• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.136-140
• /
• 2011

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at $700^{\circ}C$ were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.5-14
• /
• 2013

In this paper the effect of UV (ultraviolet) exposure on HDPE (high density polyethylene)-smooth and f-PP (flexible polypropylene) geomembranes is evaluated under UVB-313 (ultraviolet wavelength 290-315 nm) exposure. Tensile property, melt flow index (MFI), oxidation induction time (OIT), both standard-OIT and high pressure-OIT and Fourier transform infrared spectroscopy/attenuated total reflectance (FTIR/ATR) results are discussed. Although tensile properties of the exposed geomembrane samples remained unchanged, the depletion of antioxidants was found higher for f-PP than for HDPE geomembrane. Arrhenius model by extrapolation was used on the data to predict the antioxidant lifetime to a typical site temperature of $20^{\circ}C$. There was no significant difference between the MFI value of the virgin and UV exposed HDPE geomembrane samples but a decrease in MFI was found in f-PP geomembrane that signifies that crosslinking has occurred. From FTIR spectra, the small peak (near $1750\;cm^{-1}$) observed in the spectrum of UV exposed sample corresponds to a carbonyl (C=O) linkage, which suggests that oxidation has occurred in the polymer structure, and another new band for f-PP between 3100 and $3500\;cm^{-1}$ is attributed to a hydroxyl bond and/or hydroperoxide bond.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 1997

Viscous flow around actual ship is calculated by an use of RANS equations. The propriety of this computing method, usefulness to hull form design and the scale effect which is the effect of viscous flow depending on the scale of ship model are investigated. Reynolds stress is modelled by using k-${\varepsilon}$ turbulence model and the law of wall is applied near the body. Body fitted coordinates are introduced for the treatment of the arbitrary 3-dimensional shape of the ship hull form. The transformed equations in the computational domain are numerically solved by an employment of FVM. In the calculation of pressure, SIMPLE method is adopted and the solution of the discretized equation is obtained by the line-by-line method with the use of TDMA The calculations of two ships, 4410 TEU container carrier and 50,000 DWT class bulk carrier, are performed at model and actual ship scale. The results are compared and discussed with the model test results which are viscous resistance, nominal wake distribution at propeller plane and limiting streamline on the hull surface. They describe the effect of stem form and the scale effect very well. In particular, the calculated nominal wake distribution and limiting streamline are agreed qualitatively with the experiments and the viscous resistance values are estimated within ${\pm}5%$ difference from the resistance tests.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.208-211
• /
• 2006

Microalbuminuria is most frequently caused by kidney damage from diabetes. Moreover, many other conditions can lead to kidney damage, such as high blood pressure, heart failure, cirrhosis, or systemic lupus erythematosus (SLE). The measurement of the microalbumin in urine may be useful for the early diagnosis or as a predictor of nephropathy in diabetes. The most common method for getting a quantitative measurement of urinary protein relies on a 24-hour urine collection. The result of this method is accurate. But 24hr urine collection is difficult to obtain and variations in volume are frequent. Also the patients complain about urine collection. We tried to measure reference values for microalbumin using fasting urine and compare them with the albumin/creatinine ratio using 24hr urine. The concentrations of microalbumin in fasting urine and 24hr urine were $7.1{\pm}3.8mg/L$, $5.7{\pm}2.9mg/L$ (r=0.61, p=0.27), respectively. The albumin/creatinine ratios using fasting urine and 24hr urine were $8.7{\pm}4.2{\mu}g/mg$, $8.7{\pm}4.0{\mu}g/mg$ (r=0.76, p=0.88), respectively. This study indicated that the measurement of microalbumin in fasting urine was an easy and simple method for early diagnosis or to predict nephropathy in diabetes. Thus, setting up the reference value using fasting urine may be useful in the screening test for the diabetic nephropathy patients instead of using the 24hr albumin excretion rate (AER).

