반-말뚝-구조물의 상호작용을 적절히 예측하고 평가하는 것이 말뚝기초의 안전한 내진설계를 위해 필요하다. 지반-말뚝-구조물의 상호작용은 구조물의 동적특성, 말뚝의 길이, 두부 경계조건 및 지반의 상대밀도에 영향을 받는다. 지반의 상대밀도가 달라지면 그에 따른 구속압 및 지반 강성이 변화하며 결과적으로 지반반력계수도 각 시스템에 따라 달라지게 된다. 말뚝기초의 수평방향 지지거동 및 극한 지지력은 수평방향 하중조건 및 모래지반의 상대밀도에 따라 다르게 나타난다. 이에 본 연구에서는 건조된 모래지반의 상대밀도가 상부구조물을 지지하는 무리말뚝의 동적거동에 미치는 영향을 확인하기 위해 1g 진동대 모형실험을 수행하였다. 그 결과 상대밀도가 증가함에 따라 상부구조물의 가속도는 증가하고 말뚝캡의 가속도는 감소하는 것으로 확인되었으며, 말뚝의 p-y 곡선의 기울기는 감소하는 것으로 확인되었다.
브로민화 수은(I)(Hg2Br2) 물리적 증착법 공정에서 구성요소 B의 분압, PB를 40 Torr에서 200 Torr로 증가시켰을 때 1개의 셀(unicell)이 결정성장영역에서 기체상 공간의 중심으로 이동함을 보여주고 있다. PB = 40 Torr에서는 경계층 흐름이 지배적이고, PB = 200 Torr에서는 코어영역흐름(core region)을 보이고 있다. 고려되는 물리적 증착법 공정에서 PB = 40 Torr와 PB = 200 Torr에서 1개(single)의 셀(cell) 형태로 3차원의 유동의 흐름과 x, y 직교 중심축에 대하여 비대칭 유동흐름을 나타내고 있다. 소스와 결정 영역 사이의 임계 온도차는 약 30 K입니다. Hg2Br2의 총 몰 플럭스는 임계값에 도달할 때까지 온도차에 따라 증가한다. 임계 총 몰 플럭스에서 총 몰 플럭스는 갑자기 감소한다.
도로 경계석은 보도와 차도의 경계부에 설치하는 구조물로서 노면배수, 시선유도 등의 목적으로 사용된다. 현재 일반적인 경계석의 시공법은 경계석 기초 콘크리트를 타설한 후 콘크리트가 경계석을 지지할 수 있는 강도에 도달할 때까지 기다렸다가 경계석을 거치하고 측구 및 후면 보강콘크리트를 타설하는 공법을 사용하고 있다. 이러한 공법은 콘크리트의 분할 타설에 따른 콘크리트의 다짐 불량 및 부착강도 저하로 경계석이 차량충돌이나 토압 등에 의해 쉽게 분리되어 유지보수 비용발생과 미관을 저해하고 있다. 이러한 재래식 공법을 개선하고자 경계석과 측구를 동시에 시공할 수 있는 거푸집 레일과 지그를 이용한 일체형 시공법을 제안하였으며, 구조적 성능을 평가하기 위하여 횡 방향 재하시험, 인발 시험, 휨 시험과 같은 정적 시험을 실시하였고, 펜들럼 시험 및 실물차량 충돌 시험과 같은 동적 시험을 통한 성능평가를 실시하였다. 검토 결과 거푸집 레일과 지그를 이용한 일체형 시공법은 재래식 공법에 비해 콘크리트의 시공품질이 개선되고 부착강도가 증가하여 모든 시험에서 우수한 것으로 나타났다.