• Perspectives in Nursing Science
• /
• v.10 no.2
• /
• pp.141-150
• /
• 2013

Purpose: The purpose of this study was to evaluate the differences between the level of satisfaction and concern regarding appearance according to gender, the importance of appearance in job interviews, and the influence appearance has on job-seeking stress and anxiety under the ever-increasing pressure on students to secure employment so that appropriate psychological interventions can be provided to undergraduates. Methods: The survey was conducted on 170 third and fourth year undergraduates in Gyeonggi province from August 31st to September 6th, 2012 to figure out the correlations and differences in variables of appearance satisfaction and concern, and the importance of appearance in job interviews and job-seeking stress and anxiety according to the differences in gender. Data were analyzed by descriptive statistics, independent t-test, two-way ANOVA, and Pearson's correlation analysis. Results: 1. There was difference between the genders for appearance satisfaction and concern. The level of satisfaction was higher in male students while concerns regarding appearance were higher in female students. There was no gender difference regarding the importance of appearance in job interviews, job-seeking stress, and job-seeking anxiety. 2. For the concerns in appearance, there was a significant difference between the genders in appearance management, and gender and the importance of appearance in job interviews showed significant interactive effects. Stress and anxiety from job-seeking did not show significant differences between the genders, but there were common significant interactive effects between gender and grades, gender and employment, and gender and the importance of appearance in job interviews. 3. Both male and female students showed higher job-seeking stress as their job-seeking anxiety was higher. Job-seeking anxiety was higher in male students who had higher concern in appearance, and in female students who placed more emphasis on the importance of appearance in job interviews. Conclusion: As female students perceived appearance in job interviews as important more than male students, their job-seeking anxiety was higher, while male students who showed higher concern in appearance also showed higher level of anxiety in job-seeking. As job-seeking anxiety was higher, job-seeking stress was also higher according to the entire participants, based on this result, methods to decrease job-seeking anxiety should be suggested.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.367-376
• /
• 2011

Huge amount of $CH_4$ mixtures has been emitted from landfills and organic wastes via anaerobic digestion. The recovery of high purity $CH_4$ from these gases has two merits: reduction of green house gases and production of renewable fuels. Membrane technology based on polymeric materials can be used in this application. In this study, asymmetric gas separation hollow fiber membranes were fabricated to develop the membrane-based bio-gas purification process. Polyethersulfone (PES) was chosen as a polymer materials because of high $CO_2$ permeability of 3.4 barrer and $CO_2/CH_4$ selectivity of 50[1]. Acetone was used as a non-solvent additive because of its unique swelling power for PES and highly volatile character. The prepared PES hollow fiber showed excellent separation properties: 36 GPU of $CO_2$ permeance and 46 of $CO_2/CH_4$ selectivity at optimized preparation conditions: 9wt% acetone content, 10cm air-gap and 4wt% PDMS coating processes. With the PES hollow fiber membranes developed, mixed $CO_2/CH_4$ test was done by changing various operating conditions such as pressures and feed compositions to meet the highest recovery of CH4 with 95% purity. High $CH_4$ recovery of 58 wt% was observed at 10 atm feed pressure for the 50 vol% of $CO_2$ in $CO_2/CH_4$ mixture.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.277-284
• /
• 2009

In order to select the most suitable membrane to the concentration of vanadium and silica in groundwater, two different commercial NF membrane modules (NE2540-90 and NF90-2540) and three different commercial RO membrane modules (BW30-2540, RE2540-TE, and XLE-2540) were tested. The membrane characteristics test results showed that NE2540-90 module was the most efficient because of higher permeate flux and similar rejection coefficient. Using NE2540-90 module at the transmembrane pressure of $8\;kgf/cm^2$, it was found that the rejection coefficients of vanadium, silica, aluminium, chromium, iron, boron, strontium, and barium were 98.2%, 99.0%, 92.0%, 83.6%, 96.0%, 45.1%, 98.6%, and 69.5%, respectively. It was possible that vanadium and silica contents of groundwater were concentrated into $148.9\;{\mu}g/L$ and 85.8 mg/L respectively by six-stages NF process at the recovery ratio of 15%. The waters produced by NF, which are enriched in vanadium and silica content, are expected to be commercialized the various functional mineral waters.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.281-290
• /
• 2005