일반적으로 주조품은 복잡한 형상을 가지고 있고, 한 제품 내에서 두께의 차이가 현저하게 나는 경우가 있어 시뮬레이션을 위한 격자를 생성할 때 어려움이 있다. 주조 유동은 이상유동으로 수치해석을 할 때 공기와 용탕의 경계면을 추적해야하며 밀도차에 의한 압력장 계산에 많은 시간이 소요된다. 이와 같은 이유로 주조유동해석에는 직교격자가 주로 이용되어왔다. 그러나 직교격자는 형상을 제대로 표현하지 못한다. 곡면에서 나타나는 계단형상 격자로 인해 모멘텀 손실이 발생하고 이로 인해 용탕의 흐름이 달라질 수 있으며 결과적으로 잘못된 주조 방안 설계를 할 수 있다. 이를 피하기 위하여 직교격자계에서 형상을 좀 더 정확하게 표현하기 위하여 많은 수의 격자를 생성하여 해석을 한다. 또는 직교격자계에서 발생하는 문제를 수치적으로 보완하는 Cut Cell 방법을 적용하여 해석하는 방법이 있다. 본 연구에서는 직교격자계에서 주조유동해석을 할 때 격자수에 따른 해석결과와 Cut Cell 방법을 적용한 해석 결과를 비교하였다. 또한 주조공정별로 실제제품을 주조유동해석을 하고 공정별로 Cut Cell 방법을 적용한 결과를 고찰하였다.
The Chosen Supergroup (Cambro-Ordovician), mid-east Korea consists mainly of shallow marine carbonates and contains a variety of limestone conglomerates. These conglomerates largely comprise oligomictic, rounded lime-mudstone clasts of various size and shape (equant, oval, discoidal, tabular, and irregular) and dolomitic shale matrices. Most clasts are characterized by jigsaw-fit (mosaic), disorganized, or edgewise fabric and autoclastic lithology. Each conglomerate layer is commonly interbedded with limestone-dolomitic shale couplets and occasionally underlain by fractured limestone layer, capped by calcareous shale. According to composition, characteristic sedimentary structures, and fabric, limestone conglomerates in the Hwajol, Tumugol, Makkol, and Mungok formations of Chosen Supergroup can be classified into 4 types: (1) disorganized polymictic conglomerate (Cd), (2) horizontally stratified polymictic conglomerate (Cs), (3) mosaic conglomerate (Cm), and (4) disorganized/edgewise oligomictic conglomerate (Cd/e). These conglomerates are either depositional (Cd and Cs) or diagenetic (Cm and Cd/e) in origin. Depositional conglomerates are interpreted as storm deposits, tidal channel fills, or transgressive lag deposits. On the other hand, diagenetic conglomerates are not deposited by normal sedimentary processes, but formed by post-depositional diagenetic processes. Diagenetic conglomerates in the Chosen Supergroup are characterized by autoclastic and oligomictic lithology of lime-mudstone clasts, jigsaw-fit (mosaic) fabric, edgewise fabric, and a gradual transition from the underlying bed (Table 1). Autoclastic and oligomictic lithologies may be indicative of subsurface brecciation (fragmentation). Consolidation of lime-mudstone clasts pre-requisite for brecciation may result from dissolution and reprecipitation of CaCO3 by degradation of organic matter during burial. Jigsaw-fit fabric has been considered as evidence for in situ fragmentation. The edgewise fabric is most likely formed by expulsion of pore fluid during compaction. The lower boundary of intraformational conglomerates of depositional origin is commonly sharp and erosional. In contrast, diagenetic conglomerate layers mostly show a gradual transition from the underlying unit, which is indicative of progressive fragmentation upward (Fig. 1). The underlying fractured limestone layer also shows evidence for in situ fragmentation such as jigsaw-fit fabric and the same lithology as the overlying conglomerate layer (Fig, 1). Evidence from the conglomerate beds in the Chosen Supergroup suggests that diagenetic conglomerates are formed by in situ subsurface fragmentation of limestone layers and rounding of the fragments. In situ subsurface fragmentation may be primarily due to compaction, dewatering (upward-moving pore fluids), and dissolution, accompanying volume reduction. This process commonly occurs under the conditions of (1) alternating layers of carbonate-rich and carbonate-poor sediments and (B) early differential cementation of carbonate-rich layers. Differential cementation commonly takes place between alternating beds of carbonate-rich and clay-rich layers, because high carbonate content promotes cementation, whereas clay inhibits cementation. After deposition of alternating beds and differential cementation, with progressive burial, upward-moving pore fluid may raise pore-pressure in the upper part of limestone layers, due to commonly overlying impermeable shale layers (or beds). The high pore-pressure may reinforce propagation of fragmentation and cause upward-expulsion of pore fluid which probably produces edgewise fabric of tabular clasts. The fluidized flow then extends laterally, causing reorientation and further rounding of clasts. This process is analogous to that of autobrecciation, which can be analogously termed autoconglomeration. This is a fragmentation and rounding process whereby earlier semiconsolidated portions of limestone are incorporated into still fluid portions. The rounding may be due mainly to immiscibility and surface tension of lime-mud. The progressive rounding of the fragmented clasts probably results from grain attrition by fluidized flow. A synthetic study of limestone conglomerate beds in the Chosen Supergroup suggests that very small percent of the conglomerate layers are of depositional origin, whereas the rest, more than
최근 송림 조산운동시기인 트라이아스기에 홍성 지역의 에클로자이트와 경기육괴 내에 광범위하게 나타나는 충돌 후 화성암이 형성되었음이 확인되었다. 이러한 새로운 발견에 의해 1980년대 말에 확인된 남중국판과 북중국판의 충돌대인 트라이아스기 친링-다비-수루 충돌대가 한반도의 홍성 지역으로 연결된 후 양평 지역을 거쳐 오대산 지역으로 연결되는 모델이 제시되었다. 그 이후 충돌대는 일본 서남부의 고생대 섭입 복합체와 북한의 고생대 섭입 복합체인 연변대로 연결될 가능성이 높다. 이럴 경우 경기육괴는 홍성-양평-오대산 충돌대를 경계로 나뉘어져야하며 충돌대 북부는 북중국판에 남부는 남중국판에 대비될 것이다. 남중국판과 북중국판의 충돌은 페름기에 한반도로부터 시작하여 중국 쪽으로 진행되었으며 트라이아스기 말에 충돌이 완료되었다. 다비-수루-홍성-양평-오대산 충돌대를 따라 동측에서 서측으로 변성조건이 체계적으로 변화한다. 가장 동측에 해당하는 오대산 지역에서는 245-230 Ma 초고온 변성작용이 한반도의 서측에 해당하는 홍성지역에서는 230Ma 고압변성작용이 그리고 중국의 수루, 다비 지역에서는 220Ma의 초고압 변성작용이 일어났다. 충돌대를 따라 나타나는 체계적인 변성조건의 변화는 충돌 전 섭입된 해양지각의 양이 동측에서 서측으로 증가하여 섭입하던 대륙판과 해양판의 분리되는 깊이가 동측에서 서측으로 점차 증가하였기 때문인 것으로 생각된다. 한반도 남부 영남육괴와 남중국판 남부에 광범위하게 나타나는 페름기-트라이아스기 섭입관련 화성암은 북중국판과 남중국판의 페름기-트라이아스기 충돌이 남중국판 남쪽 경계부에서의 섭입작용을 시작시켰을 가능성이 있음을 지시한다. 즉 한반도의 송림 조산운동 시기에는 경기육괴지역에서 대륙충돌이 일어나 한반도가 형성되었으며 동시에 대륙충돌에 의해 영남육괴 남측에 섭입대를 형성되었을 것으로 예상된다. 홍성-양평-오대산 충돌대를 경계로 하여 경기육괴 북부와 남부는 모두 콜롬비아 초대륙 형성 후기인 1870-1840 Ma에 대륙충돌이나 섭입 작용에 의해 화성 및 변성작용을 강하게 받았다. 옥천 변성대는 중국 남중국판 내에 나타나는 760Ma 경에 형성된 난후아 열곡대에 대비될 수 있으며 그럴 경우 경기육괴 남부와 영남육괴는 각각 남중국판의 북부 양쯔판과 남부 커테시아판에 대비된다. 최근 경기육괴 변성퇴적암, 옥천변성대 등에서 광역적으로 발견되는 실루리아기-데본기의 쇄설성 저어콘은 경기육괴 내에 데본기 혹은 그 이후 고생대 시기의 퇴적암이 존재할 가능성을 제시하고 있으며 홍성과 광천 지역에서 확인된 데본기의 변성작용과 함께 페름기-트라이아스기의 대륙충돌 이전인 고생대 중기에도 경기육괴에 활발한 지구조 운동이 일어났음을 지시한다.