This paper presents experimental and analytical studies on long-term behavior of square CFT columns under central axial loading. Two loading cases are considered; (1) the load applied only at the inner concrete of the column and (2) the load applied simultaneously on both the concrete and the steel tube. Four specimens of square CFT columns were tested under the two loading cases, and basic creep test for two concrete specimens was performed to find out the creep properties of the inner concrete. Three-dimensional finite element analysis models were established and verified with the experimental results. The verification shows that the prediction for the long-term behavior of actual square CFT columns is possible from the three dimensional finite element modeling considering the bond behavior between steel tube and inner concrete. Also, experimental results and numerical calculations revealed that the bond stress Induced by the confinement pressure as well as the slip between inner concrete and steel tube were increased with time In the first loading case. However, the confinement by the loading Plate was decreased with time while increasing confinement effect by the steel tube was observed over time. In contrast no confinement effects occur in the second loading case.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.4
• /
• pp.510-516
• /
• 1995

A multidisciplinary weight control program was conducted for obese women. The major components of the program included low calorie diet therapy, exercise, behavior modification and nutritional education and counseling. Sixteen healthy volunteers in excess of body fat, above 30%, were enrolled in the group support program. But 5 person were dropped out in the 2nd week of treatment. During the 1st week of group orientation, individual cause of obesity was assessed through a computer program including survey of dietary intake, activity, eating habits and life styles. During the 5 weeks of treatment, 4.8kg of average weight loss was accomplished using a following program ; low calorie diet(1200kcal/day with all essential nutrients), low impact aerobic exercise(50~60% of $VO_{2max}$, 1 hour/day in a group, 3~5 days/week), behavior modification of individual life styles and eating habits causing obesity and nutritional education concerning nutrition, role of exercise such as brisk walking, importance of slow eating in regular meal pattern and internal motivation for weight reduction, health risk of obesity and rapid weight loss, weight recycling and yo-yo syndrome, etc. Nutritional conseling was conducted 3 times per week with checking self-records of foods, activity, emotional state and tiredness. Before and immediately after 5 weeks of treatment, blood pressure, fasting blood glucose, cholesterol and triglyceride were measured and comparied with paired t-test. After 5 weeks of treatment, body weight, body mass index, body fat and circumferences of waist, upper arm and hip were significantly decreased. Also LDL-cholesterol was significantly decreased after obesity treatment.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2007

Engineering behaviour of uplift-resisting ground anchors constructed in weathered rocks has been investigated by carrying out a series of full scale pull-out tests. The anchor was to resist uplift forces (buoyancy) associated with high groundwater table acting on the basement of a rail way station. The study has included the ultimate pull-out capacity of the anchors and shear stress transfer mechanism at the anchor-ground interface. The pull-out tests were conducted by changing bonded lengths of the anchor (2~7 m) and diameter of drilled borehole (108~165 mm) to investigate their effects on the behaviour of the anchor. The measured results showed that the ultimate capacity of the anchors was increased with an increase in the bonded length, diameter of drilled borehole as expected. The ultimate capacity of the anchors deduced from the pull-out tests ranged from 392 to 1,569 kN, depending on the above-mentioned factors. This corresponds to the interface shear strength of about 227~505 kPa. Interface shear stresses deduced from the pull-out test showed that the larger the pull-out force, the larger the mobilisation of the interface shear strength. The failure mode of the anchors heavily depended on the bonded lengths of the anchors. When the bonded length was short (2~3 m), a cone-type failure was observed, whereas when the bonded length increased (5~7 m), failure developed at the grout-ground interface.