섬장암은 대륙지각의 주요 구성 성분인 화강암질 암석과는 달리 그 산출에 있어서 희귀성이 인정된다. 이 연구의 목적은 산청 일원의 섬장암에 대한 산상과 기재적 특성을 밝히고 지화학적 연구를 통해 섬장암질 마그마의 성인을 알아보는 것이다. 산청섬장암의 주구성 광물은 알칼리장석(정장석, 미사장석), 사장석, 각섬석, 흑운모, 석영 등이다. 각섬석과 흑운모는 장석과 석영 사이를 채우는 타형의 결정이 관찰되는데, 이는 함수광물이 후기에 정출되었음을 보여주며, 마그마에서 결정화작용 시 초기에는 물이 부족하였음을 나타낸다. 광물성분 분석에 의하면 섬장암의 각섬석은 대부분 페로 에데나이트에 해당하며, 각섬석 지압계를 이용하여 계산한 각섬석의 생성 압력은 3.3~4.9 kb로, 11.9~17.3 km 범위의 정치심도를 나타낸다. 흑운모는 애나이트가 풍부한 영역에 도시되고, 휘석은 헤덴버자이트의 영역에 도시된다. 섬장암은 알칼리계열, 중알루미나형, I-type에 해당한다. 섬장암에 대한 희토류원소와 거미도표에서 관찰되는 패턴은 섬록암 및 화강암과는 차이를 보인다. 연구지역의 섬장암은 하커 변화도에서 공간적으로 인접하고 있는 반려암-섬록암 및 화강암과 다른 변화 경향을 보여준다. 이는 각 암상이 다른 근원 마그마로부터 생성되었을 가능성을 시사한다. 실험적 자료를 근거로 (1) 압력이 높거나 물이 불포화된 조건에서의 부분용융에 의해, (2) 상승하는 마그마에서 잔류멜트의 분리 이동으로 초기정출광물이 잔류할 때, (3) 마그마의 기원물질 또는 기원 장소에서 플루오린(F) 성분이 풍부할 때 섬장암질 마그마를 형성할 수 있다. 이들 중 암석기재적 특징에 근거하여 물이 불포화된 조건에서 부분용융에 의해 산청 섬장암질 마그마를 형성하였을 가능성이 가장 높다고 판단된다.
강원도 영월 남부 지역의 청림 일대와 충북 가창산 일대에는 중기 석탄기의 갑산층이 북북서 방향으로 길게 분포한다. 이 연구는 갑산층 내의 석회암의 구성 입자와 조직 및 지화학적 특징, 그리고 석회암의 부존 상태를 규제하는 지질구조를 파악하기 위해 수행되었다. 갑산층의 석회암은 대체로 담회색 내지 담갈색을 띠며, 세립질의 치밀한 조직을 갖는다. 석회암의 구성 입자는 해백합, 유공충, 방추충, 개형충, 복족류 등의 파편으로 이루어졌다. 부분적으로 재결정 작용을 받아 세립의 결정질 방해석으로 이루어지기도 한다. 갑산층 석회암의 CaO, MgO, Al
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70